Introduction to Automotive Technology Syllabus for 2016-2017
Return to Syllabus List

Instructor Information

Instructor

Joseph Jacob (Curriculum Vitae)

E-Mail

jbjacob@actx.edu

Phone

8063354219

Office Location

Transportation Career Center 109A

Office Hours

1pm to 2pm M, T, W, R

Course Information

COVID-19 Protocols

Recording Policy

Disability Statement

If you have a disability (learning, mental, physical) that affects your ability to participate effectively and have access to any program or service at Amarillo College please contact Disability Services at (806) 345-5639 . Our offices are located in the Student Service Center office 112. More information may be found at www.actx.edu/disability.
Disability Services facilitates access to all programs and services according to the ADA, Americans with Disabilities Act and Section 504 of the Rehabilitation Act, as well as other federal and state laws.

Amarillo College Web Accessibility Policy Statement

Amarillo College is committed to providing equal access to all programs and services, including all working, learning, and service environments that affect equal access for persons with disabilities. This commitment to provide equal access and opportunity for persons with disabilities is in compliance with federal and state law. Amarillo College also strives to provide Electronic and Information Resources (EIR) that are accessible to all authorized users.

If you find you are unable to access material in an accessible format please contact the Disability Services Office at (806) 345-5639 . This office will work in conjunction with other campus resources to address and accommodate your issue in a timely manner.

Statement for Mental Health and Advocacy & Resource Center:

As a student you may experience a range of issues that can cause barriers to learning, such as strained relationships, increased anxiety, alcohol/drug problems, feeling down, difficulty concentrating and/or lack of motivation. These mental health concerns or stressful events may lead to diminished academic performance or reduce a student's ability to participate in daily activities. Amarillo College offers services to assist you with addressing these and other concerns you may be experiencing. If you or someone you know are suffering from any of the aforementioned conditions, you can learn more about the broad range of confidential mental health services available on campus by calling the AC Counseling Center at 806-371-5900. The AC Counseling Center website is https://www.actx.edu/counseling/ . Also, if you are in need of social services (affordable housing, utilities, transportation, food, clothing, childcare, medical/dental/vision, legal), please call the AC Advocacy & Resource Center at 806-371-5439. The AC Advocacy & Resource Center website is https://www.actx.edu/arc

Amarillo College Tutoring for Success Policy:

Administrative Drop Policy

Students who do not attend class on or prior to the census date will be administratively dropped. Effective Fall, 2016

Student Withdrawal Procedures

Students who wish to withdraw from a class must:

  • consult with their instructor to obtain a signed academic withdrawal request form to submit to the AskAC department for processing
  • consult with the financial aid office if receiving financial aid
  • consult with the Veterans Benefit Coordinator if receiving veteran benefits
  • consult with their academic advisor to determine how withdrawing may affect their enrollment in future semesters
    • NOTE:  The Texas Education Code stipulates that students attending Texas institutions of higher education for the first time fall 2007 and later may not withdraw from more than six courses during their academic career, including courses from which transfer students have withdrawn at other Texas institutions of higher education. (Senate Bill 1231) Rule 4.10.

Privacy Statement

The Amarillo College Privacy Policy is found at https://www.actx.edu/-amarillo-college-privacy-notice , and applies to all Amarillo College students.  If you have questions about this privacy statement or you believe that your personal information has been released without your consent, send email to humanresources@actx.edu .

Course

AUMT-1305-002 Introduction to Automotive Technology

Prerequisites

Course Description

An introduction to the automotive industry including automotive history, safety practices, shop equipment and tools, vehicle subsystems, service publications, professional responsibilities and basic automotive maintenance. May be taught manufacturer specific.

Student ResourcesStudent Resources Website

Department Expectations

Occupational License Disclaimer

Hours

(3 sem hrs; 2 lec, 2 lab)

Class Type

On Campus Course

Syllabus Information

Textbooks

Modern Automotive Technology, Duffy, 8th edition,  ISBN#-978-1-6190-370-7

Modern Automotive Technology Shop Manual, Johanson, ISBN#- 978-1-61960-377-6

Supplies

Tools from ELPT 1311, MCHN 1343, and INMT 1305 are required

Safety Glasses or Goggles

Non-slip work boots or shoes

1/4", 3/8", 1/2” socket set with drive.

Student Performance

End-of-Course Outcomes: Utilize appropriate safety procedures; describe historical development and career information of the automotive industry; demonstrate safe, professional, and responsible work practices; demonstrate the proper use of shop equipment and tools; describe the eight Automotive Service Excellence (ASE) vehicle subsystems; use service information; and perform basic automotive maintenance.

1. Identify general shop safety rules and procedures.

  • 5 mph speed limit
  • No more than 10 cars in the shop at one time
  • Put creepers away so that others do not trip over them
  • The overhead doors turn the heat off when open

2. Utilize safe procedures for handling of tools and equipment.

  • Block the wheels on rolling benches
  • Safely operate chain hoists and cherry pickers
  • Brake drum lathes
  • Tire balancer
  • Tire changer
  • Properly handle used oil and be aware of storage containers
  • Properly use hot water parts washer
  • Maintain mops and mop buckets
  • Properly use bench grinders and wear PPE

3. Identify and use proper placement of floor jacks and jack stands.

  • Choose the right jack for the right job, 10 ton jack for trucks, 2 ton jack for cars
  • Store jack stands in proper location
  • Safely use transmission jacks

4. Identify and use proper procedures for safe lift operation.

  • Safety precautions for the 30,000 lb. lift, this one has air operated safety locks
  • Safety precautions for the alignment lift
  • Safety precautions for all lifts

5. Utilize proper ventilation procedures for working within the lab/shop area.

  • There are two ventilation systems in the shop, learn how to use each one and remember to turn them off

There are several ventilation systems in the Collision bay, learn how to use them properly

6. Identify marked safety areas.

7. Identify the location and the types of fire extinguishers and other fire safety equipment; demonstrate knowledge of the procedures for using fire extinguishers and other fire safety equipment.

8. Identify the location and use of eye wash stations.

9. Identify the location of the posted evacuation routes.

10.Comply with the required use of safety glasses, ear protection, gloves, and shoes during lab/shop activities.

11.Identify and wear appropriate clothing for lab/shop activities

Students Rights and Responsibilities

Student Rights and Responsibilities

Log in using the AC Connect Portal

In order to receive your AC Connect Email, you must log in through AC Connect at https://acconnect.actx.edu .

If you are an active staff or faculty member according to Human Resources, use "Exchange". All other students, use "AC Connect (Google) Email".

Expected Student Behavior

No cell phones are to be in use during class unless requested by Instructor. Students will be respectful of other classes being conducted in the building, respectful of their peers, and of the instructor.

Grading Criteria

 Each class day there will be a sign in sheet. Your final grade will be calculated on an average of your attendance, your participation in lab work, and an average of homework and quiz scores.

Classwork- 25%-homework, quizzes, etc

Attendance 25%- Being tardy will automatically count off 25 points on your attendance grade for the day, leaving early will result in a zero for the day.

Lab- 50%- Active participation in lab activities is a major part of your grade, you must be dressed appropriately to work safely on vehicles. Your willingness to work with others and maintaining a positive attitude is part of your Lab grade.

90-100=A

80-89=B

70-79=C

60-69=D

below 60=F

Attendance

  • There are 32 days of class in this course. Each class day there will be a sign in sheet. Your final grade will be calculated on an average of your attendance, your participation in lab work, and an average of homework and quiz scores.

Class 25%-homework, quizzes, late work will have points deducted

Attendance 25%- Being tardy will automatically count off 25 points on your attendance grade for the day, leaving early will result in a zero for the day.

Lab- 50%- Active participation in lab activities is a major part of your grade, you must be dressed appropriately to work safely on vehicles. Your willingness to work with others and maintaining a positive attitude is part of your Lab grade.

 

 

Calendar

Daily activities listed in this section are subject to change due to weather conditions and instructor discretion.

Day one and two– Orientation - introductions

Day 3,4 - Chapter 1- Introduction to automotive technology:

The Automobile.

Objectives : 

  1. Describe the major the purpose of fundamental automotive systems.
  2. Explain the interaction of automotive systems.
  3. Describe the automobile design variations.  –

 

Day 5,6,7 – Chapter 2 – automotive careers and certifications:

Objectives:

  1. List the most common types of automotive careers.
  2. Describe the skill needed to be an automotive technician.

Test Chapter 1

 

Day 8,9,10 – Chapter 3 – Basic hand tools.

Objectives:

  1. Identify common automotive hand tools.
  2. List safety rules for hand tools.
  3. Select the right tool for a given job.
  4. Maintain and store tools properly. 

Test Chapter 2

 

Day 11,12,13 - Chapter 4 – Power tools and Equipment.

Objectives:

  1. Describe the use of power tools and equipment
  2. Explain safety rules as they pertain to power tools.
  3. Explain advantages of one tool over another.

Chapter 5 - The auto shop and safety.

  1. Describe the typical layout of a shop.
  2. Identify types of accidents and ways to avoid them.
  3. Describe general safety rules.

 Test Chapter 3- 4

 

Day 14,15,16 - Chapter 6 – Automotive measuring and math.

  1. Identify basic measuring tools.
  2. Describe basic use of measuring tools.
  3. Use conversion charts.
  4. Understand standard and metric system.

Test Chapter 5

 

 Day 17,18,19 - – Chapter 7 - Service information and work orders. 

  1. Describe the different types of service manuals.
  2. Find and correctly use service manuals.
  3. Explain different types of troubleshooting charts.

Test chapter 6

 

Day 20,21,22 - Chapter 8 – Basic electricity and electronics.

  1. Explain principals of electricity.
  2. Compare voltage current resistance.
  3. Describe basic electrical terms.
  4. Understand basic electronic systems in vehicles.

Test chapter 7

 

 

Day 23,24,25 – Chapter 9 – Fasteners, gaskets, seals, and sealant.

  1. Identify commonly used automotive fasteners.
  2. Select and use fasteners properly.
  3. Know safety rules associated with gaskets

Chapter 10 – Vehicle maintenance fluid service and recycling.

  1. Understand vehicle maintenance.
  2. Locate fluid leaks.
  3. Perform a grease job.
  4. Inspect general hoses, belts, and other components.

 

Test – Chapter 8 -9 -10

 

 

Last day – finals

 

 

 

 

 

Additional Information

Syllabus Created on:

08/05/16 11:58 AM

Last Edited on:

08/19/16 10:44 AM