Gas Tungsten Arc Welding I (GTAW) Syllabus for 2013-2014
Return to Syllabus List

Instructor Information

Course Information

Recording Policy

Disability Statement

Any student who, because of a disabling condition, may require some special arrangements in order to meet course requirements should contact disAbility Services (Student Service Center room 119, phone 371-5436) as soon as possible.

Statement for Mental Health and Advocacy & Resource Center:

As a student you may experience a range of issues that can cause barriers to learning, such as strained relationships, increased anxiety, alcohol/drug problems, feeling down, difficulty concentrating and/or lack of motivation. These mental health concerns or stressful events may lead to diminished academic performance or reduce a student's ability to participate in daily activities. Amarillo College offers services to assist you with addressing these and other concerns you may be experiencing. If you or someone you know are suffering from any of the aforementioned conditions, you can learn more about the broad range of confidential mental health services available on campus by calling the AC Counseling Center at 806-371-5900. The AC Counseling Center website is https://www.actx.edu/counseling/ . Also, if you are in need of social services (affordable housing, utilities, transportation, food, clothing, childcare, medical/dental/vision, legal), please call the AC Advocacy & Resource Center at 806-371-5439. The AC Advocacy & Resource Center website is https://www.actx.edu/arc

Amarillo College Tutoring for Success Policy:

Administrative Drop Policy

N/A

Student Withdrawal Procedures

N/A

Privacy Statement

The Amarillo College Privacy Policy is found at https://www.actx.edu/-amarillo-college-privacy-notice , and applies to all Amarillo College students.  If you have questions about this privacy statement or you believe that your personal information has been released without your consent, send email to humanresources@actx.edu .

Course

WLDG-1378-001 Gas Tungsten Arc Welding I (GTAW)

Prerequisites

WLDG 1374 and WLDG 1376

Course Description

Instruction and practice of equipment inspection, maintenance, repair and set up for gas tungsten arc welding. Instruction and practice in the production of fillet and groove welds in all positions on carbon steel, stainless steel and aluminum. Practice and production of assemblies and coupons to be examined and tested according to Section 8 AWS SENSE QC10.

Student Resources Student Resources Website

Department Expectations

\N

Occupational License Disclaimer

Hours

(3 sem hrs; 2 lec, 3 lab)

Class Type

On Campus Course

Syllabus Information

Textbooks

\ WELDING SKILLS, 4th Edition

\ ISBN #978-0-8269-2992-1

\ WELDING SKILLS WORKBOOK, 4th Edition

\ ISBN #978-0-8269-2993-8

Supplies

\
• \ Bibs or Sleeves
\
• \ Gloves
\
• \ Head Covering, e.g. Welding Cap or Cotton Head Coverings
\
• \ Heavy Denim or Wool Shirts
\
• \ Jeans, Wool Pants, Coveralls or Overalls
\
• \ Leath

  Student Performance

  \
  • \ Prepares time or job cards, reports or records.
  \
  • \ Performs housekeeping duties.
  \
  • \ Follows verbal instructions to complete work assignments.
  \
  • \ Follows written instructions to complete work assignments.
  \
  • \ Performs safety inspections of GTAW equipment and accessories.
  \
  • \ Makes minor external repairs to GTAW equipment and accessories.
  \
  • \ Sets up for GTAW operations on carbon steel.
  \
  • \ Operates GTAW equipment on carbon steel.
  \
  • \ Makes fillet welds in all positions on carbon steel.
  \
  • \ Makes groove welds in all positions on carbon steel.
  \
  • \ Passes GTAW welder performance qualification test on carbon steel.
  \

  Students Rights and Responsibilities

  Student Rights and Responsibilities

  Log in using the AC Connect Portal

  In order to receive your AC Connect Email, you must log in through AC Connect at https://acconnect.actx.edu .

  If you are an active staff or faculty member according to Human Resources, use "Exchange". All other students, use "AC Connect (Google) Email".

  Expected Student Behavior

  \ \ \ \ \ \

  \ \ Notebook & Class Equipment \ \ Students are recommended to take notes during lectures and should maintain a class notebook containing handouts and reference materials. Students shall furnish personal protective equipment to include safety glasses and have their own personal hand tools similar to those on the department tool list. \ \   \ \ Shop Policy \ \ Read safety handouts provided, use common sense, maintain safe shop practices, keep your Lab clean, and orderly. Keep all safety shields/guards, and equipment in place at all times. Notify your Instructor of faulty wiring/equipment, worn or damaged tools, or missing parts. No horseplay is allowed whatsoever. Academic disciplinary measures will be promptly administered to offending person(s). Please help the Instructor to maintain order so that he can be free to use your time for more effective teaching, and less time housekeeping. We all can enjoy the benefits of an effective and conducive learning environment. Remember to use your safety glasses when entering the shop area. \ \   \ \ Tools, Equipment, and Clothing \ \ Students shall wear appropriate clothing to perform any work task assigned. Tools and equipment specified for this class and any preliminary class in the curriculum are to be furnished by the student. Failure to dress for work or bring needed equipment may count as an absence. All tools should be properly used and cared for, thus allowing for longevity and safety of both the user and the tool. \ \   \ \ Stealing, vandalism, or pilferage will be dealt with severely!! No drugs, tobacco, drinks, or food allowed! \ \   \ \ All students are expected to follow the Amarillo College Students Code of Conduct. Any violation of this Code will be dealt with appropriately. \ \   \

  Grading Criteria

  Students should complete all projects and performance tests at the REQUIRED PROFESSIONAL LEVEL.   They will be scored on neatness, completeness, procedure, professionalism, attitude, attendance and punctuality, shop cleanup, and SAFETY PRACTICES. 

  Attendance/Participation            15 pts/session possible            15 sessions            225 pts. possible

  Projects/Performance                15 pts/session possible             15 sessions           225 pts. possible

  Homework/Exams                                                                                                250 pts. possible

  2G Bend Test                                                                                                      150 pts. possible

  3G Bend Test                                                                                                      150 pts. possible

                                                                                            TOTAL                      1000 pts. possible

   

         >92%----------A

         85-92%-------B

         77-84%-------C

         70-76%-------D

         <70%----------F

                                                                                    

  Attendance

  \ Attendance in class and lab participation is regarded as a requirement and an obligation for learning.  Students will be allowed to make up two excused absences with the prior approval of the instructor.  Extra shop time as needed to complete projects can be arranged on a "space available" basis.  Must have approval of instructor.

  \

  \  

  Calendar

  Class Meeting 1   TENATIVE SCHEDULE Class orientation, welding safety, equipment setup and operation	Class Meeting 2 Equipment familiarization, weld beads on flat plate
  Class Meeting 3 Lap welds, 14 ga. steel, flat, horizontal, vertical, and overhead	Class Meeting 4 Lap welds, 14 ga. steel, flat, horizontal, vertical, and overhead
  Class Meeting 5 Tee welds, 14 ga. steel, horizontal, vertical, and overhead	Class Meeting 6 Tee welds, 14 ga. steel, horizontal, vertical, and overhead First Written Exam
  Class Meeting 7 Butt welds, 14 ga. steel, flat, horizontal, vertical, and overhead	Class Meeting 8 Butt welds, 14 ga. steel, flat, horizontal, vertical, and overhead
  Class Meeting 9 3/8" steel plate, v-groove, open butt, root and hot pass, (3G	Class Meeting 10 3/8" steel plate, v-groove, open butt, root and hot pass, (3G)
  Class Meeting 11 3/8" steel plate, v-groove, open butt, root and hot pass, (3G) Guided Bend Test	Class Meeting 12 3/8" steel plate, v-groove, open butt, root and hot pass, (2G)
  Class Meeting 13 3/8" steel plate, v-groove, open butt, root and hot pass, (2G) Second Written Exam	Class Meeting 14 3/8" steel plate, v-groove, open butt, root and hot pass, (2G) Guided Bend Test
  Class Meeting 15 3/8" steel plate, v-groove, open butt, root and hot pass, (4G)	Class Meeting 16 3/8" steel plate, v-groove, open butt, root and hot pass, (4G)

   

  Additional Information

  \N

  Syllabus Created on:

  11/30/-1 12:00 AM

  Last Edited on:

  11/30/-1 12:00 AM