Introduction to Environmental Safety and Health Syllabus for 2011-2012
Return to Syllabus List

Instructor Information

Phone

Office Location

Office Hours

Course Information

Recording Policy

Disability Statement

Any student who, because of a disabling condition, may require some special arrangements in order to meet course requirements should contact disAbility Services (Student Service Center room 119, phone 371-5436) as soon as possible.

Statement for Mental Health and Advocacy & Resource Center:

As a student you may experience a range of issues that can cause barriers to learning, such as strained relationships, increased anxiety, alcohol/drug problems, feeling down, difficulty concentrating and/or lack of motivation. These mental health concerns or stressful events may lead to diminished academic performance or reduce a student's ability to participate in daily activities. Amarillo College offers services to assist you with addressing these and other concerns you may be experiencing. If you or someone you know are suffering from any of the aforementioned conditions, you can learn more about the broad range of confidential mental health services available on campus by calling the AC Counseling Center at 806-371-5900. The AC Counseling Center website is https://www.actx.edu/counseling/ . Also, if you are in need of social services (affordable housing, utilities, transportation, food, clothing, childcare, medical/dental/vision, legal), please call the AC Advocacy & Resource Center at 806-371-5439. The AC Advocacy & Resource Center website is https://www.actx.edu/arc

Amarillo College Tutoring for Success Policy:

Administrative Drop Policy

N/A

Student Withdrawal Procedures

N/A

Privacy Statement

The Amarillo College Privacy Policy is found at https://www.actx.edu/-amarillo-college-privacy-notice , and applies to all Amarillo College students.  If you have questions about this privacy statement or you believe that your personal information has been released without your consent, send email to humanresources@actx.edu .

Course

EPCT-1307-001 Introduction to Environmental Safety and Health

Prerequisites

Course Description

An historic overview of environmental safety and health. Emphasis is on the use of occupational safety and health codes.

Student Resources Student Resources Website

Department Expectations

\N

Occupational License Disclaimer

Hours

(3 sem hrs; 3 lec)

Class Type

On Campus Course

Syllabus Information

Textbooks

\ Two books are required for this course:

\

\ 1.  Occupational Safety Class Notes: Author: Neil Mock and Sandra Jefferson; Publisher Amarillo College Bookstore; No ISBN Number. 

\

\ 2.  Keller’s Official Safety Handbook 6th Edition: Author Keller Staff; Publisher: JJ Keller & Associates: ISBN Number 1-59042-078-0.

Supplies

\ Note book; preferably a 3-ring binder.

\

\ Writing instrument

Student Performance

\ The objective upon completion is to provide the student a study of OSHA health and safety regulations as they pertain to protecting workers from exposure to occupational hazards, and to introduce a "proactive" philosophy to compliance with OSHA.

\

\  The objective upon completion is to provide the student a study of OSHA health & safety regulations as they pertain to protecting workers from exposure to occupational hazards, and to introduce a "proactive" philosophy to compliance with OSHA.

Students Rights and Responsibilities

Student Rights and Responsibilities

Log in using the AC Connect Portal

In order to receive your AC Connect Email, you must log in through AC Connect at https://acconnect.actx.edu .

If you are an active staff or faculty member according to Human Resources, use "Exchange". All other students, use "AC Connect (Google) Email".

Expected Student Behavior

All students are expected to conduct themselves in a manner as outlined in the Student Code of Conduct in the 29-21 Student Rights and Responsibilities.  Please see: http://catalog.actx.edu/content.php?catoid=7&navoid=291#StudentConduct

Cell Phone Use:
In order to provide an atmosphere conducive to learning, telephone calls and texting will not be permitted during class.  
Please make sure phones are silenced. Chiming and ring tones should not interrupt class. 
If you receive a call or text that must be answered, please leave the classroom to reply. 
Texting during class will not be allowed.

Grading Criteria

 

Examinations Projects and Attendance:

Exam

100 points

2 each

200 points

 

 

 

 

Final

200 points

1 each

200 points

Homework

20 points

16 each

320 points

Class worksheets

50 points

4 each

200 points

Attendance

5 points

16 each

80 points

Late Attendance
(After Roll Call)

3 points only

 

Total Possible Points

1000 points

The final is a comprehensive examination (200 points possible) and will be the last exam of the semester.  The final accounts for approximately 20% of your total grade.

Grading is on a point system.

A total of  1000+ points can be earned.

A (90-100%) = 900 - 1000+ points 

B (80-89%) = 800 - 899 points

C (70-79%) = 700 - 799 points

D (60-69%) = 600 - 699 points

F (< 60%) = < 599 points

In class work cannot be made up.
 
If you miss a class, it is your responsibility to find out the assignment from a classmate and it is due at the same time as the rest of the class.
 
Make up tests can be taken at 70 percent credit, if arrangements are made prior to date of test. If arrangements are not made prior to the test and you do not call before the test, you will not be allowed to take the test.

Attendance

Your presence in class will affect your grade

5 points will be awarded for each class a student is present.

Dockage of at least 2 points when Tardy; Only 3 points or less will be awarded for late students.

                  

 

Calendar

Day 1              

Introduction & Syllabus
History of Safety
McWane Film
 
Day 2  
           
Regulations - Mark Scantron as Assignment 1  (All Assignments are due next class)
Silent Spring film
McWane revisited
Assignment:
Hazard Communication (JJ Keller p. 101-108) scantron 1-10                      
 
        
Day 3  
           
Hazard Communication
MSDS Worksheet (50 points)
Reactive Video Worksheet and Film (50 points)
Assignments:
Eye Protection (JJ Keller p. 43-50) scantron 21-30
Foot Protection (JJ Keller p. 77-84) scantron 41-50
Hand Protection (JJ Keller p. 95-100) scantron 51-60
Head Protection (JJ Keller p. 109-114) scantron 71-80 
               
Day 4
 
Toxicology (Handout)                                   
Exposure Limits (Handout)
Personal Protective Equipment
(Eye Protection, Foot Protection, Hand Protection, and Head Protection)
Assignment:
Respiratory Protection (JJ Keller p 167-176) scantron 1-10
 
Day 5 
 
Respiratory Protection
Test Review
Assignment:
Emergency Spill Response (JJ Keller p. 33-42) scantron 1-10
  
Day 6 
             
Test 1                
                                 
Day 7
              
Emergency Spill Response and Hazardous cargo film
DOT Emergency Response Guidebook Exercise (50 points)
Assignment: 
Slips, Trips, and Falls (JJ Keller p. 177-190) scantron 21-30
Hearing Conservation (JJ Keller p. 115-124) scantron 41-50
 
Day 8 
             
Slips, Trips, and Falls
Hearing Conservation                                   
Assignment:
Fire Prevention (JJ Keller p. 51-62) scantron 1-10                                                                            
                
 
Day 9 
             
Means of Egress
Fire Prevention
Assignment:
Confined Space Entry (JJ Keller p. 11-18) scantron 21-30
 
Day 10
           
Confined Space and film      
Assignment:
Lifting and Ergonomics (JJ Keller p. 125-136) scantron 1-10                                                           
Electrical Safety (JJ Keller p. 19-32) scantron 21-30             
Test 2 Review
 
Day 11            
 
Test #2  
                                               
Day 12
 
Lifting & Ergonomics
Electrical safety
Assignment:
Machine Guarding (JJ Keller p. 147-156) scantron 1-10                                                      
Tool Safety (JJ Keller p. 191-202) scantron 21-30                                         
 
Day 13
           
Machine Guarding
Tool Safety                                 
Assignment:             
Lockout/Tagout (JJ Keller p. 137-146) scantron 1-10                                   
Violence in the Workplace (JJ Keller p. 203-208) scantron 21-30               
Welding (JJ Keller p. 209-222) scantron 41-50
 
Day 14
                      
Lockout/Tagout
Violence in the Workplace film
Welding
 
Day 15
           
Wrap up - complete any unfinished business
Final Review
 
Day 16
           
Final Test

Additional Information

\ After studying the materials presented in this course of study, the student will be able to do the following as evaluated by the faculty of the department/program.

\
    \
  1. \ Ascertain the purpose of the U.S. Labor Department's Occupational Safety and Health Administration (OSHA) and its relationship to other federal agencies.
  2. \
  3. \ Find, interpret, summarize and apply, the safety and health standards in Title 29 of the Code of Federal Regulations (CFR); and for new standards, the Federal Register.
  4. \
  5. \ Gain knowledge of, and apply the following approaches used to communicate workplace hazards: Information and training programs; signs, labels, and hazard warnings; recordkeeping and reporting requirements; and medical and exposure surveillance programs.
  6. \
  7. \ Learn and apply the following approaches used to control employee hazard exposure, worker exposure limits (PELs), engineering controls, and restriction of access.
  8. \
  9. \ Learn and apply the following approaches used to protect employees from hazard exposure: personal protective equipment(PPE), emergency evacuation and response plan
  10. \
\

\  

Syllabus Created on:

11/30/-1 12:00 AM

Last Edited on:

11/30/-1 12:00 AM