(806) 345-5642
Durrett Hall D210 A
M/W 11:45- 12:45 F 9:00 - 10:00 or by appointment
If you have a disability (learning, mental, physical) that affects your ability to participate effectively and have access to any program or service at Amarillo College please contact Disability Services at (806) 345-5639 . Our offices are located in the Student Service Center office 112. More information may be found at www.actx.edu/disability.
Disability Services facilitates access to all programs and services according to the ADA, Americans with Disabilities Act and Section 504 of the Rehabilitation Act, as well as other federal and state laws.
Amarillo College is committed to providing equal access to all programs and services, including all working, learning, and service environments that affect equal access for persons with disabilities. This commitment to provide equal access and opportunity for persons with disabilities is in compliance with federal and state law. Amarillo College also strives to provide Electronic and Information Resources (EIR) that are accessible to all authorized users.
If you find you are unable to access material in an accessible format please contact the Disability Services Office at (806) 345-5639 . This office will work in conjunction with other campus resources to address and accommodate your issue in a timely manner.
As a student you may experience a range of issues that can cause barriers to learning, such as strained relationships, increased anxiety, alcohol/drug problems, feeling down, difficulty concentrating and/or lack of motivation. These mental health concerns or stressful events may lead to diminished academic performance or reduce a student's ability to participate in daily activities. Amarillo College offers services to assist you with addressing these and other concerns you may be experiencing. If you or someone you know are suffering from any of the aforementioned conditions, you can learn more about the broad range of confidential mental health services available on campus by calling the AC Counseling Center at 806-371-5900. The AC Counseling Center website is https://www.actx.edu/counseling/ . Also, if you are in need of social services (affordable housing, utilities, transportation, food, clothing, childcare, medical/dental/vision, legal), please call the AC Advocacy & Resource Center at 806-371-5439. The AC Advocacy & Resource Center website is https://www.actx.edu/arc
The Tutoring for Success policy applies to any student whose grade or performance in the course falls below a departmentally determined minimum threshold. In either of those cases, the instructor will direct the student to the appropriate tutoring service, which may be faculty-led, discipline-specific, and/or general. Under this policy, the instructor will follow specific departmental guidelines governing the use, duration, and grade component of the tutoring need.
Students who do not attend class on or prior to the census date will be administratively dropped. Effective Fall, 2016
Students who wish to withdraw from a course must complete all steps indicated on the Academic Withdrawal Request form by the course withdrawal deadline.
NOTE: Students who are attending Texas institutions of higher education, for the first time fall 2007 and later, may not withdraw from more than six courses during their academic career. This withdrawal limitation does not include dual credit or developmental classes (Senate Bill 1231 Rule 4.10.) For more information on Drop and Withdrawal Policies, please visit the Registrar's Office Web site.
The Amarillo College Privacy Policy is found at https://www.actx.edu/-amarillo-college-privacy-notice , and applies to all Amarillo College students. If you have questions about this privacy statement or you believe that your personal information has been released without your consent, send email to humanresources@actx.edu .
ENGR-2302-001 Engineering Mechanics II (Dynamics)
Prerequisites: ENGR 2301-minimum grade of C
Basic theory of engineering mechanics, using calculus, involving the motion of particles, rigid bodies and systems of particles; Newton's Laws; work and energy relationships; principles of impulse and momentum; application of kinetics and kinematics to the solution of engineering problems.
Student ResourcesStudent Resources Website
Notice to Students enrolled in an educational program for preparation of issuance of certain occupational licenses:
Students enrolled in an educational program in preparation for obtaining certain occupational licenses are potentially ineligible for such license if the student has been convicted of an offense. For further information, please contact:
Melodie Graves
Justice Involved Advocate
Student Service Center 117
mgraves24@actx.edu
806-371-5995
Make appointment at https://melodiegraves.youcanbook.me
You can also contact the Legal Clinic, or the faculty member in charge of the educational program that you seek to enroll in. The further information you will receive will include notification to you of your right to request a criminal history evaluation letter from the licensing authority in order to clarify your particular situation.
(3 sem hrs; 3 lec)
On Campus Course
TEXTBOOK:
Engineering Mechanics. Statics and Dynamics, 14th edition.
AUTHORS:
R. C. Hibbeler, Prentice Hall Publishing Company.
After completing this course, the student will be able to demonstrate knowledge of the following topics with 70% accuracy as evaluated by the engineering faculty:
In order to receive your AC Connect Email, you must log in through AC Connect at https://acconnect.actx.edu .
If you are an active staff or faculty member according to Human Resources, use "Exchange". All other students, use "AC Connect (Google) Email".
Students are expected to behave in the classroom in a manner that is supportive of the learning environment. Behaviors that are not supportive include, but are not limited to: tardiness/leaving early; electronic device noises; texting or using electronic devices in non-course related activities during lecture; talking during the lecture; abusive, offensive, and/or disrespectful language or demeanor toward AC faculty, staff, students, and/or Amarillo College property.
In order to receive credit for a course, all material listed on the syllabus must be covered. The instructor sets the pace to ensure that these requirements are met. Complaining about the pace will not result in less material being covered.
Students who fail to comply with the standards outlined in the syllabus and/or AC’s Student Rights & Responsibilities document will be subject to disciplinary action which may include, but is not limited to: removal from the classroom; consultation with the Math & Engineering Department Chair and/or other AC authority; withdrawal from the course and/or Amarillo College.
The final grades of A (90-100), B (80-89), C (70-79), D (60-69), and F (below 60) will be computed as the average of the earned grades as follows:
Homework and Class Quizzes 10%
Learning Activities 10%
Major Exams 45% (15% each)
Project 20%
Final Exam 15%
Absence from an exam will incur a zero unless there is prior notification of the instructor with approval granted or there is an emergency that could not be circumvented. Students who miss an exam because of College or business related activities should notify the instructor before the absence occurs. Make-up exams will be given only under rare, extenuating circumstances and at the discretion of the instructor (after written petition for consideration).
The project counts the same as a major exam. It will be completed as a group/class project and includes a proposal and written report. In view of the Corona Virus pandemic a substitue activity may be found.
As an engineer, you will need to continue lifelong learning throughout your career. You will attend workshops, tour work sites, interview clients, among other duties. To support the goal of lifelong learning outside of the classroom, ACES (Amarillo College Enginering Society) will arrange for guest speakers and/or tours to broaden your education. You must attend 4 of the activities or society fundraisers. We are planning on a minimum of 6 activities from which to chose. If you cannot attend the activity, you will submit a 2 page, double spaced, 12 point paper (including footnotes) on an assigned engineering topic.
Homework shall be presented on engineering (quadrille) paper, in pencil, one side only. If an error is made, erase thoroughly. Homework with scratched out work will NOT be accepted. Each problem should be started on a new page. Homework presentations shall be as follows:
*NOTE:If I can’t read it, I won’t grade it.
Homework sets shall be stapled upper left and then folded in half along a line perpendicular to the long dimension. The student’s name, course and section number (ENGR 2302-001), date, and the problems included shall be placed on the outside sheet with the fold to the left, the holes toward the bottom, roughly centered on that side.
Janie Smith
ENGR 2302-001
1/11/16
12-4, 6, 9
Grades will be awarded based on the following formula:
HW mark = (presentation factor) x (correctness)
Here the presentation factor is a number between 0 and 1. This means that homework should be both correct (or mostly correct) and well presented to receive a high mark. Be advised that if the quality of presentation is very poor, then the submission may not be marked for correctness. But don't get out your word processor. Neat and legible handwriting, preferably printing, and adherence to the above guidelines is all that is required.
Solutions to assigned problems will be posted soon after the problems are due to be handed in.
Grading of Tests: In complex problem analyses, such as those used in this course, there are many opportunities for errors. Thus exams will be graded using "partial credit" as it is recognized that some sections of an individual problem may have been carried out correctly even though the final answer may be incorrect. Partial credit will only be given if the student work is logically developed, with clear and well marked diagrams, with the appropriate fundamental and auxiliary equations prominently displayed, where the substitutions into the equations are quite clear, and the assumptions used are quite obvious to the grader when grading. That is, it is the student's responsibility to present his/her work so clearly that the grader can quickly ascertain the location and nature of the error(s) and can easily follow the subsequent work through to the now incorrect solution of the problem. Thus, the student's contribution, needed to obtain partial credit, is to be able to clearly lead the grader through the student's thought process on the exam page alone. If this is not quite clear on the work submitted, credit will not be given then nor later. Partial credit is simply not negotiable.
You must attend to be allowed the opportunity to take the pop tests and hear the lecture and homework assignments as described below.
Expect to have homework assigned each day. Please note the homework format requirements. You are responsible for the requirements. A number of in-class quizzes may be given during lecture periods. These will count as extra homework. Homework and in-class exam grades will comprise 15% of the course grade.
Please remember the deadline for dropping a class at Amarillo College during the Spring semester is November 24, 2020. If you stop attending class and do not officially drop the course by this deadline, and your average is below a 60, you will receive an F for the course.
Attendance is essential for successful completion of this course. In order to promote consistent attendance, homework is regularly assigned and in-class quizzes may periodically be given. Late homework is not accepted and in-class quizzes may not be made up. Homework may be submitted and exams taken in advance when absences are due to a scheduled event.
| Projected Schedule Subject to Change | |||
|---|---|---|---|
| Week 1 | Syllabus, 12.1 | Week 9 | 15.5-15.7 |
| Week 2 | 12.2 - 12.6 | Week 10 | 16.1 - 16.3, Test |
| Week 3 | 12.7 - 12.10 | Week 11 | 16.5 - 16.8 |
| Week 4 | 13.1- 13.4 | Week 12 | 17.1 - 17.4 |
| Week 5 | 13.5 - 13.6 | Week 13 | 17.5 |
| Week 6 | 14.1 - 14.3, Test | Week 14 | 18.1 - 18.4, Test |
| Week 7 | 14.4 - 14.6 | Week 15 | 19.1 - 19.3 |
| Week 8 | 15.1 - 15.4 | Week 16 | Final |
None
None
None
08/18/20 2:39 PM
10/23/20 3:44 PM