Wood, Fabric and Finishes Syllabus for 2015-2016
Return to Syllabus List

Instructor Information

Course Information

Recording Policy

Disability Statement

Any student who, because of a disabling condition, may require some special arrangements in order to meet course requirements should contact disAbility Services (Student Service Center room 119, phone 371-5436) as soon as possible.

Statement for Mental Health and Advocacy & Resource Center:

As a student you may experience a range of issues that can cause barriers to learning, such as strained relationships, increased anxiety, alcohol/drug problems, feeling down, difficulty concentrating and/or lack of motivation. These mental health concerns or stressful events may lead to diminished academic performance or reduce a student's ability to participate in daily activities. Amarillo College offers services to assist you with addressing these and other concerns you may be experiencing. If you or someone you know are suffering from any of the aforementioned conditions, you can learn more about the broad range of confidential mental health services available on campus by calling the AC Counseling Center at 806-371-5900. The AC Counseling Center website is https://www.actx.edu/counseling/ . Also, if you are in need of social services (affordable housing, utilities, transportation, food, clothing, childcare, medical/dental/vision, legal), please call the AC Advocacy & Resource Center at 806-371-5439. The AC Advocacy & Resource Center website is https://www.actx.edu/arc

Amarillo College Tutoring for Success Policy:

Administrative Drop Policy

N/A

Student Withdrawal Procedures

N/A

Privacy Statement

The Amarillo College Privacy Policy is found at https://www.actx.edu/-amarillo-college-privacy-notice , and applies to all Amarillo College students.  If you have questions about this privacy statement or you believe that your personal information has been released without your consent, send email to humanresources@actx.edu .

Course

AERM-1241-001 Wood, Fabric and Finishes

Prerequisites

Course Description

A course in the use and care of various covering materials, finishes and wood structures including approved methods and procedures. Safety also addressed.

Student Resources Student Resources Website

Department Expectations

\N

Occupational License Disclaimer

Hours

(2 sem hrs; 1 lec, 2 lab)

Class Type

On Campus Course

Syllabus Information

Textbooks

Student References-   Texts, reference books, or other references the student will be expected to use:

\ \

1.  Dictionary of Aeronautical Terms, 5^th edition, 2013, paperback;(ASA-DAT-5);      ISBN-13:978-1560278641

\ \

2.  Aviation Mechanics Handbook: The Aviation Standard, 6th  Edition, (ASA-MHB-5); ISBN 13:978-1560278986

\ \

3.  FAR/AMT 2014: Federal Aviation Regulations for Aviation Maintenance Technicians; 2014 edition, 2013, paperback;                                             ISBN-13:978-1560279983

\ \

4.  AC - 43.13 1B/2B - Acceptable Methods, Techniques and Practices of Aircraft Inspection and Repair, 2009, paperback;                                                        ISBN-13:978-0977489695

\ \

5.  A&P Technician Airframe Textbook; 2009, paperback;                                        ISBN 13:978-0884875604

\ \

6.  A&P Technician Airframe Test Guide with Oral & Practical Study Guide, 2009, paperback;                                                                                                         ISBN-13:978-0884875444

\ \

 

Supplies

\ Calculator capable of performing algebra and trigonometry functions.

Student Performance

 

\ \

I.A.1     Service and repair wood structures.    

\ \

I.A.2     Identify wood defects.

\ \

I.A.3     Inspect wood structures.

\ \

I.B.4    Select and apply fabric and fiberglass covering materials.

\ \

I.B.5    Inspect, test, and repair fabric and fiberglass.

\ \

I.C.6    Apply trim, letters, and touch up paint.

\ \

I.C.7    Identify and select aircraft finishing materials.

\ \

I.C.8    Apply finishing materials.

\ \

I.C.9    Inspect finishes and identify defects.

\ \

 

\ \

Items # I.A.1, I.A.2, I.A.3, I.B.4, I.B.5, I.C.6..................................................... Training Level (1)

\ \

Items # I.C.7, I.C.8, I.C.9................................................................................ Training Level (2)

\ \

 

Students Rights and Responsibilities

Student Rights and Responsibilities

Log in using the AC Connect Portal

In order to receive your AC Connect Email, you must log in through AC Connect at https://acconnect.actx.edu .

If you are an active staff or faculty member according to Human Resources, use "Exchange". All other students, use "AC Connect (Google) Email".

Expected Student Behavior

 

1)    No electronic devices, i.e. I-Phone, I-Pad, I-Pod, Blackberry, Droid, MP3, etc., (Laptop with instructor permission only) allowed during class time, break time only. Any violations will result in direct point deductions from students overall grade average. 1^st time 1pt, 2^nd time 5pts, 3^rd time 10pts, 4^th time 20 pts. If you have to be on your cell phone you must exit the classrooms or shop facilities to be on the phone.

2)    No Sleeping or the appearance of sleeping during class. Any violations will result in direct in either point deductions from students overall grade average or make-up time in 1/10 increments for each violation.

3)    No shorts, sandals, or sleeveless shirts allowed in shop area. Shoes must fully cover feet. No worn or shredded clothing allowed due to machines and metal shavings. You will not be allowed to work in shop with any of the above violations.

4)    No food or drink allowed in shop area.

5)    No tobacco products allowed in shop area.

6)    No alcohol or drugs.

7)    Absolutely No Horseplay!!!  Due to the nature of work and in practice of professional work ethic, horseplay will not be tolerated in any form. 

8)    No Profanity!

9)    Safety glasses will be worn at all times in a work area.

10)  Face shields will be worn when operating machinery. (i.e. drill presses, grinders, cut-off tools)

11)  Know where the closest fire extinguisher is located to your work area. Know where the closest exit is to your work area. Know where MSDS material is located. Know where eye wash is located. Know where first aid kit is located.

12)  Inform instructor of any accidents no matter how small.

13)  Do not leave class without informing instructor.

14)  Watch out for others. They may be unaware of a potential hazard.

15)  Amarillo College Technical Education shirts are to be worn at all times; including class, shop / lab or during field trips.

NOTE: Any violations may warrant significant grade reduction. Severity of violation may warrant expulsion from class or complete expulsion from course. Safety is taken seriously at Amarillo College.

 

Grading Criteria

Grading Procedures

\ \

A.  Grade points are assigned according to the performance of a student in each course as dictated by industry as follows:

\ \

A    -     Excellent performance (100 - 90) = 4.00 grade points

\ \

B    -     Above job entry level (89 - 80) = 3.00 grade points

\ \

C    -     Minimum requirement (79 - 70) = 2.00 grade points

\ \

F    -     Below job entry level (69 - 0) = 0 grade points

\ \

B.  Other performance indicators may be assigned in place of grades as follows:

\ \

CR  -        Credit for Transfer, Advance Standing, Testing Out*. 

\ \

   *Testing out must meet the requirement of Federal Aviation Regulation; Part 147.

\ \

I      -     Incomplete

\ \

W    -     Withdrew from Course/Program

\ \

Au   -     No Grade Points or Grade Computed

\ \

S     -     Satisfactory (Continuing Education)

\ \

U     -     Unsatisfactory (Continuing Education)

\ \

NOTE:  A grade of “S” (Satisfactory) can be given on shop projects at Instructor’s discretion.  Final grade determination for course will have a numerical grade given for shop projects.

\ \

 

Attendance

Attendance and Time Polices

\ \

Punctual and regular attendance is a requirement in all classroom, laboratory and shop sessions. Excused absences are: sickness or injury, with a doctor's statement. All other absences are unexcused.

\ \

When a student's lack of attendance results in failure to satisfactorily complete course objectives, the student will be warned in writing that he/she may fail the course unless arrangements are made with the instructor. Time will be made up at the discretion of the instructor based upon their instructional work load. Make up time and material must occur before the final exam. When unexcused absences exceed ten percent of a course, students will receive the grade of "F". 

\ \

Final tests will not be taken until all time (including the time missed during the final test) for the course is made up.

\ \

1.  EXCUSED ABSENCES during a regular exam or quiz will be made up without penalty. Make-up exam or quiz will be taken at the CONVENIENCE of the instructor.

\ \

2.  UNEXCUSED ABSENCES during a regular exam or final exam will result in a maximum possible test grade of 70 percent, when the test is taken. 

\ \

Tardiness

\ \

Time missed by any student arriving in class after attendance is taken will be made up before he/she can take the final test.

\ \

Repeated Tardiness

\ \

A student's tardiness, (3 or more), may result in:

\ \

1.         A written warning against further tardiness from the instructor.

\ \

2.         Being placed on probation for the course.

\ \

3.         Being issued a grade of "F" for the course.

\ \

The instructor may choose to begin class/lecture by securing the classroom door to prevent interruptions by late arriving students. It is in the student's best interest to be in class early.

\ \

If a student arrives late and is "locked out", he/she may rejoin the class at the next scheduled break time. Attendance begins when the student rejoins the class.

\ \

Students are not required to attend class more than eight hours per day.

\ \

Students must meet the 758 hours of instruction required by the F.A.A. in order to receive credit for or certification in the Airframe curriculum

\ \

 

Calendar

Additional Information

\ The following is required:

\

\ Aviation Maintenance Technician Tool List

\

\  

\

\ Note: Tools may be purchased from any source. The school does not endorse or recommend any particular manufacturer. The school only advises the student to purchase quality products for future use in industry after completion of the course.

\

\            Tools needed for General subjects will be set by instructor. All other tool purchases will be completed by the first day of class for that section (Airframe / Powerplant).

\

\  

\ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \

\ \ Qty: \	\ \ Tool Name: \	\ \ Size: \	\ \ Course \
\ \ 1 \	\ \ Socket Set (Rachet, 12pt. Shallow, 12 pt. Deep, 3” 6” extensions, u-joint) \	\ \ 3/8” Drive \	\ \ Airframe \
\ \ 1 \	\ \ Socket Set (Rachet, 12pt. Shallow, 12 pt. Deep, 3” 6” extensions, u-joint) \	\ \ 1/4" Drive \	\ \ Airframe \
\ \ 1 \	\ \ Combination Wrench Set (12 pt.) \	\ \ 1/4” – 1” \	\ \ Gen. \
\ \ 1 \	\ \ Flat File Single Cut \	\ \ 8-10” \	\ \ Gen. \
\ \ 1 \	\ \ Round File Double Cut \	\ \ 8-10” \	\ \ Airframe \
\ \ 1 \	\ \ Half Round File Double Cut \	\ \ 8-10” \	\ \ Airframe \
\ \ 1 \	\ \ File Handle \	\ \ Adjustable \	\ \ Gen. \
\ \ 1 \	\ \ File card \	\ \ N/A \	\ \ Gen. \
\ \ 3 \	\ \ Drill Bits \	\ \ #40 \	\ \ Airframe \
\ \ 3 \	\ \ Drill Bits \	\ \ #30 \	\ \ Airframe \
\ \ 3 \	\ \ Drill Bits \	\ \ #21 \	\ \ Airframe \
\ \ 1 \	\ \ Drill Bits \	\ \ #11 \	\ \ Airframe \
\ \ 1 \	\ \ Drill Bits \	\ \ 1/4" \	\ \ Airframe \
\ \ 1 \	\ \ Pin Punch \	\ \ 3/32” \	\ \ Airframe \
\ \ 1 \	\ \ Pin Punch \	\ \ 1/8” \	\ \ Airframe \
\ \ 1 \	\ \ Pin Punch \	\ \ 5/32” \	\ \ Airframe \
\ \ 1 \	\ \ Pin Punch \	\ \ 3/16” \	\ \ Airframe \
\ \ 1 \	\ \ Chisel \	\ \ 1/4" \	\ \ Airframe \
\ \ 1 \	\ \ Chisel \	\ \ 3/8” \	\ \ Airframe \
\ \ 1 \	\ \ Center Punch \	\ \ N/A \	\ \ Gen. \
\ \ 1 \	\ \ Automatic Center Punch \	\ \ N/A \	\ \ Airframe \
\ \ 1 \	\ \ Hack Saw W/Blade \	\ \ Adjustable \	\ \ Gen. \
\ \ 1 \	\ \ Ball Peen Hammer \	\ \ 12 oz. \	\ \ Gen. \
\ \ 1 \	\ \ Plastic Tip Hammer \	\ \ 12 oz. \	\ \ Airframe \
\ \ 1 \	\ \ Right Cut Aviation Snips \	\ \ N/A \	\ \ Airframe \
\ \ 1 \	\ \ Left Cut Aviation Snips \	\ \ N/A \	\ \ Airframe \
\ \ 1 \	\ \ Center Cut Aviation Snips \	\ \ N/A \	\ \ Airframe \
\ \ 1 \	\ \ Slip Joint Pliers \	\ \ 6” \	\ \ Airframe \
\ \ 1 \	\ \ Side Cut / Diagonal Pliers \	\ \ 6” \	\ \ Gen. \
\ \ 1 \	\ \ Needle nose Pliers \	\ \ 6” \	\ \ Airframe \
\ \ 1 \	\ \ Duck Bill Pliers \	\ \ 6” \	\ \ Gen. \
\ \ 1 \	\ \ Tongue and Groove Pliers \	\ \ 8” \	\ \ Airframe \
\ \ 1 \	\ \ Needle Nose Vise Grip \	\ \ 6” \	\ \ Airframe \
\ \ 1 \	\ \ Standard Vise Grip \	\ \ 6” \	\ \ Airframe \
\ \ 1 \	\ \ Snap Ring Pliers (Combination in/out-side) \	\ \ N/A \	\ \ Airframe \
\ \ 1 \	\ \ Flat Bade Screw Driver \	\ \ 1/8” X 3” \	\ \ Airframe \
\ \ 1 \	\ \ Flat Bade Screw Driver \	\ \ 1/4" X 2” \	\ \ Airframe \
\ \ 1 \	\ \ Flat Bade Screw Driver \	\ \ 1/4" X 4” \	\ \ Gen. \
\ \ 1 \	\ \ Flat Bade Screw Driver \	\ \ 1/4" X 6” \	\ \ Airframe \
\ \ 1 \	\ \ Phillips Screw Driver \	\ \ #0 X 3” \	\ \ Airframe \
\ \ 1 \	\ \ Phillips Screw Driver \	\ \ #1 X 4” \	\ \ Airframe \
\ \ 1 \	\ \ Phillips Screw Driver \	\ \ #2 X 2” \	\ \ Airframe \
\ \ 1 \	\ \ Phillips Screw Driver \	\ \ #2 X 4” \	\ \ Gen. \
\ \ 1 \	\ \ Allen Wrench Set   \	\ \ .05-1/4” \	\ \ Gen. \
\ \ 1 \	\ \ Deep Aviation Spark Plug Socket \	\ \ 1/2" Dr. X 7/8” \	\ \ Pwrplt. \
\ \ 1 \	\ \ Socket Adaptor \	\ \ 3/8” Dr. F X 1/2" Dr. M \	\ \ Pwrplt. \
\ \ 1 \	\ \ Combination Square \	\ \ 12” \	\ \ Gen. \
\ \ 1 \	\ \ Protractor \	\ \ N/A \	\ \ Gen. \
\ \ 1 \	\ \ Feeler Gauge (offset) \	\ \ To .035” \	\ \ Gen. \
\ \ 1 \	\ \ Scribe \	\ \ 6” \	\ \ Gen. \
\ \ 1 \	\ \ Measuring Tape \	\ \ 12’ \	\ \ Gen. \
\ \ 1 \	\ \ Dividers \	\ \ 6” \	\ \ Airframe \
\ \ 1 \	\ \ Steel Rule \	\ \ 6” in 64ths / 100ths \	\ \ Gen. \
\ \ 1 \	\ \ Mechanical Fingers \	\ \ N/A \	\ \ Airframe \
\ \ 1 \	\ \ Magnetic Pick-up Tool \	\ \ N/A \	\ \ Airframe \
\ \ 1 \	\ \ Inspection Mirror \	\ \ N/A \	\ \ Airframe \
\ \ 1 \	\ \ Sealed Beam Flashlight \	\ \ N/A \	\ \ Airframe \
\ \ 1 \	\ \ Multi-meter (W / Continuity & Temp. Probe) \	\ \ N/A \	\ \ Gen. \
\ \ 1 \	\ \ Tool Box (W / Drawers) Roll Away Pref. \	\ \ N/A \	\ \ Gen. \
\ \ 1 \	\ \ Leather Gloves (Utility) \	\ \ As needed \	\ \ Airframe \
\ \ 1 \	\ \ Welding Goggles \	\ \ As needed \	\ \ Airframe \
\ \ 1 \	\ \ ANSI Approved Safety Glasses \	\ \ As needed \	\ \ Gen. \
\ \ 1 \	\ \ Air Nozzle \	\ \ N/A \	\ \ Airframe \
\ \ 1 \	\ \ Protractor \	\ \ 180º \	\ \ Gen. \
\ \ 1 \	\ \ Compass \	\ \ leaded \	\ \ Gen. \
\ \ 1 \	\ \ Dial Calipers \	\ \ 6” \	\ \ Gen. \
\ \ 1 \	\ \ Ruler \	\ \ 12” \	\ \ Gen. \
\ \ 1 \	\ \ Calculator (Model TI-30XA) Pref. \	\ \ Batt. Pwr. \	\ \ Gen. \