Monday through Thursday 6:00 PM – 10pm
If you have a disability (learning, mental, physical) that affects your ability to participate effectively and have access to any program or service at Amarillo College please contact Disability Services at (806) 345-5639 . Our offices are located in the Student Service Center office 112. More information may be found at www.actx.edu/disability.
Disability Services facilitates access to all programs and services according to the ADA, Americans with Disabilities Act and Section 504 of the Rehabilitation Act, as well as other federal and state laws.
Amarillo College is committed to providing equal access to all programs and services, including all working, learning, and service environments that affect equal access for persons with disabilities. This commitment to provide equal access and opportunity for persons with disabilities is in compliance with federal and state law. Amarillo College also strives to provide Electronic and Information Resources (EIR) that are accessible to all authorized users.
If you find you are unable to access material in an accessible format please contact the Disability Services Office at (806) 345-5639 . This office will work in conjunction with other campus resources to address and accommodate your issue in a timely manner.
As a student you may experience a range of issues that can cause barriers to learning, such as strained relationships, increased anxiety, alcohol/drug problems, feeling down, difficulty concentrating and/or lack of motivation. These mental health concerns or stressful events may lead to diminished academic performance or reduce a student's ability to participate in daily activities. Amarillo College offers services to assist you with addressing these and other concerns you may be experiencing. If you or someone you know are suffering from any of the aforementioned conditions, you can learn more about the broad range of confidential mental health services available on campus by calling the AC Counseling Center at 806-371-5900. The AC Counseling Center website is https://www.actx.edu/counseling/ . Also, if you are in need of social services (affordable housing, utilities, transportation, food, clothing, childcare, medical/dental/vision, legal), please call the AC Advocacy & Resource Center at 806-371-5439. The AC Advocacy & Resource Center website is https://www.actx.edu/arc
The Tutoring for Success policy applies to any student whose grade or performance in the course falls below a departmentally determined minimum threshold. In either of those cases, the instructor will direct the student to the appropriate tutoring service, which may be faculty-led, discipline-specific, and/or general. Under this policy, the instructor will follow specific departmental guidelines governing the use, duration, and grade component of the tutoring need.
Students who do not attend class on or prior to the census date will be administratively dropped. Effective Fall, 2016
Students who wish to withdraw from a course must complete all steps indicated on the Academic Withdrawal Request form by the course withdrawal deadline.
NOTE: Students who are attending Texas institutions of higher education, for the first time fall 2007 and later, may not withdraw from more than six courses during their academic career. This withdrawal limitation does not include dual credit or developmental classes (Senate Bill 1231 Rule 4.10.) For more information on Drop and Withdrawal Policies, please visit the Registrar's Office Web site.
The Amarillo College Privacy Policy is found at https://www.actx.edu/-amarillo-college-privacy-notice , and applies to all Amarillo College students. If you have questions about this privacy statement or you believe that your personal information has been released without your consent, send email to humanresources@actx.edu .
WLDG-1373-020 Thermal Cutting I
Prerequisite: INMT 1305 - minimum grade of C
Instruction and practice of equipment inspection, maintenance, repair and set up for manual and mechanized oxyfuel gas cutting (OFC). Instruction and practice in production cuts on carbon steel using manual and mechanical oxyfuel systems. Instruction and practice soldering and brazing carbon steel, stainless steel and copper using oxyfuel equipment. Practice and production of assembly cuts to be examined and tested according to Section 8 AWS SENSE QC10.
Student ResourcesStudent Resources Website
Notice to Students enrolled in an educational program for preparation of issuance of certain occupational licenses:
Students enrolled in an educational program in preparation for obtaining certain occupational licenses are potentially ineligible for such license if the student has been convicted of an offense. For further information, please contact:
Melodie Graves
Justice Involved Advocate
Student Service Center 117
mgraves24@actx.edu
806-371-5995
Make appointment at https://melodiegraves.youcanbook.me
You can also contact the Legal Clinic, or the faculty member in charge of the educational program that you seek to enroll in. The further information you will receive will include notification to you of your right to request a criminal history evaluation letter from the licensing authority in order to clarify your particular situation.
(3 sem hrs; 2 lec, 2 lab)
On Campus Course
SUPPLIES
PPE
Quantity----Item
--AC logo long sleeve shirt
--Jeans, wool pants, coveralls or overalls
(no rips or frays)
--Plain cotton t-shirts
(no designs/imprints or v neck/low cut shirts)
--Leather Boots
(steel toed preferred)
(1)--Welding cap
(1)--Heavy duty welding Gloves
(1)--Light leather work Gloves
(1)--Leather welding Jacket
(1)--Safety glasses
(1)--Welding Helmet w/ #9 & #10 lens
(or auto darkening lens)
(8)--Clear cover plates for welding helmet
(1)--Tinted Oxyfuel safety glasses (shade #5)
(1)--Heat shield hand pad
(1)--Grinding face shield
TOOLS
Quantity----Item
(1)---Large tool bag or box
(1)--12oz Ball peen hammer
(4)--4” C-clamps
(1)—Wrenches in sizes 3/4” and 11/8”
(1)--Locking pliers
(1)--Slip joint pliers
(1)--Soap stone set
(1)--Metal paint marker
(2)--Combination padlock
(1)--Pipe wrap-around
(1)--12” Combination square (metal straight edge)
(1)--Small flashlight
(1)--Striker and matching flints
(1)--Tape measure (16’ or larger)
(1)--Torch tip cleaner
(1)--Oxyfuel torch set
Oxyfuel torch body
Oxyfuel torch cutting head
Oxyfuel cutting tip size #0 and #00
Oxyfuel welding tip size #0 and #1
Gentec Inline Quick Connectors
(1)--Chipping hammer
(1)--Wire Brush
(1)--4.5” Angle Grinder
(20)--4.5” Grinder Hard rock disks (thick)
(20)--4.5” Grinder flap disks 36 grit
(3)--4.5” Grinder hard rock pipeliner disks (thin)
(4)--4.5” Grinder wire wheel
(1)---Three Ring heavy duty binder 3”
(1)--8.5”x11” College ruled paper
(1)--Graph paper (4 square/inch)
(1)--Three ring dividers
Consumable Metal Supplies
10 gage 4”x2” (100)
14 gage 4”x2” (100)
3/8”x7” flat plate (10)
3” SCH 40 pipe 21” (1)
Instruction and practice of equipment inspection, maintenance, repair, and set up for manual and mechanized oxyfuel gas cutting (OFC). Instruction and practice in production cuts on carbon steel using manual and mechanical oxyfuel systems. Practice and production of assembly cuts to be examined and tested according to Section 8 AWS SENSE QC10.
In order to receive your AC Connect Email, you must log in through AC Connect at https://acconnect.actx.edu .
If you are an active staff or faculty member according to Human Resources, use "Exchange". All other students, use "AC Connect (Google) Email".
Notebook & Class Equipment
Students are recommended to take notes during lectures and should maintain a class notebook containing handouts and reference materials. Students shall furnish personal protective equipment to include safety glasses and have their own personal hand tools similar to those on the department tool list. Students shall bring paper and pen or pencil to each class meeting.
Shop Policy
Read safety handouts provided, use common sense, maintain safe shop practices, keep your Lab clean, and orderly. Keep all safety shields/guards, and equipment in place at all times. Notify your Instructor of faulty wiring/equipment, worn or damaged tools, or missing parts. No horseplay is allowed whatsoever. Academic disciplinary measures will be promptly administered to offending person(s). Please help the Instructor to maintain order so that he can be free to use your time for more effective teaching, and less time housekeeping. We all can enjoy the benefits of an effective and conducive learning environment. Remember to use your safety glasses when entering the shop area.
Tools, Equipment, and Clothing
Students shall wear appropriate clothing to perform any work task assigned. Students at all times must wear an approved shirt with the Amarillo College logo during class meetings. Failure to wear approved shirt will result in an absence for the entire meeting. Tools and equipment specified for this class and any preliminary class in the curriculum are to be furnished by the student. Failure to dress for work or bring needed equipment will count as an absence. All tools should be properly used and cared for, thus allowing for longevity and safety of both the user and the tool.
Stealing, vandalism, or pilferage will be dealt with severely!! No drugs, tobacco, drinks, or food allowed!
All students are expected to follow the Amarillo College Students Code of Conduct. Any violation of this Code will be dealt with appropriately.
Students should complete all projects and performance Tests at the REQUIRED PROFESSIONAL LEVEL. They will be scored on neatness, completeness, procedure, professionalism, attitude, attendance, punctuality, shop cleanup, and SAFETY PRACTICES.
The final overall grade will be determined as follows:
Attendance/Participation----20% of grade----16 sessions------------1600 pts. possible
Projects/Performance -------50% of grade----15 projects-------------1500 pts. possible
Homework/Notebook--------10% of grade----6 Homework items-----600 pts. possible
Midterm and Final-------------20% of grade---------------------------------200 pts possible
TOTAL 3600 pts. possible
PROJECTS
Straight edge torch cut 100 pts. possible
Beveled edge torch cut 100 pts. possible
Shapes torch cut 100 pts. possible
Torch cut combination plate (straight, beveled, shape) 100 pts. possible
3" pipe straight cut 100 pts. possible
3" pipe beveled cut 100 pts. possible
Butt weld 100 pts. possible
Lap weld 100 pts. possible
T-weld 100 pts. possible
Combination plate welds in 2G, 3G positions 100 pts. possible per position
Final Project 100 pts. possible
Beads on plate without filler metal 100 pts. possible
beads on plate with filler metal 100 pts. possible
corner joint welds 100 pts. possible
Homework chapters 4, 5, 6, 7, 25 100 pts. possible per chapter
Written Exams (midterm 4, 5, 25 Final 6, 7) 100 pts. possible per test
>90%------------A
80-89%---------B
70-79%---------C
60-69%---------D
<60%-----------F
Full attendance and participation in class and lab is regarded as a requirement and an obligation for learning. Students will be allowed to make up one excused absence with the prior approval of the instructor. Four absences will result in a failing grade for the semester, this equals 25% of class missed. Any absences or tardiness need to be emailed to instructor prior to scheduled class meeting for consideration of exemption.
Class will begin promptly at the designated time for class, any student arriving after this time will be counted tardy and lose pts. for the meeting. Students must return from breaks promptly and on time. Students must be released by the instructor before leaving the class or lab meeting.
Students must legibly sign in and out of class and lab to be counted present.
|
Class Meeting 1 TENATIVE SCHEDULE Class orientation, welding safety, equipment setup and operation |
Class Meeting 2 Oxy-acetylene cutting, making straight cuts, stopping and restarting cuts |
|
Class Meeting 3 Oxy-acetylene cutting, making straight cuts, stopping and restarting cuts |
Class Meeting 4 Oxy-acetylene cutting, making bevel cuts on plate ASSESSMENT #1 |
|
Class Meeting 5 Oxy-acetylene cutting, piercing holes, cutting circles |
Class Meeting 6 Oxy-acetylene cutting, making square cuts and bevel cuts on pipe |
|
Class Meeting 7 Track torch and Bevel machine Oxy-acetylene cutting |
Class Meeting 8 Oxy-acetylene cutting performance test MID TERM EXAM |
|
Class Meeting 9 Brazing and soldering steel and copper |
Class Meeting 10 Brazing and soldering steel and copper |
|
Class Meeting 11 Oxy-acetylene welding, carrying a weld puddle, making weld beads. Flat position, 14 ga sheet metal, tee welds, lap welds, butt welds |
Class Meeting 12 O/A welding Flat and Horizontal position, 14 ga sheet metal, tee welds, lap welds, butt welds ASSESSMENT #2 |
|
Class Meeting 13 O/A welding Vertical position, 14 ga sheet metal, tee welds, lap welds, butt welds |
Class Meeting 14 O/A Vertical position, 14 ga sheet metal, tee welds, lap welds, butt welds
|
|
Class Meeting 15 FINAL LAB PRACTICAL |
Class Meeting 16 FINAL WRITTEN EXAM, LAB CLEAN UP |
10/25/21 9:06 PM
10/25/21 9:06 PM