Normal office hours are one hour after morning classes and one hour before evening classes. Outside of these hours, please call and make an appointment.
Any student who, because of a disabling condition, may require some special arrangements in order to meet course requirements should contact disAbility Services (Student Service Center room 119, phone 371-5436) as soon as possible.
As a student you may experience a range of issues that can cause barriers to learning, such as strained relationships, increased anxiety, alcohol/drug problems, feeling down, difficulty concentrating and/or lack of motivation. These mental health concerns or stressful events may lead to diminished academic performance or reduce a student's ability to participate in daily activities. Amarillo College offers services to assist you with addressing these and other concerns you may be experiencing. If you or someone you know are suffering from any of the aforementioned conditions, you can learn more about the broad range of confidential mental health services available on campus by calling the AC Counseling Center at 806-371-5900. The AC Counseling Center website is https://www.actx.edu/counseling/ . Also, if you are in need of social services (affordable housing, utilities, transportation, food, clothing, childcare, medical/dental/vision, legal), please call the AC Advocacy & Resource Center at 806-371-5439. The AC Advocacy & Resource Center website is https://www.actx.edu/arc
N/A
N/A
The Amarillo College Privacy Policy is found at https://www.actx.edu/-amarillo-college-privacy-notice , and applies to all Amarillo College students. If you have questions about this privacy statement or you believe that your personal information has been released without your consent, send email to humanresources@actx.edu .
HART-2336-001 Air Conditioning Troubleshooting
HART 1307
An advanced course in application of troubleshooting principles and use of test instruments to diagnose air conditioning and refrigeration components and system problems including conducting performance tests.
Student Resources Student Resources Website
\N
(3 sem hrs; 2 lec, 2 lab)
On Campus Course
\ HANDYMAN~IN~YOUR~POCKET
\\ Young/Glover
\\ Published by Sequoia
\\ ISBN 1-885071-29-9
\\
\\ Tool Box/Bag
\\ Fuse Puller
\\ Pliers
\\ Channel Lock Pliers
\\ Needle Nose Pliers
\\ Side Cutter Pliers
\\ Screw Driver Assortment
\\ &
\ HART-2336 Air Conditioning Trouble Shooting
\In order to receive your AC Connect Email, you must log in through AC Connect at https://acconnect.actx.edu .
If you are an active staff or faculty member according to Human Resources, use "Exchange". All other students, use "AC Connect (Google) Email".
\ Notebook & Class Equipment
\\ Students are required to take notes during lectures and should maintain a class notebook. Notebook should contain handouts, reference material, formula sheets, test, assignments, and task list. Student shall furnish a scientific calculator and personal protective equipment to include safety glasses. Student shall have their own personal hand tools similar to those on the department service tool list. Student shall furnish necessary computer media for information transfer. Student shall furnish required text and Handyman Pocket Handbook.
\\
\\ Shop Policy
\\ Read safety handouts provided, use common sense, maintain safe shop practices, keep your Lab clean, and orderly. Keep all safety shields/guards, and equipment in place at all times. Notify your Instructor of faulty wiring/equipment, worn or damaged tools, or missing parts. No horseplay is allowed whatsoever. Academic disciplinary measures will be promptly administered to offending person(s). Please help the Instructor to maintain order so that he can be free to use your time for more effective teaching, and less time housekeeping. We all can enjoy the benefits of an effective and conducive learning environment. Remember to use your safety glasses when entering the shop area. Always perform proper Lock-out / Tag-out.
\\
\\ Tools, Equipment, and Clothing
\\ Students shall wear appropriate clothing to perform any work task assigned. Tools and equipment specified for this class and any preliminary class in the curriculum are to be furnished by the student. Failure to dress for work or bring needed equipment may count as an absence. All tools should be properly used and cared for, thus allowing for longevity and safety of both the user and the tool.
\\
\\ Stealing, vandalism, or pilferage will be dealt with severely!! No drugs, tobacco, drinks, or food allowed!
\ Course Evaluations:
\\ Students should complete all performance tasks on time at REQUIRED MASTERY LEVEL. Tasks, projects, and various assignments will be scored based on time; accuracy; neatness; completeness; procedure; skill; detail; motivation and attitude; safety practices; clean up; care of manuals, logbooks, and references; and other grading criteria. No task score shall be recorded until assignment is complete. Complete shall include condition and cleanliness of equipment; clean up of work areas; tool condition and return; all projects, supplies and materials being stored properly. Failure to bring books, notes, notebook, and equipment for a given class will result in a loss of grade for that class period. Unless the instructor specifies otherwise, all homework is due at the beginning of the next class.
\\
\\ Final (Overall) Grade Policy:
\\ The final overall grade will be computed by adding the points earned as follows:
\| \
\ Attendance/Participation \ | \
\
\ 20 pts/session \ | \
\
\ 14 sessions \ | \
\
\ 280 possible \ | \
| \
\ Lab \ | \
\
\ 10 pts/session \ | \
\
\ 14 sessions \ | \
\
\ 140 possible \ | \
| \
\ Homework \ | \
\
\ Avg. of all work \ | \
\
\ 14 sessions \ | \
\
\ 150 possible \ | \
| \
\ Mid-Term Exam \ | \
\ | \\
\ 1 Exam \ | \
\
\ 215 possible \ | \
| \
\ Final Exam \ | \
\ | \\
\ 1 Exam \ | \
\
\ 215 possible \ | \
| \ | \\ | \\ | \\
\ \ | \
\ 1000 Total Possible Points
\\
\\ 930 – 1000 pts = A
\\ 850 - 929 pts = B
\\ 770 - 849 pts = C
\\ 700 - 769 pts = D
\\ 0 - 699pts = F
\\ Students are responsible for getting notes from other students when absent. Lab activities will continue on schedule. There will not be special lab sessions or classes. Missing lab activities may prevent individuals from performing advanced lab exercises for safety and expense reasons.
\\
\\
\ Attendance in class and lab participation is regarded as a requirement and an obligation for learning. Student is responsible for clocking-in and clocking-out with the provided system, just as they would at work. Failure to clock-in or clock-out will result in loss of points for that session. The Instructor will adjust system for classes that vary from schedule. All attendance points will come from time sheet. Tampering with the time system will result in the loss of all attendance points for that student. Attendance to the end of the last hour block or until instructor releases class is required in order to receive any of the points. Failure to bring required equipment will result in a loss of all points for the class period.
\ This class calendar is subject to change at any time as deemed necessary by the instructor. Factors such as outdoor temperatures and conditions may result in discussions and labs being delayed, rescheduled, or canceled. Student comprehension and rate of skill development may also throw the calendar schedule off.
\\ Session 1 Meet and greet. Go over the syllabus. Start with general discussion and terms.
\\ Session 2 Discuss compressors. Construction, performance, and failures. Lab. Chapter 4.
\\ Session 3 Continuation of compressor and lab.
\\ Session 4 Discuss evaporators. Types, pressures, service, and repair. Lab
\\ Session 5 Continuation of evaporators and labs. Handouts.
\\ Session 6 Condensers, metering devices, and head pressure control. Lab
\\ Session 7 Discuss accessories to systems. Mid term review.
\\ Session 8 Mid-term exam.
\\ Session 9 Electrical circuits. Lab.
\\ Session 10 Electrical troubleshooting, low voltage.
\\ Session 11 Electrical troubleshooting, high voltage.
\\ Session 12 Refrigeration circuit. Lab.
\\ Session 13 Troubleshooting refrigeration circuit. Diagnosis and repair.
\\ Session 14 Pump downs, recovery, and charging. Labs
\\ Session 15 Finish all labs. Final review.
\\ Session 16 Final Exam
\
\\ CLASSROOM AND LAB CONDUCT POLICY
\\
\\
\\ The number one thing to remember in my class is respect each other.
\\
\\ I try to keep a loose, laid-back attitude in my classes with plenty of open discussion during and after lectures. If any one becomes too disruptive, they will be asked to leave the class and to meet with me after class for a private discussion. Failure to follow the conduct policy will result in grade reduction or other disciplinary action.
\\
\\ Rules
\\ 1. No chewing tobacco, snuff, dip, sun flower seeds or anything else that requires the use of a spit cup.
\\ 2. In the class room you may bring in drinks; however, if any cups, empty bottles, glasses, and etc... are left for me or the janitorial staff to pick up, this privilege will be rescinded.
\\ 3. No horse play will be tolerated in either the class or labs.
\\ 4. Do not interrupt when someone is talking to me or visa-versa. If you want to make a comment in a discussion, wait for a pause in the action or raise your hand and I will call on you.
\\ 5. During my lecture, if you missed something or did not understand something, you may interrupt me for clarification.
\\ 6. When walking in the halls during breaks or when going to the lab, keep your voices very low as there are other classes going on.
\\ 7. If you smoke, you must wait until a break and then go outside the building. DO NOT THROW YOUR BUTTS ON THE GROUND.
\\ 8. Cell phones will be turned off or silenced. Cell phone calculators will not be allowed during any testing. If it becomes necessary, you will have two options: surrender your phone to me during class or leave the class for the day.
\\ 9. In the labs do not touch any project or equipment unless you are instructed to. You could ruin someone’s project or get into something that will get you hurt.
\\ 10. During labs, you will stay with your own project station and leave everyone else alone unless you are invited or instructed to assist someone else.
\\ 11. Do not wonder the halls during lab. If you do without permission you will be warned then if necessary asked to leave for the day.
\\ 12. Any and all safety procedures that I instruct will be adhered to.
\\ 13. BE ON TIME! & DON’T LEAVE EARLY WITHOUT CHECKING WITH ME.
\\ 14. The required text book for this course will be brought to every class beginning no later than the third session. Failure to bring book will result in 5 pts reduction of daily grade.
\\ 15. Required tools will be available at all lab sessions. If you don’t bring your tools, you may be asked to leave and points will be deducted for the day’s lab session.
11/30/-1 12:00 AM
11/30/-1 12:00 AM