Page 1 of 2

1   2       Next

Working At Heights

Two-day training course (one of the four GWO BST modules) focuses on the access and egress conditions of a wind turbine environment. Following the Global Wind Organizations lesson plan for working at heights, participants receive the necessary basic knowledge and skills through theory and practical training to use basic PPE and perform safe work at heights and safe comprehensive basic rescue from heights in a remote wind turbine environment. Training Compliance -OSHA 1926 & 1910 Regulations, ANSI Z359 Standards, GWO-BST Version 7. Scheduling: This module can be taken alone or in conjunction with all four GWO modules in a 5-day, 40-hour class. For scheduling, refer to the GWO schedule. Schedules are subject to change. Visit www.OptimumRAS.com for pricing details and/or to register.

DateDays/TimeLocationInstructorCourse IDCourse Section
Jan 15 - Jan 16 MT / 8:00 AM - 5:00 PM Amarillo Bentley Todd P 166067 WIND-1091-2906
Registration isn't currently available for this class.
Please try to register again on:11/14/17

GWO

Wind Energy - Working at Height Safety Training by Optimum Academy Industry recognized Global Wind Organization Basic Safety Training designed to provide personnel with the basic skills that will enable them to work in a safe manner in the wind industry and to meet emergency response training requirements. Consists of four modules that can be taken individually or together. Individual course descriptions are listed separately. GWO1002 Working at Heights GWO3002 First Aid GWO101 Fire Awareness GWO 102 Manual Handling This is all four GWO-BST modules (listed above) taught in conjunction together in a 5-day, 40-Hour course. Successful participants will receive their certifications from ENSA-North America and the Global Wind Organization. Independent modules may be taken individually (classes are individually listed) within the 5-day class. Schedules are subject to change. Visit www.OptimumRAS.com for pricing details and/or to register.

DateDays/TimeLocationInstructorCourse IDCourse Section
Jan 15 - Jan 19 MTWRF / 8:00 AM - 5:00 PM Amarillo Bentley Todd P 166049 WIND-1091-2901
Registration isn't currently available for this class.
Please try to register again on:11/14/17

Fire Awareness/Manual Handling

The aims of this four-hour training course (one of the four GWO BST modules) are to give participants the basic knowledge and skills to prevent fires, conduct initial and appropriate judgment when evaluating a fire, manage evacuation of personnel to ensure all are safely evacuated and accounted for in the event of an unmanageable fire, and, if it us to be judged safe, to efficiently extinguish an initial fire using basic hand-held fire equipment. Training Compliance - ISO 7165:2009, NFPA 10 Standards, GWO-BST Version 7. The aims of this four-hour training course (one of the four GWO BST modules) are to give participants awareness through theoretical and practical training to encourage positive manual handling behavior and perform manual handling activities in a safe manner in the wind turbine industry and environment. Training Compliance - ISO 11228-3:2007, ISO 11228-2:2007, ISO 11228-1:2003, State OSHA Manual Handling Publications (various), NIOSH Publication 2007-131, GWO-BST Version 7. Scheduling: This module can be taken alone or in conjunction with the GWO modules in a 5-day, 40-hour class. For scheduling, refer to the GWO 5 Day schedule. Schedules are subject to change. Visit www.OptimumRAS.com for pricing details and/or to register.

DateDays/TimeLocationInstructorCourse IDCourse Section
Jan 17 - Jan 17 W / 8:00 AM - 5:00 PM Amarillo Bentley Todd P 166072 WIND-1091-2908
Registration isn't currently available for this class.
Please try to register again on:11/14/17

First Aid

Two-day training course (one of the four GWO BST modules) focuses on the access and egress conditions of a wind turbine environment. Following the Global Wind Organizations lesson plan, First Aid is conducted under ENSA's Medic First Aid training curriculum, which is a widely accepted professional training platform incorporated into an ENSA training course under the America Safety & Health Institute. It is an enhancement of the pre-requisite standard American or Canadian Red Cross certification (or other acceptable curriculums) and will prepare students to apply information to emergency situations that involve victim care at heights. Training Compliance - ISO 11.160 First Aid, OSHA 1910.151 Regulations, OSHA Guide 3317-06N 2006, HSI Medic First Aid, GWO-BST Version 7. Scheduling: This module can be taken alone or in conjunction with the GWO module in a 5-day, 40-hour class. For scheduling, refer to the GWO schedule. Schedules are subject to change. Visit www.OptimumRAS.com for pricing details and/or to register.

DateDays/TimeLocationInstructorCourse IDCourse Section
Jan 18 - Jan 19 RF / 8:00 AM - 5:00 PM Amarillo Bentley Todd P 166084 WIND-1091-2910
Registration isn't currently available for this class.
Please try to register again on:11/14/17

Rope Access

Five-day, 40-hour course that prepares candidates for SPRAT (Society of Professional Rope Access Technicians) level I, II, or III certification. Participants will learn a set of techniques where ropes and specialized hardware are used as the primary means of providing access and support to workers. A successful candidate will be able to perform a range of rope access tasks according to their level of training. Schedules are subject to change.

DateDays/TimeLocationInstructorCourse IDCourse Section
Jan 22 - Jan 26 MTWRF / 8:00 AM - 5:00 PM Amarillo Bentley Todd P 166058 WIND-1091-2903
Registration isn't currently available for this class.
Please try to register again on:11/14/17

Working At Heights

Two-day training course (one of the four GWO BST modules) focuses on the access and egress conditions of a wind turbine environment. Following the Global Wind Organizations lesson plan for working at heights, participants receive the necessary basic knowledge and skills through theory and practical training to use basic PPE and perform safe work at heights and safe comprehensive basic rescue from heights in a remote wind turbine environment. Training Compliance -OSHA 1926 & 1910 Regulations, ANSI Z359 Standards, GWO-BST Version 7. Scheduling: This module can be taken alone or in conjunction with all four GWO modules in a 5-day, 40-hour class. For scheduling, refer to the GWO schedule. Schedules are subject to change. Visit www.OptimumRAS.com for pricing details and/or to register.

DateDays/TimeLocationInstructorCourse IDCourse Section
Feb 05 - Feb 06 MT / 8:00 AM - 5:00 PM Amarillo Bentley Todd P 166068 WIND-1091-2907
Registration isn't currently available for this class.
Please try to register again on:11/14/17

GWO

Wind Energy - Working at Height Safety Training by Optimum Academy Industry recognized Global Wind Organization Basic Safety Training designed to provide personnel with the basic skills that will enable them to work in a safe manner in the wind industry and to meet emergency response training requirements. Consists of four modules that can be taken individually or together. Individual course descriptions are listed separately. GWO1002 Working at Heights GWO3002 First Aid GWO101 Fire Awareness GWO 102 Manual Handling This is all four GWO-BST modules (listed above) taught in conjunction together in a 5-day, 40-Hour course. Successful participants will receive their certifications from ENSA-North America and the Global Wind Organization. Independent modules may be taken individually (classes are individually listed) within the 5-day class. Schedules are subject to change. Visit www.OptimumRAS.com for pricing details and/or to register.

DateDays/TimeLocationInstructorCourse IDCourse Section
Feb 05 - Feb 09 MTWRF / 8:00 AM - 5:00 PM Amarillo Bentley Todd P 166053 WIND-1091-2902
Registration isn't currently available for this class.
Please try to register again on:11/14/17

Fire Awareness Manual Handling

The aims of this four-hour training course (one of the four GWO BST modules) are to give participants the basic knowledge and skills to prevent fires, conduct initial and appropriate judgment when evaluating a fire, manage evacuation of personnel to ensure all are safely evacuated and accounted for in the event of an unmanageable fire, and, if it us to be judged safe, to efficiently extinguish an initial fire using basic hand-held fire equipment. Training Compliance - ISO 7165:2009, NFPA 10 Standards, GWO-BST Version 7. The aims of this four-hour training course (one of the four GWO BST modules) are to give participants awareness through theoretical and practical training to encourage positive manual handling behavior and perform manual handling activities in a safe manner in the wind turbine industry and environment. Training Compliance - ISO 11228-3:2007, ISO 11228-2:2007, ISO 11228-1:2003, State OSHA Manual Handling Publications (various), NIOSH Publication 2007-131, GWO-BST Version 7. Scheduling: This module can be taken alone or in conjunction with the GWO modules in a 5-day, 40-hour class. For scheduling, refer to the GWO 5 Day schedule. Schedules are subject to change. Visit www.OptimumRAS.com for pricing details and/or to register.

DateDays/TimeLocationInstructorCourse IDCourse Section
Feb 07 - Feb 07 W / 8:00 AM - 5:00 PM Amarillo Bentley Todd P 166073 WIND-1091-2909
Registration isn't currently available for this class.
Please try to register again on:11/14/17

First Aid

Two-day training course (one of the four GWO BST modules) focuses on the access and egress conditions of a wind turbine environment. Following the Global Wind Organizations lesson plan, First Aid is conducted under ENSA's Medic First Aid training curriculum, which is a widely accepted professional training platform incorporated into an ENSA training course under the America Safety & Health Institute. It is an enhancement of the pre-requisite standard American or Canadian Red Cross certification (or other acceptable curriculums) and will prepare students to apply information to emergency situations that involve victim care at heights. Training Compliance - ISO 11.160 First Aid, OSHA 1910.151 Regulations, OSHA Guide 3317-06N 2006, HSI Medic First Aid, GWO-BST Version 7. Scheduling: This module can be taken alone or in conjunction with the GWO module in a 5-day, 40-hour class. For scheduling, refer to the GWO schedule. Schedules are subject to change. Visit www.OptimumRAS.com for pricing details and/or to register.

DateDays/TimeLocationInstructorCourse IDCourse Section
Feb 08 - Feb 09 RF / 8:00 AM - 5:00 PM Amarillo Bentley Todd P 166085 WIND-1091-2911
Registration isn't currently available for this class.
Please try to register again on:11/14/17

Working At Heights

Two-day training course designed around the specific requirements of the wind industry, this ENSA work and rescue at height training course delivers the foundation training for technicians who work at height within construction or general industry on wind turbines. During the course, students are taught the dangers of working at height on a wind turbine and provided with the essential underpinning knowledge required to work safely within this environment. Training covers use of personal protective equipment for working safely at height and fall rescue equipment for personal escape or casualty rescue requirements. Training also demonstrates appropriate decision making when addressing fall hazards through the adoption of preventative safety culture. ENSA Training within Fall Protection, Safe Access & Rescue for wind turbine technicians covers Type 1, 2, 3 and 4 of the four types of rescue defined by the Work at Height Safety Association (WAHSA): 1. Lowering a remote casualty 2. Raising a remote casualty 3. Self-evacuation by descent 4. Rescuing another in descent. The training also develops team rescue strategies, procedures and protocol essential to implementation of a successful rescue. Training Compliance - OSHA 1926 Subpart M & 1910 Subpart D Regulations, ANSI Z359 Standards. Scheduling: This module can be taken alone or in conjunction with all three Bundled 3 modules in a 5-day, 40-hour class. For scheduling, refer to the Bundled 3 schedule. Schedules are subject to change. Visit www.OptimumRAS.com for pricing details and/or to register.

DateDays/TimeLocationInstructorCourse IDCourse Section
Feb 12 - Feb 13 MT / 8:00 AM - 5:00 PM Amarillo Bentley Todd P 166089 WIND-1091-2912
Registration isn't currently available for this class.
Please try to register again on:11/14/17

Bundled 3

Wind Energy - Working at Height Safety Training by Optimum Academy Industry recognized training designed to provide personnel with basic and advanced skills that will enable them to work in a safe manner in the wind industry and to meet emergency response training requirements. Successful participants will receive their certifications from ENSA-North America, the industry leaders in work-at-height safety training. Consists of three modules that can be taken individually or together. Individual course descriptions are listed separately. WE1002 Working at Heights CSER 1002 Confined Space Entry and Rescue (Wind Turbine) TH1001 Trauma at Height (Tower & Wind Turbines) This is all three modules (listed above) taught in conjunction together in a 5-day, 40-Hour course. Independent modules may be taken individually within the 5-day class. Schedules are subject to change. Visit www.OptimumRAS.com for pricing details and/or to register.

DateDays/TimeLocationInstructorCourse IDCourse Section
Feb 12 - Feb 15 MTWRF / 8:00 AM - 5:00 PM Amarillo Bentley Todd P 166063 WIND-1091-2905
Registration isn't currently available for this class.
Please try to register again on:11/14/17

Trauma At Height

One-day training course (may be 10 hrs.) which is required for personnel who are expected to respond to incidences of serious traumatic injuries and medical emergencies at height that could possibly occur in wind turbines. It is designed around specific requirements and exposures particular to wind turbines and other work at height structures where working in confinement is a requirement. It affirms through practical assessment and problem-solving exercises, the capability of participants to safely assess an emergency, communicate the need for additional resources, provide needed care for life threatening conditions, and effectively manage victim movement to the ground when necessary. This is an enhancement of the standard American or Canadian Red Cross certification (or other acceptable curriculums) and will prepare students to apply information from previous first aid and CPR/AED training to emergency situations that involve victim care at heights. This is particularly important when responding emergency medical services may be delayed by long travel distances, challenging terrain, and limited by lack of training to provide advanced medical care in elevated work spaces. Prerequisite: WE1002 or equivalent. Training Compliance: American and Canadian Red Cross Standard (or equivalent), 40 CFR 1910.151, ANSI Z490.1-2009, ANSI Z359 Standards Scheduling: This module can be taken alone or in conjunction with all three Bundled 3 modules in a 5-day, 40-hour class. For scheduling, refer to the Bundled 3 schedule. Schedules are subject to change. Visit www.OptimumRAS.com for pricing details and/or to register.

DateDays/TimeLocationInstructorCourse IDCourse Section
Feb 14 - Feb 14 W / 8:00 AM - 5:00 PM Amarillo Bentley Todd P 166093 WIND-1091-2913
Registration isn't currently available for this class.
Please try to register again on:11/14/17

Confined Space Rescue Wind Tur

Two-day training course designed to address the challenges of confined spaces within wind turbines. This course caters specifically to the confined space entry and rescue requirements for operating in both permit required and restricted spaces. When available, the training will cover the written specific confined space entry program, turbine specific hazard assessments, entry permits and safe work procedures. Prerequisite: WE1002 or equivalent. Training Compliance - OSHA 1910.146, OSHA 1926.1203, ANSI Z359 Scheduling: This module can be taken alone or in conjunction with all three Bundled 3 modules in a 5-day, 40-hour class. For scheduling, refer to the Bundled 3 schedule. Schedules are subject to change. Visit www.OptimumRAS.com for pricing details and/or to register.

DateDays/TimeLocationInstructorCourse IDCourse Section
Feb 15 - Feb 16 RF / 8:00 AM - 5:00 PM Amarillo Bentley Todd P 166097 WIND-1091-2914
Registration isn't currently available for this class.
Please try to register again on:11/14/17

Rope Access

Five-day, 40-hour course that prepares candidates for SPRAT (Society of Professional Rope Access Technicians) level I, II, or III certification. Participants will learn a set of techniques where ropes and specialized hardware are used as the primary means of providing access and support to workers. A successful candidate will be able to perform a range of rope access tasks according to their level of training. Schedules are subject to change. Visit www.OptimumRAS.com for pricing details and/or to register.

DateDays/TimeLocationInstructorCourse IDCourse Section
Feb 19 - Feb 23 MTWRF / 8:00 AM - 5:00 PM Amarillo Bentley Todd P 166059 WIND-1091-2904
Registration isn't currently available for this class.
Please try to register again on:11/14/17

Working At Heights

Two-day training course (one of the four GWO BST modules) focuses on the access and egress conditions of a wind turbine environment. Following the Global Wind Organizations lesson plan for working at heights, participants receive the necessary basic knowledge and skills through theory and practical training to use basic PPE and perform safe work at heights and safe comprehensive basic rescue from heights in a remote wind turbine environment. Training Compliance -OSHA 1926 & 1910 Regulations, ANSI Z359 Standards, GWO-BST Version 7. Scheduling: This module can be taken alone or in conjunction with all four GWO modules in a 5-day, 40-hour class. For scheduling, refer to the GWO schedule. Schedules are subject to change. Visit www.OptimumRAS.com for pricing details and/or to register.

DateDays/TimeLocationInstructorCourse IDCourse Section
Mar 05 - Mar 06 MT / 8:00 AM - 5:00 PM Amarillo Bentley Todd P 166069 WIND-1091-3909
Registration isn't currently available for this class.
Please try to register again on:11/14/17

GWO

DateDays/TimeLocationInstructorCourse IDCourse Section
Mar 05 - Mar 09 MTWRF / 8:00 AM - 5:00 PM Amarillo Bentley Todd P 166054 WIND-1091-3901
Registration isn't currently available for this class.
Please try to register again on:11/14/17

Fire Awareness Manual Handling

The aims of this four-hour training course (one of the four GWO BST modules) are to give participants the basic knowledge and skills to prevent fires, conduct initial and appropriate judgment when evaluating a fire, manage evacuation of personnel to ensure all are safely evacuated and accounted for in the event of an unmanageable fire, and, if it us to be judged safe, to efficiently extinguish an initial fire using basic hand-held fire equipment. Training Compliance - ISO 7165:2009, NFPA 10 Standards, GWO-BST Version 7. The aims of this four-hour training course (one of the four GWO BST modules) are to give participants awareness through theoretical and practical training to encourage positive manual handling behavior and perform manual handling activities in a safe manner in the wind turbine industry and environment. Training Compliance - ISO 11228-3:2007, ISO 11228-2:2007, ISO 11228-1:2003, State OSHA Manual Handling Publications (various), NIOSH Publication 2007-131, GWO-BST Version 7. Scheduling: This module can be taken alone or in conjunction with the GWO modules in a 5-day, 40-hour class. For scheduling, refer to the GWO 5 Day schedule. Schedules are subject to change. Visit www.OptimumRAS.com for pricing details and/or to register.

DateDays/TimeLocationInstructorCourse IDCourse Section
Mar 07 - Mar 07 W / 8:00 AM - 5:00 PM Amarillo Bentley Todd P 166075 WIND-1091-3912
Registration isn't currently available for this class.
Please try to register again on:11/14/17

First Aid

Two-day training course (one of the four GWO BST modules) focuses on the access and egress conditions of a wind turbine environment. Following the Global Wind Organizations lesson plan, First Aid is conducted under ENSA's Medic First Aid training curriculum, which is a widely accepted professional training platform incorporated into an ENSA training course under the America Safety & Health Institute. It is an enhancement of the pre-requisite standard American or Canadian Red Cross certification (or other acceptable curriculums) and will prepare students to apply information to emergency situations that involve victim care at heights. Training Compliance - ISO 11.160 First Aid, OSHA 1910.151 Regulations, OSHA Guide 3317-06N 2006, HSI Medic First Aid, GWO-BST Version 7. Scheduling: This module can be taken alone or in conjunction with the GWO module in a 5-day, 40-hour class. For scheduling, refer to the GWO schedule. Schedules are subject to change. Visit www.OptimumRAS.com for pricing details and/or to register.

DateDays/TimeLocationInstructorCourse IDCourse Section
Mar 08 - Mar 09 RF / 8:00 AM - 5:00 PM Amarillo Bentley Todd P 166086 WIND-1091-3915
Registration isn't currently available for this class.
Please try to register again on:11/14/17

Working At Heights

Two-day training course designed around the specific requirements of the wind industry, this ENSA work and rescue at height training course delivers the foundation training for technicians who work at height within construction or general industry on wind turbines. During the course, students are taught the dangers of working at height on a wind turbine and provided with the essential underpinning knowledge required to work safely within this environment. Training covers use of personal protective equipment for working safely at height and fall rescue equipment for personal escape or casualty rescue requirements. Training also demonstrates appropriate decision making when addressing fall hazards through the adoption of preventative safety culture. ENSA Training within Fall Protection, Safe Access & Rescue for wind turbine technicians covers Type 1, 2, 3 and 4 of the four types of rescue defined by the Work at Height Safety Association (WAHSA): 1. Lowering a remote casualty 2. Raising a remote casualty 3. Self-evacuation by descent 4. Rescuing another in descent. The training also develops team rescue strategies, procedures and protocol essential to implementation of a successful rescue. Training Compliance - OSHA 1926 Subpart M & 1910 Subpart D Regulations, ANSI Z359 Standards. Scheduling: This module can be taken alone or in conjunction with all three Bundled 3 modules in a 5-day, 40-hour class. For scheduling, refer to the Bundled 3 schedule. Schedules are subject to change. Visit www.OptimumRAS.com for pricing details and/or to register.

DateDays/TimeLocationInstructorCourse IDCourse Section
Mar 12 - Mar 13 MT / 8:00 AM - 5:00 PM Amarillo Bentley Todd P 166090 WIND-1091-3918
Registration isn't currently available for this class.
Please try to register again on:11/14/17

Bundled 3

Wind Energy - Working at Height Safety Training by Optimum Academy Industry recognized training designed to provide personnel with basic and advanced skills that will enable them to work in a safe manner in the wind industry and to meet emergency response training requirements. Successful participants will receive their certifications from ENSA-North America, the industry leaders in work-at-height safety training. Consists of three modules that can be taken individually or together. Individual course descriptions are listed separately. WE1002 Working at Heights CSER 1002 Confined Space Entry and Rescue (Wind Turbine) TH1001 Trauma at Height (Tower & Wind Turbines) This is all three modules (listed above) taught in conjunction together in a 5-day, 40-Hour course. Independent modules may be taken individually within the 5-day class. Schedules are subject to change. Visit www.OptimumRAS.com for pricing details and/or to register.

DateDays/TimeLocationInstructorCourse IDCourse Section
Mar 12 - Mar 16 MTWRF / 8:00 AM - 5:00 PM Amarillo Bentley Todd P 166064 WIND-1091-3906
Registration isn't currently available for this class.
Please try to register again on:11/14/17

Trauma At Height

One-day training course (may be 10 hrs.) which is required for personnel who are expected to respond to incidences of serious traumatic injuries and medical emergencies at height that could possibly occur in wind turbines. It is designed around specific requirements and exposures particular to wind turbines and other work at height structures where working in confinement is a requirement. It affirms through practical assessment and problem-solving exercises, the capability of participants to safely assess an emergency, communicate the need for additional resources, provide needed care for life threatening conditions, and effectively manage victim movement to the ground when necessary. This is an enhancement of the standard American or Canadian Red Cross certification (or other acceptable curriculums) and will prepare students to apply information from previous first aid and CPR/AED training to emergency situations that involve victim care at heights. This is particularly important when responding emergency medical services may be delayed by long travel distances, challenging terrain, and limited by lack of training to provide advanced medical care in elevated work spaces. Prerequisite: WE1002 or equivalent. Training Compliance: American and Canadian Red Cross Standard (or equivalent), 40 CFR 1910.151, ANSI Z490.1-2009, ANSI Z359 Standards Scheduling: This module can be taken alone or in conjunction with all three Bundled 3 modules in a 5-day, 40-hour class. For scheduling, refer to the Bundled 3 schedule. Schedules are subject to change. Visit www.OptimumRAS.com for pricing details and/or to register.

DateDays/TimeLocationInstructorCourse IDCourse Section
Mar 14 - Mar 14 W / 8:00 AM - 5:00 PM Amarillo Bentley Todd P 166094 WIND-1091-3921
Registration isn't currently available for this class.
Please try to register again on:11/14/17

Confined Space Rescue Wind Tur

Two-day training course designed to address the challenges of confined spaces within wind turbines. This course caters specifically to the confined space entry and rescue requirements for operating in both permit required and restricted spaces. When available, the training will cover the written specific confined space entry program, turbine specific hazard assessments, entry permits and safe work procedures. Prerequisite: WE1002 or equivalent. Training Compliance - OSHA 1910.146, OSHA 1926.1203, ANSI Z359 Scheduling: This module can be taken alone or in conjunction with all three Bundled 3 modules in a 5-day, 40-hour class. For scheduling, refer to the Bundled 3 schedule. Schedules are subject to change. Visit www.OptimumRAS.com for pricing details and/or to register.

DateDays/TimeLocationInstructorCourse IDCourse Section
Mar 15 - Mar 16 RF / 8:00 AM - 5:00 PM Amarillo Bentley Todd P 166098 WIND-1091-3924
Registration isn't currently available for this class.
Please try to register again on:11/14/17

Working At Heights

Two-day training course (one of the four GWO BST modules) focuses on the access and egress conditions of a wind turbine environment. Following the Global Wind Organizations lesson plan for working at heights, participants receive the necessary basic knowledge and skills through theory and practical training to use basic PPE and perform safe work at heights and safe comprehensive basic rescue from heights in a remote wind turbine environment. Training Compliance -OSHA 1926 & 1910 Regulations, ANSI Z359 Standards, GWO-BST Version 7. Scheduling: This module can be taken alone or in conjunction with all four GWO modules in a 5-day, 40-hour class. For scheduling, refer to the GWO schedule. Schedules are subject to change. Visit www.OptimumRAS.com for pricing details and/or to register.

DateDays/TimeLocationInstructorCourse IDCourse Section
Apr 02 - Apr 03 MT / 8:00 AM - 5:00 PM Amarillo Bentley Todd P 166070 WIND-1091-3910
Registration isn't currently available for this class.
Please try to register again on:11/14/17

GWO

Wind Energy - Working at Height Safety Training by Optimum Academy Industry recognized Global Wind Organization Basic Safety Training designed to provide personnel with the basic skills that will enable them to work in a safe manner in the wind industry and to meet emergency response training requirements. Consists of four modules that can be taken individually or together. Individual course descriptions are listed separately. GWO1002 Working at Heights GWO3002 First Aid GWO101 Fire Awareness GWO 102 Manual Handling This is all four GWO-BST modules (listed above) taught in conjunction together in a 5-day, 40-Hour course. Successful participants will receive their certifications from ENSA-North America and the Global Wind Organization. Independent modules may be taken individually (classes are individually listed) within the 5-day class. Schedules are subject to change. Visit www.OptimumRAS.com for pricing details and/or to register.

DateDays/TimeLocationInstructorCourse IDCourse Section
Apr 02 - Apr 06 MTWRF / 8:00 AM - 5:00 PM Amarillo Bentley Todd P 166055 WIND-1091-3902
Registration isn't currently available for this class.
Please try to register again on:11/14/17

Fire Awareness Manual Handling

The aims of this four-hour training course (one of the four GWO BST modules) are to give participants the basic knowledge and skills to prevent fires, conduct initial and appropriate judgment when evaluating a fire, manage evacuation of personnel to ensure all are safely evacuated and accounted for in the event of an unmanageable fire, and, if it us to be judged safe, to efficiently extinguish an initial fire using basic hand-held fire equipment. Training Compliance - ISO 7165:2009, NFPA 10 Standards, GWO-BST Version 7. The aims of this four-hour training course (one of the four GWO BST modules) are to give participants awareness through theoretical and practical training to encourage positive manual handling behavior and perform manual handling activities in a safe manner in the wind turbine industry and environment. Training Compliance - ISO 11228-3:2007, ISO 11228-2:2007, ISO 11228-1:2003, State OSHA Manual Handling Publications (various), NIOSH Publication 2007-131, GWO-BST Version 7. Scheduling: This module can be taken alone or in conjunction with the GWO modules in a 5-day, 40-hour class. For scheduling, refer to the GWO 5 Day schedule. Schedules are subject to change. Visit www.OptimumRAS.com for pricing details and/or to register.

DateDays/TimeLocationInstructorCourse IDCourse Section
Apr 04 - Apr 04 W / 8:00 AM - 5:00 PM Amarillo Bentley Todd P 166077 WIND-1091-3913
Registration isn't currently available for this class.
Please try to register again on:11/14/17
1   2       Next