Introduction to Welding Metallurgy Syllabus for 2015-2016
Return to Syllabus List
Instructor Information
Office Location
Manufacturing Education Center 107KCourse Information
Recording Policy
Disability Statement
Any student who, because of a disabling condition, may require some special arrangements in order to meet course requirements should contact disAbility Services (Student Service Center room 119, phone 371-5436) as soon as possible.
Statement for Mental Health and Advocacy & Resource Center:
As a student you may experience a range of issues that can cause barriers to learning, such as strained relationships, increased anxiety, alcohol/drug problems, feeling down, difficulty concentrating and/or lack of motivation. These mental health concerns or stressful events may lead to diminished academic performance or reduce a student's ability to participate in daily activities. Amarillo College offers services to assist you with addressing these and other concerns you may be experiencing. If you or someone you know are suffering from any of the aforementioned conditions, you can learn more about the broad range of confidential mental health services available on campus by calling the AC Counseling Center at 806-371-5900. The AC Counseling Center website is https://www.actx.edu/counseling/ . Also, if you are in need of social services (affordable housing, utilities, transportation, food, clothing, childcare, medical/dental/vision, legal), please call the AC Advocacy & Resource Center at 806-371-5439. The AC Advocacy & Resource Center website is https://www.actx.edu/arc
Amarillo College Tutoring for Success Policy:
Administrative Drop Policy
N/A
Student Withdrawal Procedures
N/A
Privacy Statement
The Amarillo College Privacy Policy is found at https://www.actx.edu/-amarillo-college-privacy-notice , and applies to all Amarillo College students. If you have questions about this privacy statement or you believe that your personal information has been released without your consent, send email to humanresources@actx.edu .
Course
WLDG-1337-002 Introduction to Welding Metallurgy
Prerequisites
Prerequisites: INMT 1305 and ELPT 1311 - minimum grade of C
Course Description
A study of ferrous and nonferrous metals from the ore to the finished product. Emphasis on metal alloys, heat treating, hard surfacing, welding techniques, forging, foundry processes and mechanical properties of metal including hardness, machinability and ductility.
Student Resources Student Resources Website
Department Expectations
\N
Occupational License Disclaimer
Hours
(3 sem hrs; 2 lec, 2 lab)
Class Type
On Campus Course
Syllabus Information
Textbooks
HANDYMAN~IN~YOUR~POCKET
\
\
Young/Glover
\
\
Published by Sequoia
\
\
ISBN 1-885071-29-9
\
\
\
\
Class Handouts and Website
Supplies
\
- Safety glasses
\
- Scientific Calculator
\
- Tool Kit per department list
\
- Three-ring Notebook
\
- Storage media
\
- Flashlight
\
- Vernier calipers
\
- Tape measure
\
Student Performance
\
- Demonstrate knowledge of materials science and quantum mechanics.
\
- Explain atomic structure and bonding and their affect on material properties.
\
- Understand crystal structure and crystal geometry.
\
- Explain solidification, crystal imperfections and diffusion in solids.
\
- Demonstrate knowledge of mechanical properties of metals and other materials.
\
- Interpret binary phase diagrams, stress strain diagrams, solid solution diagrams, Eutectic diagrams, and Continuous Transformation Curve.
\
- Explain structural and mechanical property alterations caused by plastic deformation, and annealing; solidification phenomena.
\
- Demonstrate knowledge of fatigue and failure analysis.
\
Students Rights and Responsibilities
Student Rights and Responsibilities
Log in using the AC Connect Portal
In order to receive your AC Connect Email, you must log in through AC Connect at https://acconnect.actx.edu .
If you are an active staff or faculty member according to Human Resources, use "Exchange". All other students, use "AC Connect (Google) Email".
Expected Student Behavior
No behavior expectations available
Grading Criteria
Course Evaluations:
Students should complete all performance tasks on time at REQUIRED MASTERY LEVEL. Tasks, projects, and various assignments will be scored based on time; accuracy; neatness; completeness; procedure; skill; detail; motivation and attitude; safety practices; clean up; care of manuals, logbooks, and references; and other grading criteria. No task shall be rated until assignment is complete. Complete shall include condition and cleanliness of equipment; clean up of work areas; tool condition and return; all projects, supplies and materials being stored properly. Failure to bring books, notes, notebook, and equipment for a given class may result in a failing grade for that class period.
Final (Overall) Grade Policy:
The final overall grade will be computed by adding the points earned as follows:
12 Projects 50% of grade
4 Shop Test 40% of grade
1 Final Exam 10% of grade
100.00% - 95.00% = A
94.99% - 86.00% = B
85.99% - 75.00% = C
64.99% - 68.00% =D
67.99% - 0.00% = F
Students are responsible for getting notes from other students when absent. Lab activities will continue on schedule. Individuals will not receive credit for making up activities and there will not be special lab sessions. Some work can be caught up during regular lab times. Missing lab activities may prevent individuals from performing advanced lab exercises for safety and expense reasons.
Attendance:
Attendance in class and lab participation is regarded as a requirement and an obligation for learning. Student is responsible for clocking-in and clocking-out with the provided system, just as they would at work. Failure to clock-in or clock-out will result in loss of points for that session. The Instructor will adjust system for classes that vary from schedule. All attendance points will come from time sheet. Tampering with the time system will result in the loss of all attendance points for that student. Attendance to the end of the last hour block or until instructor releases class is required in order to receive any of the points. Failure to bring required equipment will result in a loss of all points for the class period.
Attendance
Textbook,Workbook,Notebook & Class Equipment
\
\
Students are required to have the specified learning materials and equipment no later than the third class session.The student is required to take notes during lectures, and to turn in a notebook. These notes need to be on three ring bound note book paper for grading prior to the final exam. Articles, accumulated information, and useful reference material that pertain to relative course topics will be counted towards the notebook grade. Notebook should contain syllabus, handouts, formula sheets, tests, assignments, and task list.
\
\
\
\
Safety Policy, PPE and attendance.
\
\
Safety is everyone's job,and it starts before you enter the shop area. A machine shop has rotating machinery,high voltage electrical equipment,hot metal,sharp metal and chemicals,all of which can harm or even kill you.Professionlism is another habit that we must excell at. That is why the rules described below are needed.
\
\
Rule#1. All students are required to have signed the attendance sheet and be setting at table at the start of class.
\
\
Rule#2. No headgear of any type are allowed in classroom, hats or caps may be worn in lab.
\
\
Rule#3. Break time will be set by instructor
\
\
Rule#4. Instructor will set break time for class. When break is over all students must be back at work assignments.
\
\
Rule#5. All students will participate in clean up, instructor will assign duties to each student.
\
\
Rule#6. All students will respect other student and instructors.
\
\
Rule#7. No food or drink in shop.
\
\
Rule#8. If you make a mess you clean it up.
\
\
Rule#9. No tobacco products of any type will be used in classroom or lab.
\
\
Rule#10. Students will have all required tools and classroom materials each day class meets.
\
\
Rule#11. Only Safety glasses' with side shields, that meet or exceed ANSI Z87.1 spec will be allowed.
\
\
Rule#12. Only long pants are allowed.
\
\
Rule#13. Only College approved short sleeved close or long sleeved shirts rolled up past the elbow are allowed in both the classroom and lab.
\
\
\
Rule#14. No open toed shoes are allowed,students should wear work boots or work shoes.
\
\
Rule#15. Hair over shoulder length needs to be secured safely with a hat, cap or hairnet.
\
\
Rule#16. No necklaces, bracelets, dangling earrings, rings or watches are to be worn in shop.
\
\
Rule#17. No horseplay of any type will be tolerated.
\
\
Rule#18. Any vandalism or theft will not be tolerated.
\
\
Rule#19. Any student under the influence of drugs or alcohol.
\
\
Failure to comply with rules #1-#16 will result in the following disciplinary actions.
\
\
First offense. The student will receive a verbal reprimand from instructor and, be withdrawn from the class for that period receiving no grade for that day.
\
\
Second offense. The student will receive a written reprimand from instructor, removed from the class for two class periods reviving no points for either day. Any quizzes or test that occur during those classes cannot be made up and will counted as zero points.
\
\
Third offense. The student will be suspended from the class for the remainder of the semester and receive a FAILING grade for that class.
\
\
Failure to comply with rules #17 thru #19 will result in the student being immediately suspended from the class for the remainder of the semester and receiving a FAILING grade for that class.
\
\
\
\
Tools, Equipment,
\
\
Tools and equipment specified for this class and any recommended preliminary class in the Machining Technology Curriculum are to be furnished by the student and be with the student during all lab activities. failure to have tools will result in the student receiving no lab grade for that class period. All student tools should marked with the students initials for easy identification, these tools should be properly used and cared for, thus allowing for longevity and safety of both the user and the tool.
\
\
\
\
For all other question the below link will take you to Amarillo College Student Rights and Responsibilities
\
\
\
Calendar
Class 1
Discuss Syllabus. Introduce Work Hands and online materials. Tool requirements.What are metals.
Class 2
Non-ferrous metals, their classifications and uses.
Class 3
Ferrous metals, their classifications and uses.
Class 4
Hardness compared to toughness.Shop Test
Class 5
Tensile strength.
Class 6
Machininablity ratings.
Class 7
Work hardening.
Class 8
Stainless Steel.Shop Test
Class 9
Tool steel classifications.
Class 10
Heat-treating and Tempering.
Class 11
Annealing.Shop Test
Class 12
Carburizing.Shop Test
Class 13
Start final lab project.
Class 14
Continue with final lab project Shop Test
Class 15
Performance test
Class 16
Final Exam. No Excused Absences and No Make Up Exams.
Additional Information
No additional information available
Syllabus Created on:
11/30/-1 12:00 AM
Last Edited on:
11/30/-1 12:00 AM
