Special Topics in Machining/Machine Technology Syllabus for 2017-2018
Return to Syllabus List

Instructor Information

Office Location

Manufacturing Education Center 107J

Office Hours

Course Information

COVID-19 Protocols

Recording Policy

Disability Statement

If you have a disability (learning, mental, physical) that affects your ability to participate effectively and have access to any program or service at Amarillo College please contact Disability Services at (806) 345-5639 . Our offices are located in the Student Service Center office 112. More information may be found at www.actx.edu/disability.
Disability Services facilitates access to all programs and services according to the ADA, Americans with Disabilities Act and Section 504 of the Rehabilitation Act, as well as other federal and state laws.

Amarillo College Web Accessibility Policy Statement

Amarillo College is committed to providing equal access to all programs and services, including all working, learning, and service environments that affect equal access for persons with disabilities. This commitment to provide equal access and opportunity for persons with disabilities is in compliance with federal and state law. Amarillo College also strives to provide Electronic and Information Resources (EIR) that are accessible to all authorized users.

If you find you are unable to access material in an accessible format please contact the Disability Services Office at (806) 345-5639 . This office will work in conjunction with other campus resources to address and accommodate your issue in a timely manner.

Statement for Mental Health and Advocacy & Resource Center:

As a student you may experience a range of issues that can cause barriers to learning, such as strained relationships, increased anxiety, alcohol/drug problems, feeling down, difficulty concentrating and/or lack of motivation. These mental health concerns or stressful events may lead to diminished academic performance or reduce a student's ability to participate in daily activities. Amarillo College offers services to assist you with addressing these and other concerns you may be experiencing. If you or someone you know are suffering from any of the aforementioned conditions, you can learn more about the broad range of confidential mental health services available on campus by calling the AC Counseling Center at 806-371-5900. The AC Counseling Center website is https://www.actx.edu/counseling/ . Also, if you are in need of social services (affordable housing, utilities, transportation, food, clothing, childcare, medical/dental/vision, legal), please call the AC Advocacy & Resource Center at 806-371-5439. The AC Advocacy & Resource Center website is https://www.actx.edu/arc

Amarillo College Tutoring for Success Policy:

Administrative Drop Policy

Students who do not attend class on or prior to the census date will be administratively dropped. Effective Fall, 2016

Student Withdrawal Procedures

Students who wish to withdraw from a course must complete all steps indicated on the Academic Withdrawal Request form by the course withdrawal deadline.

NOTE: Students who are attending Texas institutions of higher education, for the first time fall 2007 and later, may not withdraw from more than six courses during their academic career. This withdrawal limitation does not include dual credit or developmental classes (Senate Bill 1231 Rule 4.10.) For more information on Drop and Withdrawal Policies, please visit the Registrar's Office Web site.

Privacy Statement

The Amarillo College Privacy Policy is found at https://www.actx.edu/-amarillo-college-privacy-notice , and applies to all Amarillo College students.  If you have questions about this privacy statement or you believe that your personal information has been released without your consent, send email to humanresources@actx.edu .

Course

MCHN-1391-002 Special Topics in Machining/Machine Technology

Prerequisites

Prerequisite: Instructor Consent

Course Description

Topics address recently identified current events, skills, knowledge, and/or attitudes and behaviors pertinent to the technology or occupation and relevant to the professional development of the student. This course was designed to be repeated multiple times to improve student proficiency.

Student ResourcesStudent Resources Website

Department Expectations

Occupational License Disclaimer

Notice to Students enrolled in an educational program for preparation of issuance of certain occupational licenses:

Students enrolled in an educational program in preparation for obtaining certain occupational licenses are potentially ineligible for such license if the student has been convicted of an offense. For further information, please contact your advisor, the Legal Clinic, or the faculty member in charge of the educational program that you seek to enroll in. The further information you will receive will include notification to you of your right to request a criminal history evaluation letter from the licensing authority in order to clarify your particular situation.

Hours

(3 sem hrs; 2 lec, 2 lab)

Class Type

On Campus Course

Syllabus Information

Textbooks

BLUEPRINT READING FOR WELDERS

A E BENNETT & LOUIS J SLY

  ISBN 1-4018-6723-5

HANDYMAN~IN~YOUR~POCKET
Young/Glover
Published by Sequoia
ISBN: 1-885071-29-9
 
 

Supplies

LIST AS FURNISHED BY INSTRUCTOR

Student Performance

  

Student performance objectives depend on student's class substitution.

Students Rights and Responsibilities

Student Rights and Responsibilities

Log in using the AC Connect Portal

In order to receive your AC Connect Email, you must log in through AC Connect at https://acconnect.actx.edu .

If you are an active staff or faculty member according to Human Resources, use "Exchange". All other students, use "AC Connect (Google) Email".

Expected Student Behavior

 Textbook,Workbook,Notebook & Class Equipment

Students are required to have the specified textbook and workbook no later than the third class session. Failure to do this will result in the student receiving a five point reduction for the fourth class period and increases by five points each following day.The student is required to take notes during lectures, and to turn in a notebook. These notes need to be on three ring bound note book paper for grading prior to the final exam. Articles, accumulated information, and useful reference material that pertain to relative course topics will be counted towards the notebook grade. Notebook should contain syllabus, handouts, formula sheets, tests, assignments, and task list. All items will be graded from the notebook. Neatness of notebook will be graded.  
 and personal protective equipment which includes ANSI Z87.1 approved safety glasses. Student shall have their own personal hand tools similar to those on the department service tool list. Student shall furnish necessary computer media for information transfer. Student shall furnish required text and Handyman Pocket Handbook.
 
Safety Policy and PPE
Safety is everyone's job,and it starts before you enter the shop area. A machine shop has rotating machinery,high voltage electrical equipment,hot metal,sharp metal and chemicals,all of which can harm or even kill you. That is why the rules described below are needed.
Rule#1. Only Safety glasses' with side shields, that meet or exceed ANSI Z87.1 spec will be allowed.
Rule#2. Only long pants are allowed.
Rule#3. Only short sleeved close fitting Tee-shirts or long sleeved shirts rolled up past the elbow are allowed
Rule#4. No open toed shoes are allowed,students should wear work boots or work shoes.
Rule#5. Hair over shoulder length needs to be secured safely with a hat, cap or hairnet.
Rule#6. No necklaces, bracelets, dangling earrings, rings or watches are to be worn in shop.
Rule#7. No horseplay of any type will be tolerated.
Rule#8. Any vandalism or theft will not be tolerated.
Rule#9. Any student under the influence of drugs or alcohol.
Rule#10.No food or drink in shop.
Failure to comply with rules #1-#6 will result in the following disciplinary actions.
First offense. The student will receive a verbal reprimand from instructor and, be withdrawn from the class for that period receiving no grade for that day.
Second offense. The student will receive a written reprimand from instructor, removed from the class for two class periods reviving no points for either day. Any quizzes or test that occur during those classes cannot be made up and will counted as zero points.
Third offense. The student will be suspended from the class for the remainder of the semester and receive a FAILING grade for that class.
Failure to comply with rules #7-#9 will result in the student being immediately  suspended from the class for the remainder of the semester and receiving a FAILING grade for that class.
 
Tools, Equipment,
Tools and equipment specified for this class and any recommended preliminary class in the Machining Technology Curriculum are to be furnished by the student and be with the student during all lab activities. failure to have tools will result in the student receiving no lab grade for that class period.  All student tools should marked with the students initials for easy identification, these tools should be properly used and cared for, thus allowing for longevity and safety of both the user and the tool.
 
  For all other question the below link will take you to Amarillo College Student Rights and Responsibilities
  http://catalog.actx.edu/content.php?catoid=10&navoid=407

Grading Criteria

Course Evaluations:

Students should complete all performance tasks on time at REQUIRED MASTERY LEVEL. Tasks, projects, and various assignments will be scored based on time; accuracy; neatness; completeness; procedure; skill; detail; motivation and attitude; safety practices; clean up; care of manuals, logbooks, and references; and other grading criteria. No task shall be rated until assignment is complete and correct. Complete shall include condition and cleanliness of equipment; clean up of work areas; tool condition and return of all supplies and materials to their proper location. Correct means that projects meets all print specifications in order to be graded.
 
Final (Overall) Grade Policy:
The final overall grade will be computed by adding the points earned as follows:

 

Final exam

        10% min.

 
 
Attendance/Participation
       40%
 
 
Lab projects, notebooks, homework
       30%
 
 
Exams
        20%
 
 
               
 
 
90% ---- 100% = A
80%----- 90%   =  B
70% ---- 80%   = C
60% ---- 70%    = D
0% ------ 60%    = F

 

Makeup Policy
Students are responsible for getting notes from other students when absent. Lab activities will continue on schedule. Individuals will not receive credit for making up activities and there will not be special lab sessions. Some work can be caught up during regular lab times. Missing lab activities may prevent individuals from completing lab projects.

Homework

Homework is due at the start of the first class of each week, starting at week two and continuing through week 8. No late homework will be accepted.

Final: A comprehensive final will be given.

 

 

 

 

 

Attendance

  

 Attendance in class and lab participation is regarded as a requirement and an obligation for learning. Attendance and participation are graded on the Daily Rubric.

Calendar

 

Individual assignments are based on student capabilities and curriculum requirements depending on topic of study.

 

 

Additional Information

E-mail rules.

1).The student will use only the e-mail address issued to that student by  Amarillo College or course mail in Blackboard when contacting instructor or when participating in a class assigned discussion .

2). When a assignment requires an e-mail it must be your Amarillo College e-mail address any other e-mail address will be discarded without being read or graded.

3). When communicating via e-mail you will correspond in a professional manner. Any e-mail containing language of a rude, obscene, sexually harassing, or threatening manner will immediately be reported to the Dean of Students and campus police.

4). No e-mails will be answered or graded if they are in the form of texting. Use proper spelling and punctuation in all your communication.  As the instructor I will not decipher texting I will discard it.

 

 

Syllabus Created on:

03/26/18 2:09 PM

Last Edited on:

03/26/18 2:52 PM