Automotive Engine Performance Analysis II Syllabus for 2022-2023
Return to Syllabus List

Instructor Information

Office Location

<p>RM 107G</p>

Office Hours

Mon-Thur  7:00-7:30 11:30-12:00

Course Information

COVID-19 Protocols

Recording Policy

Disability Statement

If you have a disability (learning, mental, physical) that affects your ability to participate effectively and have access to any program or service at Amarillo College please contact Disability Services at (806) 345-5639 . Our offices are located in the Student Service Center office 112. More information may be found at www.actx.edu/disability.
Disability Services facilitates access to all programs and services according to the ADA, Americans with Disabilities Act and Section 504 of the Rehabilitation Act, as well as other federal and state laws.

Amarillo College Web Accessibility Policy Statement

Amarillo College is committed to providing equal access to all programs and services, including all working, learning, and service environments that affect equal access for persons with disabilities. This commitment to provide equal access and opportunity for persons with disabilities is in compliance with federal and state law. Amarillo College also strives to provide Electronic and Information Resources (EIR) that are accessible to all authorized users.

If you find you are unable to access material in an accessible format please contact the Disability Services Office at (806) 345-5639 . This office will work in conjunction with other campus resources to address and accommodate your issue in a timely manner.

Statement for Mental Health and Advocacy & Resource Center:

As a student you may experience a range of issues that can cause barriers to learning, such as strained relationships, increased anxiety, alcohol/drug problems, feeling down, difficulty concentrating and/or lack of motivation. These mental health concerns or stressful events may lead to diminished academic performance or reduce a student's ability to participate in daily activities. Amarillo College offers services to assist you with addressing these and other concerns you may be experiencing. If you or someone you know are suffering from any of the aforementioned conditions, you can learn more about the broad range of confidential mental health services available on campus by calling the AC Counseling Center at 806-371-5900. The AC Counseling Center website is https://www.actx.edu/counseling/ . Also, if you are in need of social services (affordable housing, utilities, transportation, food, clothing, childcare, medical/dental/vision, legal), please call the AC Advocacy & Resource Center at 806-371-5439. The AC Advocacy & Resource Center website is https://www.actx.edu/arc

Amarillo College Tutoring for Success Policy:

The Tutoring for Success policy applies to any student whose grade or performance in the course falls below a departmentally determined minimum threshold. In either of those cases, the instructor will direct the student to the appropriate tutoring service, which may be faculty-led, discipline-specific, and/or general. Under this policy, the instructor will follow specific departmental guidelines governing the use, duration, and grade component of the tutoring need.

Administrative Drop Policy

Students who do not attend class on or prior to the census date will be administratively dropped. Effective Fall, 2016

Student Withdrawal Procedures

Students who wish to withdraw from a course must complete all steps indicated on the Academic Withdrawal Request form by the course withdrawal deadline.

NOTE: Students who are attending Texas institutions of higher education, for the first time fall 2007 and later, may not withdraw from more than six courses during their academic career. This withdrawal limitation does not include dual credit or developmental classes (Senate Bill 1231 Rule 4.10.) For more information on Drop and Withdrawal Policies, please visit the Registrar's Office Web site.

Privacy Statement

The Amarillo College Privacy Policy is found at https://www.actx.edu/-amarillo-college-privacy-notice , and applies to all Amarillo College students.  If you have questions about this privacy statement or you believe that your personal information has been released without your consent, send email to humanresources@actx.edu .

Course

AUMT-2334-001 Automotive Engine Performance Analysis II

Prerequisites

Prerequisite: AUMT 1305

Course Description

Diagnosis and repair of emission systems, computerized engine performance systems and advanced ignition and fuel systems. Includes use of advanced engine performance diagnostic equipment. May be taught manufacturer specific.

Student ResourcesStudent Resources Website

Department Expectations

Occupational License Disclaimer

Notice to Students enrolled in an educational program for preparation of issuance of certain occupational licenses:

Students enrolled in an educational program in preparation for obtaining certain occupational licenses are potentially ineligible for such license if the student has been convicted of an offense. For further information, please contact:

Melodie Graves
Justice Involved Advocate
Student Service Center 117
mgraves24@actx.edu
806-371-5995
Make appointment at https://melodiegraves.youcanbook.me

You can also contact the Legal Clinic, or the faculty member in charge of the educational program that you seek to enroll in. The further information you will receive will include notification to you of your right to request a criminal history evaluation letter from the licensing authority in order to clarify your particular situation.

Hours

(3 sem hrs; 2 lec, 2 lab)

Class Type

Hybrid

Syllabus Information

Textbooks

Cengage Mindtap

Students are required to bring a laptop, chromebook, or tablet.

Supplies

When on campus - AC Logo Shirt or industry uniform

Safety glasses or goggles

Closed toe, non-slip work shoes or boots

 

A smart device or computer that can access the internet and your coursework on Blackboard, including Cengage and ProDemand

Every student will be required to wear an approved AC logo shirt or a shirt with the company logo that the student works for, to both class and lab. Pants will be respectable and wore properly, waist up around the waist.  Safety glasses are the responsibility of the student and will be worn at all times while in the shop/lab environment. Clean up materials will be supplied as needed. Special tools will be supplied as needed. Safety shoes/boots, with slip resistance soles. Steel toes not required. No regular tennis shoes allowed.

 

 

 

Required professional and safety attire is mandatory for class and laboratory participation.

 

 

Student Performance

WECM End-of-Course Outcomes: Explain engine diagnostic techniques; identify engine components; explain engine operation; and identify signs of engine component failure.

ASE TASK LIST

General: Engine Diagnosis; Removal and Reinstallation (R&R)

  • Complete work order to include customer information, vehicle identifying information, customer concern, related service history, cause, and correction. (P-1)
  •  
  • Research applicable vehicle and service information, including fluid type, internal engine operation, vehicle service history, service precautions, and technical service bulletins. (P-1)
  •  
  • Verify operation of the instrument panel engine warning indicators. (P-1)
  •  
  • Inspect engine assembly for fuel, oil, coolant, and other leaks; determine needed action. (P-1)
  •  
  • Install engine covers using gaskets, seals, and sealers as required. (P-1)
  •  
  • Verify engine mechanical timing. (P-1)
  •  
  • Perform common fastener and thread repair, to include: remove broken bolt, restore internal and external threads, and repair internal threads with thread insert. (P-1)
  •  
  • Inspect, remove, and/or replace engine mounts. (P-2)
  •  
  • Identify service precautions related to service of the internal combustion engine of a hybrid vehicle.    (P-2)
  •  
  • Remove and reinstall engine on a newer vehicle equipped with OBD; reconnect all attaching components and restore the vehicle to running condition. (P-3)

Cylinder Head and Valve Train Diagnosis and Repair

  • Remove cylinder head; inspect gasket condition; install cylinder head and gasket; tighten according to manufacturers' specification and procedure. (P-1)
  •  
  • Clean and visually inspect a cylinder head for cracks; check gasket surface areas for warpage and surface finish; check passage condition. (P-1)
  •  
  • Adjust valves (mechanical or hydraulic lifters). (P-1)
  •  
  • Inspect and replace camshaft and drive belt/chain; includes checking drive gear wear and backlash, end play, sprocket and chain wear, overhead cam drive sprocket(s), drive belt(s), belt tension, tensioners, camshaft reluctor ring/tone-wheel, and valve timing components; verify correct camshaft timing. (P-1)
  •  
  • Establish camshaft position sensor indexing. (P-1)
  •  
  • Inspect pushrods, rocker arms, rocker arm pivots and shafts for wear, bending, cracks, looseness, and blocked oil passages (orifices); determine needed action. (P-2)

Engine Block Assembly Diagnosis and Repair

  • Remove, inspect, and/or replace crankshaft vibration damper (harmonic balancer). (P-2)

Lubrication and Cooling Systems Diagnosis and Repair

  • Perform cooling system pressure and dye tests tol identify leaks; check coolant condition and level; inspect and test radiator, pressure cap, coolant recovery tank, heater core, and galley plugs; determine needed action. (P-1)
  •  
  • Identify causes of engine overheating. (P-1)
  •  
  • Inspect, replace, and/or adjust drive belts, tensioners, and pulleys; check pulley and belt alignment.    (P-1)
  •  
  • Inspect and test coolant; drain and recover coolant; flush and refill cooling system; use proper fluid type per manufacturer specification; bleed air as required. (P-1)
  •  
  • Remove, inspect, and replace thermostat and gasket/seal. (P-1)
  •  
  • Inspect and test fan(s), fan clutch (electrical or mechanical), fan shroud, and air dams; determine needed action. (P-1)
  •  
  • Perform oil pressure tests; determine needed action. (P-1)
  •  
  • Perform engine oil and filter change; use proper fluid type per manufacturer specification. (P-1)
  •  
  • Inspect, remove, and replace water pump. (P-2)
  •  
  • Remove and replace radiator. (P-2)
  •  
  • Inspect, test, and replace oil temperature and pressure switches and sensors. (P-2)
  •  
  • Inspect auxiliary coolers; determine needed action. (P-3)

Students Rights and Responsibilities

Student Rights and Responsibilities

Log in using the AC Connect Portal

In order to receive your AC Connect Email, you must log in through AC Connect at https://acconnect.actx.edu .

If you are an active staff or faculty member according to Human Resources, use "Exchange". All other students, use "AC Connect (Google) Email".

Expected Student Behavior

Welcome to the Amarillo College Technical Education Division. We wish you the best in your educational pursuit. It is our responsibility to provide you the education, training, and "hands-on" practice to become a professional in your chosen field in a safe environment. The instruction, equipment, and facilities are provided for your use as outlined by your Administration, Program Coordinator and Faculty. Studying, practicing, and learning are required by you.

As a participating student in Amarillo College Technical Programs, you will be expected to act, perform and train in a professional manner. The following rules and guidelines are to be followed by everyone for your safety and to foster a learning environment.

Attendance: Unless it is an emergency, we highly recommend you not miss class. Recovery of missed information will be the responsibility of you (the student). Class begins at the scheduled time. If you are not in your seat in class or at the designated location during laboratory exercises, you will be counted tardy. You will be required to show an acceptable understanding of the topic(s) covered during your absence. Check syllabus for your instructor’s policy regarding attendance.

Professional Attire: Required professional attire and PPE is mandatory for class and laboratory participation. Every student will be required to wear an approved AC logo shirt to both class and lab. Shirts must be ordered through your advisor during the registration process. It is recommended that you purchase one shirt for every class in which you are registered

Pants will be:  clean and well maintained

 no large rips or tears  held at the waist (i.e., no sagging)

 blue jeans or long pants (no sweats/exercise pants)

 have no hanging chains/loose strings (safety issue)

AC Shirts must be tucked in at all times while in the classroom and lab, unless otherwise stated by your Instructor. You are expected to reflect the dignity, pride and respect of an industry professional. As a representative of Amarillo College’s Technical Education Program you shall wear your AC logo shirt while in the classroom and on the training field or in the laboratory.

There will be no caps, hats, bandanas, beanies, or hoods worn in Amarillo College class rooms. Religious or medicinal attire must be discussed with your instructor and/or Department Chair. Lab attire will be determined by your instructor. Please check your syllabus.

Your Personal Protective Equipment (PPE) shall be worn when indicated by the instructor in charge during any training, field, or laboratory exercises. It is your responsibility to keep your equipment clean and in good shape.

Tools / Equipment / Books / Supplies / PPE: You must come to class with the required list of tools/equipment/books/supplies/PPE listed on your syllabus in order to participate and earn credit for the day

Conduct: Due to the importance of maintaining a safe atmosphere for the training, disruptive behavior will not be tolerated. All students are expected to be respectful, courteous, attentive and quiet in order to support the learning environment.

Amarillo College Campuses are Smoke Free as of August 1, 2016. Smoking is permitted off of College property.

You will refrain from the use of abusive or slanderous language. There will be no horseplay, fighting, harassment or misconduct by anyone. Any student who uses, has in their possession, or is under the influence of illegal drugs or alcohol on campus or at the training field will immediately be turned over to the campus police for appropriate action. There will be a ZERO tolerance policy and immediate steps taken toward withdrawal from Amarillo College.

Anyone who is caught cheating on an exam or quiz will immediately be excused from class and not allowed to return. This is an Amarillo College rule and will be strictly enforced. This applies to plagiarism as well.

Electronic Devices: All electronic devices producing audible sounds must be silenced during class and on the laboratory/training field. All visual slides and materials are the property of the College and may be copyright protected, hence no photocopy is allowed. See the syllabus for your instructor’s policy on this matter.

Grievances: Any student who feels that there is a conflict with a course instructor should first make every effort to resolve the matter with the instructor. If you are unable to resolve differences, you should seek resolution from the immediate supervisor of the instructor, or course coordinator, or Associate Dean of Technical Education.

NOTE: Compliance with the Amarillo College Technical Education Code of Professional Conduct is mandatory for class participation

Grading Criteria

 
Grading Criteria
20% daily attendance and participation
15% homework
15% tests
30% labs and tasksheets
20% final exam all students must take the final on campus
Finals are the last week of the 8 weeks. Review and cleanup will be Monday and Tuesday of that week. Finals will be Wednesday and Thursday 

Attendance

Class attendance is mandatory and will effect final grade. Learning tricks of the trade will only come from attending lectures and hands on instruction.

 

Attendance    
If a student misses 10% of total class time they get deducted a letter grade
Students must attend class 75% of scheduled class time or they will be asked dropped from the class or fail
Students arriving 15 or more minutes late or leave 15 or more minutes early receive a 50% for the day
All assignments have a Due date and will not be accepted after that date

Students must wear AC logo work shirt for class

Leaving without signing out is same as Early Departure Unexcused.

Signing out early without instructor’s permission is same as Early Departure Unexcused.

 Students must sign themselves in and out. Students are not allowed to sign another student in or out.

Mandatory Tutoring for 70% or below, 2hrs per week per course.

Only will reopen the previous week after current week is complete, previous week can only be completed to a 80%.

 

Calendar

Additional Information

Some information presented may be manufacturer specific. 

You MUST get your Instructor's permission to bring a vehicle into the shop. If you do not, you WILL be asked to leave the shop.

Vehicles are not to remain "overnight". Any work performed MUST be completed by the end of class. Verify you have ALL parts and supplies needed to complete any maintenance or repair. If unsure, ask your instructor prior to work being started.  

All vehicles brought into the shop MUST have a repair order filled out and placed on the windshield. 

Honk your horn prior to entering and leaving the shop. 

Have a window down and keys outside of the vehicle to prevent being locked out. 

Syllabus Created on:

10/05/22 10:37 AM

Last Edited on:

10/23/24 11:06 AM