Introduction to Engineering Syllabus for 2014-2015
Return to Syllabus List

Instructor Information

Course Information

Recording Policy

Disability Statement

Any student who, because of a disabling condition, may require some special arrangements in order to meet course requirements should contact disAbility Services (Student Service Center room 119, phone 371-5436) as soon as possible.

Statement for Mental Health and Advocacy & Resource Center:

As a student you may experience a range of issues that can cause barriers to learning, such as strained relationships, increased anxiety, alcohol/drug problems, feeling down, difficulty concentrating and/or lack of motivation. These mental health concerns or stressful events may lead to diminished academic performance or reduce a student's ability to participate in daily activities. Amarillo College offers services to assist you with addressing these and other concerns you may be experiencing. If you or someone you know are suffering from any of the aforementioned conditions, you can learn more about the broad range of confidential mental health services available on campus by calling the AC Counseling Center at 806-371-5900. The AC Counseling Center website is https://www.actx.edu/counseling/ . Also, if you are in need of social services (affordable housing, utilities, transportation, food, clothing, childcare, medical/dental/vision, legal), please call the AC Advocacy & Resource Center at 806-371-5439. The AC Advocacy & Resource Center website is https://www.actx.edu/arc

Amarillo College Tutoring for Success Policy:

Administrative Drop Policy

N/A

Student Withdrawal Procedures

N/A

Privacy Statement

The Amarillo College Privacy Policy is found at https://www.actx.edu/-amarillo-college-privacy-notice , and applies to all Amarillo College students.  If you have questions about this privacy statement or you believe that your personal information has been released without your consent, send email to humanresources@actx.edu .

Course

ENGR-1371-002 Introduction to Engineering

Prerequisites

Prerequisite: MATH 1414-minimum grade of C

Course Description

This course serves as an introduction to engineering as a discipline and profession. It includes applications of mathematical and scientific principles to the systematic solution of typical engineering problems; the use of computer analysis tools and techniques including Excel; MatLab and MathCAD; discussions of professionalism, contemporary issues and ethics; and experience in team design projects.

Student Resources Student Resources Website

Department Expectations

\N

Occupational License Disclaimer

Hours

(3 sem hrs; 2 lec, 2 lab)

Class Type

On Campus Course

Syllabus Information

Textbooks

Engineering fundamentals

\ \

THINKING LIKE AN ENGINEER: An Active Learning Approach

\ \

By Elizabeth A. Stephan, David R. Bowman, William J. Park, Benjamin L. Sill, Matthew W. Ohland

Supplies

Calculator: TI-83, TI-84
\
\ FLASH DRIVE: A USB compatible flash drive is required for this course.

Student Performance

After completing this course, the student will be able to demonstrate knowledge of the following topics with 70% accuracy as evaluated by the engineering faculty:  

\ \

\
1. Describe the engineering profession and engineering ethics, including professional practice and licensure.
\
2. Use technical communication skills to explain the analysis and results of introductory laboratory exercises in engineering and computer science.
\
3. Explain the engineering analysis and design process.
\
4. Analyze data collected during laboratory exercises designed to expose students to the different engineeering disciplines.
\
5. Describe the inpact engineering has had on the modern world.
\
6. As part of a team, design a simple engineering device, write a design report ande present the design.
\
7. Demonstrate computer literacy.
\

Students Rights and Responsibilities

Student Rights and Responsibilities

Log in using the AC Connect Portal

In order to receive your AC Connect Email, you must log in through AC Connect at https://acconnect.actx.edu .

If you are an active staff or faculty member according to Human Resources, use "Exchange". All other students, use "AC Connect (Google) Email".

Expected Student Behavior

Grading Criteria

The final grades of A (90-100), B (80-89), C (70-79), D (60-69), and F (below 60) will be computed as the average of the earned grades as follows:

\ \

 

\ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \

Homework and Class Quizzes	15%
Learning Activities	10%
Major Exams and Project	60%
Final Exam	15%

\ \

 

\ \

Absence from an exam will incur a zero unless there is prior notification of the instructor with approval granted or there is an emergency that could not be circumvented. Students who miss an exam because of College or business related activities should notify the instructor before the absence occurs.  Make-up exams will be given only under rare, extenuating circumstances and at the discretion of the instructor (after written petition for consideration).

\ \

The project counts the same as a major exam.  It includes a written and oral report.

\ \

As an engineer, you will need to continue lifelong learning throughout your career.  You will attend workshops, tour work sites, interview clients, among other duties.  To support the goal of lifelong learning outside of the classroom, the Engineering Department will arrange for guest speakers and tours to broaden your education.  There will be speakers on the first Wednesday, at noon, of each month (February, March and April) and at least two tours.  You must attend 4 activities and fill out a short report form.  If you cannot attend the activity, you will submit a 3 page, double spaced, 12 point paper (including footnotes) on the topic you missed.  The due date for the paper will be 1 week after the missed activity.  You must notify me one week before each scheduled activity as to whether or not you will be able to attend.

\ \

Handwritten homework shall be presented on engineering (quadrille) paper, in pencil, one side only. If an error is made, erase thoroughly.  Homework with scratched out work will NOT  be accepted.  Each problem should be started on a new page.  Homework presentations shall be as follows:

\ \

\
• In the upper left corner full rectangle box, place the course name, number and section.  ENGR 1371-001
\
• In the far right small square, place the page number: 1/2, 2/2, etc.
\
• In the rectangular box immediately to the left of the page number, place your first and last name.
\
• Explicitly state any assumptions that you make.
\
• Show all significant steps.  It should be clear why each step is taken.
\
• Redraw figures and clearly label as needed with dimensions, labels, and units.
\
• Underline important intermediate results.
\
• Box (not circle) final results.
\
• Review work to be certain all work is neat* and easy to read.
\

\ \

*NOTE: If I can’t read it, I won’t grade it.

\ \

Hand written Homework sets shall be stapled upper left and then folded in half along a line perpendicular to the long dimension. The student’s name, course and section number (ENGR 1371-001), date, and the problems included  shall be placed on the outside sheet with the fold to the left, the holes toward the bottom.

\ \

Janie Smith

\ \

ENGR 1371-001

\ \

1/11/11

\ \

2-4, 6, 9

\ \

Memos, Reports, and other formal Engineering documents done in Word and/or Excel will be, at the descretion of your instructor, either turned in in electronic file form or printed and stapled, but not folded with a cover sheet containing the following information

\ \

Janie Smith

\ \

ENGR 1371-001

\ \

1/11/11

\ \

Assignment title

\ \

Grades will be awarded based on the following formula:

\ \

HW mark = (presentation factor) x (correctness)

\ \

Here the presentation factor is a number between 0 and 1. This means that homework should be both correct (or mostly correct) and well presented to receive a high mark.  For handwritten work be advised that if the quality of presentation is very poor, then the submission may not be marked for correctness.  Neat and legible block letter printing but not cursive, and adherence to the above guidelines is all that is required.

\ \

\
• The Instructor reserves the right to grade any number of problem(s) per assignment.
\
• Collaboration between students is allowed on problem solving; however, EACH STUDENT must hand in an ORIGINAL, COMPLETE, problem set.
\
• NO CREDIT will be given for late homework. Homework is due at the beginning of the class period.  Once lecture has started none will be accepted.  Homework can be submitted early.  Under very rare and exceptional circumstance, as stated earlier, you may submit a written request for consideration of the acceptance of your homework if it is late.
\

\ \

Grading of Tests: In complex problem analyses, such as those used in this course, there are many opportunities for errors. Thus exams will be graded using "partial credit" as it is recognized that  some sections of an individual problem may have been carried out correctly even though the final answer may be incorrect.  Partial credit will only be given if the student work is logically developed, with clear and well marked diagrams, with the appropriate fundamental and auxiliary equations prominently displayed, where the substitutions into the equations are quite clear, and the assumptions used are quite obvious to the grader when grading. That is, it is the student's responsibility to present his/her work so clearly that the grader can quickly ascertain the location and nature of the error(s) and can easily follow the subsequent work through to the now incorrect solution of the problem. Thus, the student's contribution, needed to obtain partial credit, is to be able to clearly lead the grader through the student's thought process on the exam page alone. If this is not quite clear on the work submitted, credit will not be given then nor later. Partial credit is simply not negotiable.

Attendance

You must attend to be allowed the opportunity to take the quizes, pop tests and hear the lectures and homework assignments as described below.

\ \

Expect to have homework assigned each day.  Please note the homework format requirements.   You  are responsible for the requirements. A number of in-class quizzes may be given during lecture periods. These will count as extra homework. Homework and in-class exam grades will comprise 15 % of the course grade.

\ \

Please remember the deadline for dropping a class at Amarillo College during the Spring semester is April 23, 2015.  If you stop attending class and do not officially drop the course by this deadline, and your average is below a 60, you will receive an F for the course.

\ \

Attendance is essential for successful completion of this course.  In order to promote consistent attendance, homework is regularly assigned and in-class quizzes may periodically be given.  Late homework is not accepted and in-class quizzes may not be made up.  Homework may be submitted and exams taken in advance when absences are due to a scheduled event.

\ \ \

Calendar

Additional Information

For your convenience, a tentative schedule is attached. The course is undergoing revision this semester so changes are to be expected as we strive to keep the course content current, relevent, and up to date.

\ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \

Projected Schedule                              Subject to Change
Week 1	Syllabus & Introduction	Week 9	Chap 14
Week 2	Chap1 & 2	Week 10	Chap 15
Week 3	Chap 3,4 & 7	Week 11	Chap 16
Week 4	Presentations	Week 12	Chap 17
Week 5	Chap 7, 8 & 9	Week 13	Chap 18
Week 6	Chap 10	Week 14	Chap 19
Week 7	Chap 11	Week 15	Chap 20
Week 8	Chap 12 & 13	Week 16	Finals

\ \

 

\ \

 

\ \

 

\ \