Engineering Mechanics II (Dynamics) Syllabus for 2021-2022
Return to Syllabus List

Instructor Information

Office Location


Office Hours

TR 3:15-5:15

Course Information

COVID-19 Protocols

Recording Policy

Disability Statement

If you have a disability (learning, mental, physical) that affects your ability to participate effectively and have access to any program or service at Amarillo College please contact Disability Services at (806) 345-5639 . Our offices are located in the Student Service Center office 112. More information may be found at
Disability Services facilitates access to all programs and services according to the ADA, Americans with Disabilities Act and Section 504 of the Rehabilitation Act, as well as other federal and state laws.

Amarillo College Web Accessibility Policy Statement

Amarillo College is committed to providing equal access to all programs and services, including all working, learning, and service environments that affect equal access for persons with disabilities. This commitment to provide equal access and opportunity for persons with disabilities is in compliance with federal and state law. Amarillo College also strives to provide Electronic and Information Resources (EIR) that are accessible to all authorized users.

If you find you are unable to access material in an accessible format please contact the Disability Services Office at (806) 345-5639 . This office will work in conjunction with other campus resources to address and accommodate your issue in a timely manner.

Statement for Mental Health and Advocacy & Resource Center:

As a student you may experience a range of issues that can cause barriers to learning, such as strained relationships, increased anxiety, alcohol/drug problems, feeling down, difficulty concentrating and/or lack of motivation. These mental health concerns or stressful events may lead to diminished academic performance or reduce a student's ability to participate in daily activities. Amarillo College offers services to assist you with addressing these and other concerns you may be experiencing. If you or someone you know are suffering from any of the aforementioned conditions, you can learn more about the broad range of confidential mental health services available on campus by calling the AC Counseling Center at 806-371-5900. The AC Counseling Center website is . Also, if you are in need of social services (affordable housing, utilities, transportation, food, clothing, childcare, medical/dental/vision, legal), please call the AC Advocacy & Resource Center at 806-371-5439. The AC Advocacy & Resource Center website is

Amarillo College Tutoring for Success Policy:

The Tutoring for Success policy applies to any student whose grade or performance in the course falls below a departmentally determined minimum threshold. In either of those cases, the instructor will direct the student to the appropriate tutoring service, which may be faculty-led, discipline-specific, and/or general. Under this policy, the instructor will follow specific departmental guidelines governing the use, duration, and grade component of the tutoring need.

Administrative Drop Policy

Students who do not attend class on or prior to the census date will be administratively dropped. Effective Fall, 2016

Student Withdrawal Procedures

Students who wish to withdraw from a course must complete all steps indicated on the Academic Withdrawal Request form by the course withdrawal deadline.

NOTE: Students who are attending Texas institutions of higher education, for the first time fall 2007 and later, may not withdraw from more than six courses during their academic career. This withdrawal limitation does not include dual credit or developmental classes (Senate Bill 1231 Rule 4.10.) For more information on Drop and Withdrawal Policies, please visit the Registrar's Office Web site.

Privacy Statement

The Amarillo College Privacy Policy is found at , and applies to all Amarillo College students.  If you have questions about this privacy statement or you believe that your personal information has been released without your consent, send email to .


ENGR-2302-002 Engineering Mechanics II (Dynamics)


Prerequisites: ENGR 2301-minimum grade of C

Course Description

Basic theory of engineering mechanics, using calculus, involving the motion of particles, rigid bodies and systems of particles; Newton's Laws; work and energy relationships; principles of impulse and momentum; application of kinetics and kinematics to the solution of engineering problems.

Student ResourcesStudent Resources Website

Department Expectations

Occupational License Disclaimer

Notice to Students enrolled in an educational program for preparation of issuance of certain occupational licenses:

Students enrolled in an educational program in preparation for obtaining certain occupational licenses are potentially ineligible for such license if the student has been convicted of an offense. For further information, please contact:

Melodie Graves
Justice Involved Advocate
Student Service Center 117
Make appointment at

You can also contact the Legal Clinic, or the faculty member in charge of the educational program that you seek to enroll in. The further information you will receive will include notification to you of your right to request a criminal history evaluation letter from the licensing authority in order to clarify your particular situation.


(3 sem hrs; 3 lec)

Class Type

Tech Supported

Syllabus Information


Engineering Mechanics: Dynamics, 14th Edition

Russell C. Hibbeler

©2016 Pearson

Standalone Text:

Format: Cloth

ISBN-13: 9780133915389

OR: Engineering Mechanics: Statics and Dynamics,  14th edition; also by Hibbeler; publisher: Pearson, 2016 (a combined Statics and Dynamics text )


1. Graphing calculator (optional)

2. Engineering graph paper or white copy/printer paper

3. A good eraser

4. A sharp # 2.5 pencil or a mechanical pencil with 0.5 or 0.7 HB lead

Student Performance

Upon successful completion of this course, the students will:

1. Express dynamic quantities as vectors in terms of Cartesian components, polar coordinates, and normaltangential


2. Compute mass moments of inertia for systems of particles and rigid bodies.

3. Solve kinematic problems involving rectilinear and curvilinear motion of particles.

4. Solve kinetic problems involving a system of particles using Newton's Second Law.

5. Apply the principles of work and energy, conservation of energy, impulse and momentum, and conservation of

momentum to the solution of engineering problems involving particles and systems of particles.

6. Solve kinematic problems involving the translation and rotation of a rigid body.

7. Solve kinetic problems involving planar translation and rotation of rigid bodies.

8. Apply the principles of work and energy, conservation of energy, impulse and momentum, and conservation of

momentum to the solution of engineering problems involving rigid bodies in planar motion.

Students Rights and Responsibilities

Student Rights and Responsibilities

Log in using the AC Connect Portal

In order to receive your AC Connect Email, you must log in through AC Connect at .

If you are an active staff or faculty member according to Human Resources, use "Exchange". All other students, use "AC Connect (Google) Email".

Expected Student Behavior

Students are expected to behave in the classroom in a manner that is supportive of the learning environment.

Behaviors that are not supportive include, but are not limited to: tardiness/leaving early; electronic device noises;

texting or using electronic devices in non-course related activities during lecture; talking during the lecture; abusive,

offensive, and/or disrespectful language or demeanor toward AC faculty, staff, students, and/or Amarillo College


In order to receive credit for a course, all material listed on the syllabus must be covered. The instructor sets the pace

to ensure that these requirements are met. Complaining about the pace will not result in less material being covered.

Students who fail to comply with the standards outlined in the syllabus and/or AC’s Student Rights & Responsibilities

document will be subject to disciplinary action which may include, but is not limited to: removal from the classroom;

consultation with the Math & Engineering Department Chair and/or other AC authority; withdrawal from the course

and/or Amarillo College.

Grading Criteria

The final grades of A (90-100), B (80-89), C (70-79), D (60-69), and F (below 60) will be computed as the average of the earned grades

as follows:

Homework and Class Exercises/Quizzes 50%

Robotics Project 10%

Attendance 05%

Exams 15% ( 3 @ 5% each)

Final Project (No Final Exam) 20%


There will be three major exams and there will be no comprehensive final. The summative assessment for the course

is a final semester project, to be selected in consultation with the instructor.

Major exams may be administered in class (in which case they must be completed by the end of class), in the math

testing center, or as a take home test.

Absence from an exam will incur a zero unless there is prior notification of the instructor with approval granted or there is an emergency

that could not be circumvented. Students who miss an exam because of College or business related activities should notify the

instructor before the absence occurs. Make-up exams will be given only under rare, extenuating circumstances and at the discretion of

the instructor (after written petition for consideration).

If a student makes below 70 on a major exam, the student will be asked to spend one hour in our Math Academic

Success Center before the next major exam. During this hour, the student may correct the major exam, work on

homework, prepare for a future in class quiz and/or prepare for the next major exam. Please notify your instructor of

your completion of the required hour in the Math Academic Success Center before the next major exam.

Life Long Learning Style Activities:

EXTRA CREDIT POSSIBILITIES: Engineers continue lifelong learning throughout their careers. To this end, develop the habit

now of attending workshops, touring work sites, interviewing clients, etc. To support the goal of lifelong learning outside of the

classroom, the Engineering Department may provide opportunities for activities including, but not limited to: club meetings,

community service, meetings with advisors/mentors, independent projects such as preparation of a possible schedule to

complete your degree, and tours to broaden your education. If you do take advantage of these opportunities, fill out a short

report form for each activity attended to receive extra credit.


Expect to have homework assigned each day. Please note the homework format requirements at the end of this

document. You are responsible for the requirements. There will be in-class grades such as "pop" tests, quizzes or inclass

exercises that will be averaged into the homework grade. If there is a pop test, it will be given during the first 5

minutes of class and cannot be made up so please be on time. I will drop a total of four homework/quiz grades so

please use them wisely.

As an engineer you will be required to submit proposals and complete forms as part of your job requirements. As you will be

representing your company, your ability to follow rules and regulations of the various forms could adversely affect the company’s

ability to be seriously considered for jobs, projects, etc. It is imperative that you learn to follow requirements for your


I will provide examples of the proper format to visualize the instructions I give below.

Homework shall be presented using one of three types of paper (1) engineering (quadrille) paper, (2) white printer/copier paper,

or (3) lined notebook paper. Do your work in pencil NOT PEN. If an error is made, erase thoroughly. Homework with

scratched out work will NOT be accepted.

Each problem should be started on a new page.

Homework presentations shall be as follows:

* Heading on each page. See the examples provided separately.

Please show all significant steps in a single column on the left side of the page. It should be clear why each step is


* There should be one = sign per line as you move down the page and simplify. You do not simplify by working across

the page with multiple = signs. That is not a professional format.

* Redraw figures in the right of the analysis steps and clearly label as needed with dimensions, labels, and units.

* Underline important intermediate results, as needed.

* Box (not circle) final results.

* NOTE: If I can't read it, I can't grade it.

* The instructor reserves the right to grade any number of problem(s) per assignment.

* Collaboration between students is allowed (indeed, encouraged!) on problem solving; however, EACH STUDENT must hand in an

ORIGINAL, COMPLETE, problem set not a carbon copy of another student's nor the solutions manual.

* NO CREDIT will be given for late homework.

Grading of Tests:

In complex problem analyses, such as those used in this course, there are many opportunities for errors. Thus exams

will be graded using "partial credit" as it is recognized that some sections of an individual problem may have been

carried out correctly even though the final answer may be incorrect. Partial credit will only be given if the student work

is logically developed, with clear and well marked diagrams, with the appropriate fundamental and auxiliary equations

prominently displayed, where the substitutions into the equations are quite clear, and the assumptions used are

quite obvious to the grader when grading. That is, it is the student's responsibility to present his/her work so clearly

that the grader can quickly ascertain the location and nature of the error(s) and can easily follow the subsequent work

through to the now-incorrect solution of the problem. Thus, the student's contribution, needed to obtain partial credit,

is to be able to clearly lead the grader through the student's thought process on the exam page alone. If this is

not quite clear on the work submitted, credit will not be given then nor later.

INSTRUCTOR'S RIGHT TO MODIFY: The instructor has the right to add, delete, or revise segments of this course



Attendance is important and constitutes 5% of the course grade.  You must attend to be allowed the opportunity to take the pop tests, complete assigned in-class activities, as well as hear the lecture and homework assignments

Expect to have homework assigned each day. Please note the homework format requirements. You are responsible

for the requirements. A number of in-class quizzes may be given during lecture periods. These will count as extra

homework. Homework and in-class exam grades will constitute 50% of the course grade.

Please remember the deadline for dropping a class at Amarillo College. If you stop attending class and do not officially drop the course by this deadline, and your average is below a 60, you will receive an F for the course.

Attendance is essential for successful completion of this course. In order to promote consistent attendance,

homework is regularly assigned and in-class quizzes may be given. Late homework is not accepted and

in-class quizzes may not be made up. Homework may be submitted and exams taken in advance when absences are

due to a scheduled event.


Additional Information

Syllabus Created on:

01/17/22 6:32 PM

Last Edited on:

01/17/22 6:57 PM