Monday through Thursday 6:00 PM – 10pm
If you have a disability (learning, mental, physical) that affects your ability to participate effectively and have access to any program or service at Amarillo College please contact Disability Services at (806) 345-5639 . Our offices are located in the Student Service Center office 112. More information may be found at www.actx.edu/disability.
Disability Services facilitates access to all programs and services according to the ADA, Americans with Disabilities Act and Section 504 of the Rehabilitation Act, as well as other federal and state laws.
Amarillo College is committed to providing equal access to all programs and services, including all working, learning, and service environments that affect equal access for persons with disabilities. This commitment to provide equal access and opportunity for persons with disabilities is in compliance with federal and state law. Amarillo College also strives to provide Electronic and Information Resources (EIR) that are accessible to all authorized users.
If you find you are unable to access material in an accessible format please contact the Disability Services Office at (806) 345-5639 . This office will work in conjunction with other campus resources to address and accommodate your issue in a timely manner.
As a student you may experience a range of issues that can cause barriers to learning, such as strained relationships, increased anxiety, alcohol/drug problems, feeling down, difficulty concentrating and/or lack of motivation. These mental health concerns or stressful events may lead to diminished academic performance or reduce a student's ability to participate in daily activities. Amarillo College offers services to assist you with addressing these and other concerns you may be experiencing. If you or someone you know are suffering from any of the aforementioned conditions, you can learn more about the broad range of confidential mental health services available on campus by calling the AC Counseling Center at 806-371-5900. The AC Counseling Center website is https://www.actx.edu/counseling/ . Also, if you are in need of social services (affordable housing, utilities, transportation, food, clothing, childcare, medical/dental/vision, legal), please call the AC Advocacy & Resource Center at 806-371-5439. The AC Advocacy & Resource Center website is https://www.actx.edu/arc
The Tutoring for Success policy applies to any student whose grade or performance in the course falls below a departmentally determined minimum threshold. In either of those cases, the instructor will direct the student to the appropriate tutoring service, which may be faculty-led, discipline-specific, and/or general. Under this policy, the instructor will follow specific departmental guidelines governing the use, duration, and grade component of the tutoring need.
Students who do not attend class on or prior to the census date will be administratively dropped. Effective Fall, 2016
Students who wish to withdraw from a course must complete all steps indicated on the Academic Withdrawal Request form by the course withdrawal deadline.
NOTE: Students who are attending Texas institutions of higher education, for the first time fall 2007 and later, may not withdraw from more than six courses during their academic career. This withdrawal limitation does not include dual credit or developmental classes (Senate Bill 1231 Rule 4.10.) For more information on Drop and Withdrawal Policies, please visit the Registrar's Office Web site.
The Amarillo College Privacy Policy is found at https://www.actx.edu/-amarillo-college-privacy-notice , and applies to all Amarillo College students. If you have questions about this privacy statement or you believe that your personal information has been released without your consent, send email to humanresources@actx.edu .
WLDG-1370-020 Introduction to Arc Welding
Prerequisite: WLDG 1373 - minimum grade of C
This course covers the theory and introduction to arc welding processes. Instruction and practice in overlaying carbon steel with continuous overlapping beads using shielded metal arc welding techniques in all positions. Skill in the welding process and the selection of materials and equipment will be stressed.
Student ResourcesStudent Resources Website
Notice to Students enrolled in an educational program for preparation of issuance of certain occupational licenses:
Students enrolled in an educational program in preparation for obtaining certain occupational licenses are potentially ineligible for such license if the student has been convicted of an offense. For further information, please contact:
Melodie Graves
Justice Involved Advocate
Student Service Center 117
mgraves24@actx.edu
806-371-5995
Make appointment at https://melodiegraves.youcanbook.me
You can also contact the Legal Clinic, or the faculty member in charge of the educational program that you seek to enroll in. The further information you will receive will include notification to you of your right to request a criminal history evaluation letter from the licensing authority in order to clarify your particular situation.
(3 sem hrs; 2 lec, 2 lab)
On Campus Course
Welding Skills (Textbook) 5th Edition ISBN#9780-5269-3084-2;Welding Skills ( Workbook);ISBN#978-0-5269-3085-9; B. J. Moniz;American Technical Publishing
In order to receive your AC Connect Email, you must log in through AC Connect at https://acconnect.actx.edu .
If you are an active staff or faculty member according to Human Resources, use "Exchange". All other students, use "AC Connect (Google) Email".
|
Notebook & Class Equipment Students are recommended to take notes during lectures and should maintain a class notebook containing handouts and reference materials. Students shall furnish personal protective equipment to include safety glasses and have their own personal hand tools similar to those on the department tool list.
Shop Policy Read safety handouts provided, use common sense, maintain safe shop practices, keep your Lab clean, and orderly. Keep all safety shields/guards, and equipment in place at all times. Notify your Instructor of faulty wiring/equipment, worn or damaged tools, or missing parts. No horseplay is allowed whatsoever. Academic disciplinary measures will be promptly administered to offending person(s). Please help the Instructor to maintain order so that he can be free to use your time for more effective teaching, and less time housekeeping. We all can enjoy the benefits of an effective and conducive learning environment. Remember to use your safety glasses when entering the shop area.
Tools, Equipment, and Clothing Students shall wear appropriate clothing to perform any work task assigned. Tools and equipment specified for this class and any preliminary class in the curriculum are to be furnished by the student. Failure to dress for work or bring needed equipment may count as an absence. All tools should be properly used and cared for, thus allowing for longevity and safety of both the user and the tool. All Welding students are expected to follow the Amarillo Technical Education Code of Professional Conduct Amarillo College Technical Education Code of Professional ConductAmarillo College has the responsibility to provide you with the education, training and "hands on" practice to become a professional in your chosen field. The instruction, equipment, facilities and apparatus are provided for your use. Studying, practicing and learning are required by you. As a participating student in Amarillo College Technical Programs, you will be expected to act, perform and train in a professional manner. The following rules and guidelines are to be followed by everyone.
Attendance:Unless it is an emergency, it is highly recommended that you do not miss class. Recovery of missed information will be the responsibility of the student. Class begins at the scheduled time. If you are not in your seat in class or at the designated location during laboratory exercises, you will be counted as tardy. The student will be required to show an acceptable understanding of the topic(s) covered during their absence . Check syllabus for your instructor's policy regarding attendance.
Professional Attire:Every student will be required to wear an approved AC logo shirt to both class and lab. Shirts must be ordered through your advisor during the registration period. It is recommended that each student purchase one shirt for every class in which they are registered. Pants will be:
You are expected to reflect the dignity, pride and respectfulness of an industry professional. As a representative of Amarillo College's Technical Education Program you shall wear your AC logo shirt while in the classroom and on the training field or in the laboratory. There will be no caps, hats, bandanas, beanies, or hoods allowed to be worn in the classroom. Lab attire will be determined by your instructor. Please check your syllabus. Your Personal Protective Equipment (PPE) shall be worn when indicated by the instructor in charge during any training, field, or laboratory exercises. It is your responsibility to keep your equipment clean and in good shape.
Required professional attire is mandatory for class and laboratory participation .
Tools I Equipment I Books I Supplies I PPE: You must show up to class with the required list of tools/equipment/books/supplies/PPE listed on your syllabus in order to be allowed to participate and earn credit for the day.
Conduct:Due to the importance of maintaining a safe atmosphere in the training field/laboratory environment as well as in the classroom, any disruptive behavior will not be tolerated . All students are expected to be respectful, courteous, attentive and quiet in order to support the learning environment. There shall be no smoking except in designated areas and during designated breaks. Students shall refrain from the use of abusive or slanderous language. There is to be no horseplay, fighting, harassment or misconduct by anyone . Any student who uses, has in their possession, or is under the influence of illegal drugs or alcohol on campus or at the training field will immediately be turned over to the campus police for appropriate action. This will be a ZERO tolerance policy with immediate steps taken toward withdrawal from Amarillo College . Anyone who is caught cheating on an exam or quiz will immediately be excused from class and not allowed to return. This is an Amarillo College rule and will be strictly enforced. This applies to plagiarism as well.
Electronic Devices:All electronic devices which produce audible sounds must be silenced during class and on the laboratory/training field. All visual slides and materials are the property of the instructor and may be copyright protected, hence no photocopy is allowed. See the syllabus for your instructor's policy on this matter.
Grievances:Any student who feels that there is a conflict with a course instructor should first make every effort to resolve that matter with the instructor. If you are unable to resolve differences then you should seek resolution from the immediate supervisor of the instructor or the course coordinator.
NOTE: Compliance with the Amarillo College Technical Education Code of Professional Conduct is mandatory for class participation.Stealing, vandalism, or pilferage will be dealt with severely!! No drugs, tobacco, drinks, or food allowed!
All students are expected to follow the Amarillo College Students Code of Conduct. Any violation of this Code will be dealt with appropriately.
|
Students should complete all projects and performance tests at the REQUIRED PROFESSIONAL LEVEL. They will be scored on neatness, completeness, procedure, professionalism, attitude, attendance and punctuality, shop cleanup, and SAFETY PRACTICES.
Daily Attendance/Participation 25%
Lab Projects and Performance 10%
Homework/Written exams/notebooks 20%
Horizontal Fillet Welds(6010-7018) 15%
Vertical Fillet Welds (6010-7018) 15%
Overhead Fillet Welds (6010-7018) 15%
Class Total 100%
90-100%-------A
80-89% -----B
70-79 % -----C
60-69% -----D
<59% --------F
Attendance in class and lab participation is regarded as a requirement and an obligation for learning. Students should be in attendance and on time for all scheduled classes.
TENTATIVE SCHEDULE Class Meeting 1 08-24-2018
TENTATIVE SCHEDULE Class Meeting 2
TENTATIVE SCHEDULE Class Meeting 3
TENTATIVE SCHEDULE Class Meeting 4
TENTATIVE SCHEDULE Class Meeting 5
TENTATIVE SCHEDULE Class Meeting 6
TENTATIVE SCHEDULE Class Meeting 7
TENTATIVE SCHEDULE Class Meeting 8
TENTATIVE SCHEDULE Class Meeting 9
TENTATIVE SCHEDULE Class Meeting 10
TENTATIVE SCHEDULE Class Meeting 11
TENTATIVE SCHEDULE Class Meeting 12
TENTATIVE SCHEDULE Class Meeting 13
TENTATIVE SCHEDULE Class Meeting 14
TENTATIVE SCHEDULE Class Meeting 15
TENTATIVE SCHEDULE Class Meeting 16
Shop clean up
10/28/19 2:49 PM
01/19/21 5:45 PM