Automotive Drive Train and Axles Syllabus for 2015-2016
Return to Syllabus List

Instructor Information

Course Information

Recording Policy

Disability Statement

Any student who, because of a disabling condition, may require some special arrangements in order to meet course requirements should contact disAbility Services (Student Service Center room 119, phone 371-5436) as soon as possible.

Statement for Mental Health and Advocacy & Resource Center:

As a student you may experience a range of issues that can cause barriers to learning, such as strained relationships, increased anxiety, alcohol/drug problems, feeling down, difficulty concentrating and/or lack of motivation. These mental health concerns or stressful events may lead to diminished academic performance or reduce a student's ability to participate in daily activities. Amarillo College offers services to assist you with addressing these and other concerns you may be experiencing. If you or someone you know are suffering from any of the aforementioned conditions, you can learn more about the broad range of confidential mental health services available on campus by calling the AC Counseling Center at 806-371-5900. The AC Counseling Center website is https://www.actx.edu/counseling/ . Also, if you are in need of social services (affordable housing, utilities, transportation, food, clothing, childcare, medical/dental/vision, legal), please call the AC Advocacy & Resource Center at 806-371-5439. The AC Advocacy & Resource Center website is https://www.actx.edu/arc

Amarillo College Tutoring for Success Policy:

Administrative Drop Policy

N/A

Student Withdrawal Procedures

N/A

Privacy Statement

The Amarillo College Privacy Policy is found at https://www.actx.edu/-amarillo-college-privacy-notice , and applies to all Amarillo College students.  If you have questions about this privacy statement or you believe that your personal information has been released without your consent, send email to humanresources@actx.edu .

Course

AUMT-2313-001 Automotive Drive Train and Axles

Prerequisites

Prerequisite: AUMT 1305

Course Description

A study of automotive clutches, clutch operation devices, manual transmissions/ transaxles and differentials with emphasis on diagnosis and repair. May be taught with manufacturer specific instructions.

Student Resources Student Resources Website

Department Expectations

\N

Occupational License Disclaimer

Hours

(3 sem hrs; 2 lec, 3 lab)

Class Type

On Campus Course

Syllabus Information

Textbooks

Modern Automotive Technology, Duffy, ISBN#-978-1-6190-370-7

\ \

Modern Automotive Technology Shop Manual, Johanson, ISBN#- 978-1-61960-377-6

Supplies

AC Logo Shirt

Safety Glasses

Non-slip work shoes or boots

¼ Drive socket set          (1/4 to ½) 5 mm to 13 mm

3/8 Drive socket set     

Student Performance

Course Description: A study of automotive clutches, clutch operation devices, manual transmissions/ transaxles, and differentials with emphasis on diagnosis and repair. May be taught with manufacturer specific instructions.  

End-of-Course Outcomes:  Utilize appropriate safety procedures; diagnose and repair drivelines, clutches, manual transmissions/transaxles, and differentials; and service constant velocity joints and universal joints.

Course Objectives:

• Identify and interpret drive train concerns; determine necessary action.
• Research applicable vehicle and service information, fluid type, vehicle service history, service precautions, and technical service bulletins.
• Check fluid condition; check for leaks; determine necessary action.
• Drain and refill manual transmission/transaxle and final drive unit.
• Diagnose clutch noise, binding, slippage, pulsation, and chatter; determine necessary action.
• Inspect clutch pedal linkage, cables, automatic adjuster mechanisms, brackets, bushings, pivots, and springs; perform necessary action.
• Inspect and replace clutch pressure plate assembly, clutch disc, release (throw-out) bearing and linkage, and pilot bearing/bushing (as applicable).
• Bleed clutch hydraulic system.
• Check and adjust clutch master cylinder fluid level; check for leaks.
• Inspect flywheel and ring gear for wear and cracks; determine necessary action.
• Diagnose constant-velocity (CV) joint noise and vibration concerns; determine necessary action.
• Inspect, remove, and replace front wheel drive (FWD) bearings, hubs, and seals.
• Inspect, service, and replace shafts, yokes, boots, and universal/CV joints.
• Check and adjust differential housing fluid level.
• Drain and refill differential housing.
• Inspect and replace drive axle wheel studs.
• Remove and replace drive axle shafts.​

Students Rights and Responsibilities

Student Rights and Responsibilities

Log in using the AC Connect Portal

In order to receive your AC Connect Email, you must log in through AC Connect at https://acconnect.actx.edu .

If you are an active staff or faculty member according to Human Resources, use "Exchange". All other students, use "AC Connect (Google) Email".

Expected Student Behavior

Cell phone or electronic equipment in the classroom or lab should be put on silent and not interfere with the classroom environment.

Grading Criteria

35% Daily Attendance and Participation

15% Homework & Quiz

35% Lab & Test Performance

15% Final

 

A = 89.5-100

B = 79.5-89.4

C = 69.5-79.4

D = 59.5-69.4

F = 0-59.4

Late work will be accepted with a deduction of 30 points no later than three days after due date.

Attendance

You are expected to attend all class meetings on time and stay for the whole class. Points will be deducted from your attendance for not complying.

Calendar

Additional Information

Prerequisites: AUMT-1305

Students are required to comply with the Amarillo College Technical Education Code of Professional Conduct. The Amarillo College Technical Education Code of Professional Conduct will be posted on the bulletin board in the Transportation Career Center and the Academic Classroom Center and will be explained in detail by the Instructor on the first day of class.