If you have a disability (learning, mental, physical) that affects your ability to participate effectively and have access to any program or service at Amarillo College please contact Disability Services at (806) 345-5639 . Our offices are located in the Student Service Center office 112. More information may be found at www.actx.edu/disability.
Disability Services facilitates access to all programs and services according to the ADA, Americans with Disabilities Act and Section 504 of the Rehabilitation Act, as well as other federal and state laws.
Amarillo College is committed to providing equal access to all programs and services, including all working, learning, and service environments that affect equal access for persons with disabilities. This commitment to provide equal access and opportunity for persons with disabilities is in compliance with federal and state law. Amarillo College also strives to provide Electronic and Information Resources (EIR) that are accessible to all authorized users.
If you find you are unable to access material in an accessible format please contact the Disability Services Office at (806) 345-5639 . This office will work in conjunction with other campus resources to address and accommodate your issue in a timely manner.
As a student you may experience a range of issues that can cause barriers to learning, such as strained relationships, increased anxiety, alcohol/drug problems, feeling down, difficulty concentrating and/or lack of motivation. These mental health concerns or stressful events may lead to diminished academic performance or reduce a student's ability to participate in daily activities. Amarillo College offers services to assist you with addressing these and other concerns you may be experiencing. If you or someone you know are suffering from any of the aforementioned conditions, you can learn more about the broad range of confidential mental health services available on campus by calling the AC Counseling Center at 806-371-5900. The AC Counseling Center website is https://www.actx.edu/counseling/ . Also, if you are in need of social services (affordable housing, utilities, transportation, food, clothing, childcare, medical/dental/vision, legal), please call the AC Advocacy & Resource Center at 806-371-5439. The AC Advocacy & Resource Center website is https://www.actx.edu/arc
The Tutoring for Success policy applies to any student whose grade or performance in the course falls below a departmentally determined minimum threshold. In either of those cases, the instructor will direct the student to the appropriate tutoring service, which may be faculty-led, discipline-specific, and/or general. Under this policy, the instructor will follow specific departmental guidelines governing the use, duration, and grade component of the tutoring need.
Students who do not attend class on or prior to the census date will be administratively dropped. Effective Fall, 2016
Students who wish to withdraw from a course must complete all steps indicated on the Academic Withdrawal Request form by the course withdrawal deadline.
NOTE: Students who are attending Texas institutions of higher education, for the first time fall 2007 and later, may not withdraw from more than six courses during their academic career. This withdrawal limitation does not include dual credit or developmental classes (Senate Bill 1231 Rule 4.10.) For more information on Drop and Withdrawal Policies, please visit the Registrar's Office Web site.
The Amarillo College Privacy Policy is found at https://www.actx.edu/-amarillo-college-privacy-notice , and applies to all Amarillo College students. If you have questions about this privacy statement or you believe that your personal information has been released without your consent, send email to humanresources@actx.edu .
MCHN-1332-DC001 Bench Work and Layout
Coerequisite: INMT 1305 with minimum grade of C
An introduction to bench work and layout. Application of the use and theory of tools such as hand tools, height gages, pedestal grinders and layout tools.
Student ResourcesStudent Resources Website
Notice to Students enrolled in an educational program for preparation of issuance of certain occupational licenses:
Students enrolled in an educational program in preparation for obtaining certain occupational licenses are potentially ineligible for such license if the student has been convicted of an offense. For further information, please contact:
Melodie Graves
Justice Involved Advocate
Student Service Center 117
mgraves24@actx.edu
806-371-5995
Make appointment at https://melodiegraves.youcanbook.me
You can also contact the Legal Clinic, or the faculty member in charge of the educational program that you seek to enroll in. The further information you will receive will include notification to you of your right to request a criminal history evaluation letter from the licensing authority in order to clarify your particular situation.
(3 sem hrs; 2 lec, 2 lab)
On Campus Course
HANDYMAN~IN~YOUR~POCKET
Young/Glover
Published by Sequoia
ISBN: 1-885071-29-9
PRECISION MACHINING TECHNOLOGY, 2nd Ed.
Hoffman/Hopewell/Janes
Published by Delmar/Cengage
ISBN: 13:978-1-2854-4454-3 or 10:12854-4454-X
Technical Shop Mathematics 3rd Edition.
Thomas Achatz.
Published by Industrial Press.
ISBN 0-8311-3086-5
Machinery's Handbook 30th Edition.
Published by Industrial Press.
ISBN 97808311916.
An introduction to bench work and layout. Application of the use and theory of tools such as hand tools, height gages, pedestal grinders, and layout tools.
End-of-Course Outcomes: Identify layout and hand tools; describe the proper use of layout and hand tools; list the safety procedures in operating a pedestal grinder; demonstrate proper use of layout tools using precision and semi-precision procedures; adjust clearances on the tool rest and the spark arrestor on the pedestal grinder; perform grinding procedures on twist drills and tool blanks; and perform grinding wheel replacement.
In order to receive your AC Connect Email, you must log in through AC Connect at https://acconnect.actx.edu .
If you are an active staff or faculty member according to Human Resources, use "Exchange". All other students, use "AC Connect (Google) Email".
Textbook,Workbook,Notebook & Class Equipment
Course Evaluations:
Students should complete all performance tasks on time at REQUIRED MASTERY LEVEL. Tasks, projects, and various assignments will be scored based on time; accuracy; neatness; completeness; procedure; skill; detail; motivation and attitude; safety practices; clean up; care of manuals, logbooks, and references; and other grading criteria. No task shall be rated until assignment is complete and correct. Complete shall include condition and cleanliness of equipment; clean up of work areas; tool condition and return of all supplies and materials to their proper location. Correct means that projects meets all print specifications in order to be graded.
Homework : Textbook,Math, Geometric Construction, Shop Test Projects and Final
Textbook Reading: Required readings are to be completed prior to class, this will help you be prepared for class discussion. Text questions will be turned in the first class of the following week. The question need not be written out only the answer. All answer are to be neat and legible. I will determine what is neat and legiable.
Textbook Section Questions: Assigned questions are due no later than the beginning of the first class of the next week. This will allow you a weekend to complete your assignment. You need not write out the question, just the answers in a neat and legible manner. I will determine what is neat and legible. NO LATE HOMEWORK WILL BE ACCEPTED.
Math and Geometric Construction Homework: Problems are due no later than the beginning of the first class of the next week. NO LATE HOMEWORK WILL BE ACCEPTED.
Shop Test: One Shop Test per week this test will be over all theory and math this is a comprehensive test. If the student is absent there are no makeup exams.
Projects: A minimum of four projects will be graded. Projects will be graded for accuracy and other items explained on the project rubric. Once a project has been turned in to instructor it will be graded.
Final Exam: A comprehensive final exam will be administered. Failure to take the final exam will result in the student receiving a failing grade for the class.
Tools: Students are required to have tools of their own as specified on syllabus failure to have the required tools
The professional industrial worker understands the importance of being on time and having all the required tools, books and other materials as needed to successfully complete the job, this professional also under stands the need to follow rules and regulations as laid out by the employer, government regulatory agencies and insurance companies .That is why the rules listed below are given.
All Class dates are Tentative.
Class 1 Review Syllabus.
Week 1 Math Fractions and Decimals / Shop Theory
Week 1 Print Reading
Week 1 Measuring Tools / Machine Operations
Week 1 Shop Test
Week 2 Math Fractions and Decimals / Shop Theory
Week 2 Print Reading
Week 2 Measuring Tools / Machine Operations
Week 2 Lab Drill Sharpening / Bandsaw Blade Welding
Week 2 Shop Test
Week 3 Math Fractions and Decimals / Shop Theory
Week 3 Print Reading
Week 3 Measuring Tools / Machine Operations
Week 3 Lab Work on Projects
Week 3 Shop Test
Week 4 Math Geometery / Shop Theory
Week 4 Print Reading
Week 4 Measuring Tools / Machine Operations
Week 4 Lab Work on Projects
Week 4 Shop Test
Week 5 Math Geometery / Shop Theory
Week 5 Print Reading
Week 5 Measuring Tools / Machine Operations
Week 5 Lab Work on Projects
Week 5 Shop Test
Week 6 Math Geometery / Shop Theory
Week 6 Print Reading
Week 6 Measuring Tools / Machine Operations
Week 6 Lab Work on Projects
Week 6 Shop Test
Week 7 Math Geometery / Shop Theory
Week 7 Print Reading
Week 7 Measuring Tools / Machine Operations
Week 7 Lab Work on Projects
Week 7 Shop Test
Week 8 Math Geometry / Shop Theory
Week 8 Print Reading / GD&T
Week 8 Measuring Tools / Machine Operations
Week 8 Lab Work on Projects
Week 8 Shop Test
Week 9 Math Geometry / Work on Projects
Week 9 Print Reading GD&T
Week 9 Measuring Tools Machine Operations
Week 9 Lab Work on Projects
Week 9 Shop Test
Week 10 Math Geometry / Shop Theory
Week 10 Print Reading GD&T
Week 10 Measuring Tools / Machine Operations
Week 10 Lab Work on Projects
Week 10 Shop Test
Week 11 Math Geometry / Shop Theory
Week 11 Print Reading GD&T
Week 11 Measuring Tools / Machine Operations
Week 11 Lab Work on Projects
Week 11 Shop Test
Week 12 Math Geometry / Shop Theory
Week 12 Print Reading GD&T
Week 12 Measuring Tools / Machine Operations
Week 12 Lab Work on Projects
Week 12 Shop Test
Week 13 Math Geometry / Shop Theory
Week 13 Print Reading GD&T
Week 13 Measuring Tools / Machine Operations
Week 13 Lab Work on Projects
Week 13 Shop Test
Week 14 Math Geometry / Shop Theory
Week 14 Print Reading GD&T
Week 14 Measuring Tools / Machine Operations
Week 14 Lab Work on Projects
Week 14 Shop Test
Week 15 Math Geometry / Shop Theory
Week 15 Print Reading GD&T
Week 15 Measuring Tools / Machine Operations
Week 15 Lab Work on Projects
Week 15 Shop Test
Week 16 Math Geometry / Shop Theory
Week 16 Print Reading GD&T
Week 16 Measuring Tools / Machine Operations
Week 16 Lab Work on Projects
Week 16 Final
E-mail rules.
1).The student will use only the e-mail address issued to that student by Amarillo College when contacting instructor or when participating in a class assigned discussion .
2). When a assignment requires an e-mail it must be your Amarillo College e-mail address any other e-mail address will be discarded without being read or graded.
3). When communicating via e-mail you will correspond in a professional manner. Any e-mail containing language of a rude, obscene, sexually harassing, or threatening manner will immediately be reported to the Dean of Students and campus police.
4). No e-mails will be answered or graded if they are in the form of texting. Use proper spelling and punctuation in all your communication. As the instructor I will not decipher texting I will discard it.
08/23/21 2:02 PM
08/23/21 2:02 PM