Monday-Thursday 7:00AM -7:30AM
Monday,Wed. 12:00pm -1:00 pm
If you have a disability (learning, mental, physical) that affects your ability to participate effectively and have access to any program or service at Amarillo College please contact Disability Services at (806) 345-5639 . Our offices are located in the Student Service Center office 112. More information may be found at www.actx.edu/disability.
Disability Services facilitates access to all programs and services according to the ADA, Americans with Disabilities Act and Section 504 of the Rehabilitation Act, as well as other federal and state laws.
Amarillo College is committed to providing equal access to all programs and services, including all working, learning, and service environments that affect equal access for persons with disabilities. This commitment to provide equal access and opportunity for persons with disabilities is in compliance with federal and state law. Amarillo College also strives to provide Electronic and Information Resources (EIR) that are accessible to all authorized users.
If you find you are unable to access material in an accessible format please contact the Disability Services Office at (806) 345-5639 . This office will work in conjunction with other campus resources to address and accommodate your issue in a timely manner.
As a student you may experience a range of issues that can cause barriers to learning, such as strained relationships, increased anxiety, alcohol/drug problems, feeling down, difficulty concentrating and/or lack of motivation. These mental health concerns or stressful events may lead to diminished academic performance or reduce a student's ability to participate in daily activities. Amarillo College offers services to assist you with addressing these and other concerns you may be experiencing. If you or someone you know are suffering from any of the aforementioned conditions, you can learn more about the broad range of confidential mental health services available on campus by calling the AC Counseling Center at 806-371-5900. The AC Counseling Center website is https://www.actx.edu/counseling/ . Also, if you are in need of social services (affordable housing, utilities, transportation, food, clothing, childcare, medical/dental/vision, legal), please call the AC Advocacy & Resource Center at 806-371-5439. The AC Advocacy & Resource Center website is https://www.actx.edu/arc
The Tutoring for Success policy applies to any student whose grade or performance in the course falls below a departmentally determined minimum threshold. In either of those cases, the instructor will direct the student to the appropriate tutoring service, which may be faculty-led, discipline-specific, and/or general. Under this policy, the instructor will follow specific departmental guidelines governing the use, duration, and grade component of the tutoring need.
Students who do not attend class on or prior to the census date will be administratively dropped. Effective Fall, 2016
Students who wish to withdraw from a course must complete all steps indicated on the Academic Withdrawal Request form by the course withdrawal deadline.
NOTE: Students who are attending Texas institutions of higher education, for the first time fall 2007 and later, may not withdraw from more than six courses during their academic career. This withdrawal limitation does not include dual credit or developmental classes (Senate Bill 1231 Rule 4.10.) For more information on Drop and Withdrawal Policies, please visit the Registrar's Office Web site.
The Amarillo College Privacy Policy is found at https://www.actx.edu/-amarillo-college-privacy-notice , and applies to all Amarillo College students. If you have questions about this privacy statement or you believe that your personal information has been released without your consent, send email to humanresources@actx.edu .
ABDR-2388-001 Internship - Autobody/Collision and Repair Technology/Technician
A work-based learning experience that enables the student to apply specialized occupational theory, skills and concepts. A learning plan is developed by the college and the employer.
Student ResourcesStudent Resources Website
Notice to Students enrolled in an educational program for preparation of issuance of certain occupational licenses:
Students enrolled in an educational program in preparation for obtaining certain occupational licenses are potentially ineligible for such license if the student has been convicted of an offense. For further information, please contact:
Melodie Graves
Justice Involved Advocate
Student Service Center 117
mgraves24@actx.edu
806-371-5995
Make appointment at https://melodiegraves.youcanbook.me
You can also contact the Legal Clinic, or the faculty member in charge of the educational program that you seek to enroll in. The further information you will receive will include notification to you of your right to request a criminal history evaluation letter from the licensing authority in order to clarify your particular situation.
(3 sem hrs; 144 contact hrs)
Hybrid
Every student will be required to wear an approved AC logo shirt or a shirt with the company logo that the student works for, to both class and lab. Pants will be respectable and wore properly, waist up around the waist. Safety glasses are the responsibility of the student and will be worn at all times while in the shop/lab environment. Clean up materials will be supplied as needed. Special tools will be supplied as needed. Safety shoes/boots, with slip resistance soles. Steel toes not required. No regular tennis shoes allowed.
Tools are required to be brought to class by the student. Necessary tools and equipment are provided for in class use for assigned class and lab projects.
Tools are required for student employment during program and before graduation. Tool Purchase Opportunities with discounts at Mac, Snap-on and Western Equipment will be given and encouraged.
Cost for these tools and boxes average $1500.00 - $2000.00. You are responsible for purchasing these tools before graduation.
Required professional and safety attire is mandatory for class and laboratory participation.
This list will be required for all AUMT and DEMR classes
|
Required |
Optional |
|
Adjustable Wrenches - 6" and 12" |
Chisel Set |
|
Allen Wrench Set - Standard (.050" - 3/8") |
Crowfoot Wrench Set - Metric |
|
Allen Wrench Set - Metric (2mm - 7mm) |
Crowfoot Wrench Set - Standard |
|
Combination Wrenches: Standard (1/4" - 1") |
Hack Saw and blades |
|
Combination Wrenches: Metric (7mm - 19mm) |
Drill- 3/8" and 1/2" variable speed, reversible |
|
16 oz. Ball Peen |
Brass Soft Faced |
|
Dead Blow |
Rubber Mallet |
|
Mallet Plastic Tip Sledge 2lb |
Impact Wrenches - 3/8" and 1/2" |
|
Flare Nut (tubing) Wrenches: Standard 3/8" - 3/4" |
Hose Clamp Pliers |
|
Flare Nut (tubing) Wrenches: Metric 10mm - 17mm |
Locking Jaw Needle Nose |
|
Penlight |
Punch Set |
|
Inspection Mirror |
External Set: E-4, E-5, E-6, E-8, E-10, E-12, E-14, E16 Torx® |
|
Pickup Tool - magnetic and claw type |
Tamper Proof Set: T8, T10, T15, T20, T27, T30, T40, T45, T50, T55 |
|
Plier Combinations 8” |
Screw Extractor Set |
|
Side Cutters 6” |
⅜ Drive Universal Joint |
|
Slip Joint (Water Pump) 8” |
1/4 Drive Universal Joint |
|
Needle Nose Pliers 8” |
1/2Drive Universal Joint |
|
Wire Strippers and Crimpers 16-22AWG |
Impact Sockets ⅜ drive: 3/8" - 3/4" shallow 3/8" - 3/4" deep |
|
Snap Ring Plier Set - internal and external |
Impact Sockets ⅜ drive: 10mm-19mm shallow 10mm-19mm deep |
|
Screwdriver - Blade Type: Stubby 6", 9", 12" |
1/2" Drive: Impact Sockets Standard 7/16" - 1 1/8" Shallow Impact Sockets Standard 7/16" - 1 1/8" Deep |
|
Screwdrivers - Phillips: Stubby #1, #2 6" #1, #2 12" #3 |
1/2" Drive: Impact Sockets 12mm - 32mm Shallow Impact Sockets 12mm - 32mm Deep |
|
Torx® Set: T-8, T-10, T-15, T-20, T-25, T-27, T-30, T-40, T-50, T-55 Torx® |
Torque Wrenches (Sound/Click)Type: 3/8" Drive in. lb. (30 - 250) |
|
Standard Socket Set - 1/4" Drive: 1/4" - 1/2" shallow 1/4" - 1/2" Deep |
Torque Wrenches (Sound/Click)Type: 3/8" Drive ft. lb. (5 - 75) |
|
Metric Socket Set - 1/4" Drive: 6mm - 12mm shallow 6mm - 12mm Deep |
Torque Wrenches (Sound/Click)Type: 1/2" Drive ft. lb. (50 - 250) |
|
¼ drive: 3", 6" Extensions |
Files - for steel and aluminum |
|
¼ drive: Ratchet |
|
|
Socket Set - 3/8" Drive: 5/16" - 3/4" Shallow 3/8" - 3/4" Deep |
Automotive Air Conditioning Gauge set |
|
Socket Set - 3/8" Drive: 9mm - 19mm Shallow 9mm - 19mm Deep |
A/C probe type thermometer |
|
3/8" Drive: 3", 6", 12", 18" Extensions |
|
|
3/8" Drive: Ratchet |
|
|
Socket Set - 1/2" Drive: 7/16" - 1 1/8"Shallow 7/16" - 1 1/8" Deep |
|
|
Socket Set - 1/2" Drive: 10mm - 25mm Shallow 10mm - 25mm Deep |
|
|
1/2" Drive: 5", 10" Extensions |
|
|
1/2" Drive: Ratchet |
|
|
Vernier Caliper (Dial or Digital) |
|
|
Tape Measure |
|
|
Pry Bar Set |
|
|
Safety Glasses |
|
|
Blowgun |
|
|
Gasket scraper |
|
|
Thickness Gauge Set |
|
|
Automotive Digital Multimeter |
|
|
Lockable Roll around Toolbox or Tool cart |
|
|
Closed Toe, Non-slip work shoes or boots |
|
|
AC Automotive or Diesel Logo Shirt |
In order to receive your AC Connect Email, you must log in through AC Connect at https://acconnect.actx.edu .
If you are an active staff or faculty member according to Human Resources, use "Exchange". All other students, use "AC Connect (Google) Email".
Maturity, honesty and respect is required and given.
As a participating student in Amarillo College Technical Programs, you will be expected to act, perform and train in a professional manner.
Compliance with the Amarillo College Technical Education Code of Professional Conduct is mandatory for class participation.
Students must come to class wearing the appropriate AC uniform shirt or a shirt with the company logo that the student works for.
Student MUST wear safety glasses in the shop/lab.
No cell phones are to be in use during class unless requested by instructor.
Students will be respectful of other classes being conducted in the building, respectful of instructor.
Students are expected to dress appropriately (shirts tucked in, no profanity on clothing, pants must be worn around the waist).
No head gear to be worn in building, except in shop, then must be worn appropriately.
No tobacco or e-vape use on campus.
Student will have the text book out following along with lecture and participating in the lecture and class.
Horseplay or unsafe behaviors will not be tolerated. You will be asked to leave and you will be given a zero for the day.
20% daily attendance and participation
25% homework/assignments
15% tests
30% labs and task sheets
10% final exam all students must take the final
All students must take Final on campus to receive credit. Finals are the last week of the 8 weeks. Review and cleanup will be Monday and Tuesday of that week. Finals will be Wednesday and Thursday. If a student is at 70% or below they are required to go to mandatory tutoring.
Grades Scored Between Equals
90% and up A
80% and Less Than 90% B
70% and Less Than 80% C
60% and Less Than 70% D
0% and Less Than 60% F
Attendance
If a student misses 10% of total class time a letter grade will be deducted
Students must attend 80% of the scheduled class time or they will be asked to drop from the class or fail
Students arriving 15 or more minutes late or leaving 15 or more minutes early receive a 50% for the day, 4 lates equals a absent (This includes taking longer breaks than given)
All assignments have a Due date and will not be accepted after that date, unless it is done in tutoring with max of 80%
Students must wear AC logo or industry uniform shirt for class. Must have eye protection to enter the shop. Long hair must be put up.
Students must sign themselves in and out. Students are not allowed to sign another student in or out.
This schedule is a tentative outline of times and test. These dates are subject to change dependent on speed of individual classes and informational transition to students. If you plan on missing any days of instruction, your instructor must be given this information in writing, or E-Mail. Failure to follow these instructions forfeits the student’s ability to make up work test outside of the instructors permission.
This class will meet depending the schedule of the students internship
Enrolling in this class will qualify the student for large Snap-on and MAC tool discounts on required tools for class and work. See instructor.
Students are advised to have a job as a Diesel Technician helper at a local dealership or repair facility.
01/14/22 3:00 PM
01/14/22 3:00 PM