Engineering Mechanics I (Statics) Syllabus for 2016-2017
Return to Syllabus List

Instructor Information

Course Information

Recording Policy

Disability Statement

If you have a disability (learning, mental, physical) that affects your ability to participate effectively and have access to any program or service at Amarillo College please contact Disability Services at (806) 345-5639 . Our offices are located in the Student Service Center office 112. More information may be found at www.actx.edu/disability.
Disability Services facilitates access to all programs and services according to the ADA, Americans with Disabilities Act and Section 504 of the Rehabilitation Act, as well as other federal and state laws.

Amarillo College Web Accessibility Policy Statement

Amarillo College is committed to providing equal access to all programs and services, including all working, learning, and service environments that affect equal access for persons with disabilities. This commitment to provide equal access and opportunity for persons with disabilities is in compliance with federal and state law. Amarillo College also strives to provide Electronic and Information Resources (EIR) that are accessible to all authorized users.

If you find you are unable to access material in an accessible format please contact the Disability Services Office at (806) 345-5639 . This office will work in conjunction with other campus resources to address and accommodate your issue in a timely manner.

Statement for Mental Health and Advocacy & Resource Center:

As a student you may experience a range of issues that can cause barriers to learning, such as strained relationships, increased anxiety, alcohol/drug problems, feeling down, difficulty concentrating and/or lack of motivation. These mental health concerns or stressful events may lead to diminished academic performance or reduce a student's ability to participate in daily activities. Amarillo College offers services to assist you with addressing these and other concerns you may be experiencing. If you or someone you know are suffering from any of the aforementioned conditions, you can learn more about the broad range of confidential mental health services available on campus by calling the AC Counseling Center at 806-371-5900. The AC Counseling Center website is https://www.actx.edu/counseling/ . Also, if you are in need of social services (affordable housing, utilities, transportation, food, clothing, childcare, medical/dental/vision, legal), please call the AC Advocacy & Resource Center at 806-371-5439. The AC Advocacy & Resource Center website is https://www.actx.edu/arc

Amarillo College Tutoring for Success Policy:

Administrative Drop Policy

Students who do not attend class on or prior to the census date will be administratively dropped. Effective Fall, 2016

Student Withdrawal Procedures

Students who wish to withdraw from a class must:

• consult with their instructor to obtain a signed academic withdrawal request form to submit to the AskAC department for processing
• consult with the financial aid office if receiving financial aid
• consult with the Veterans Benefit Coordinator if receiving veteran benefits
• consult with their academic advisor to determine how withdrawing may affect their enrollment in future semesters
  • NOTE:  The Texas Education Code stipulates that students attending Texas institutions of higher education for the first time fall 2007 and later may not withdraw from more than six courses during their academic career, including courses from which transfer students have withdrawn at other Texas institutions of higher education. (Senate Bill 1231) Rule 4.10.

Privacy Statement

The Amarillo College Privacy Policy is found at https://www.actx.edu/-amarillo-college-privacy-notice , and applies to all Amarillo College students.  If you have questions about this privacy statement or you believe that your personal information has been released without your consent, send email to humanresources@actx.edu .

Course

ENGR-2301-001 Engineering Mechanics I (Statics)

Prerequisites

Prerequisites: MATH 2413-minimum grade of C
Corequisite: PHYS 2425

Course Description

Basic theory of engineering mechanics, using calculus, involving the description of forces, moments and couples acting on stationary engineering structures; equilibrium in two and three dimensions; free-body diagrams; friction; centroids; centers of gravity; and moments of inertia.

Student Resources Student Resources Website

Department Expectations

Occupational License Disclaimer

Hours

(3 sem hrs; 3 lec)

Class Type

On Campus Course

Syllabus Information

Textbooks

TEXTBOOK (Optional):

Engineering Mechanics. Statics and Dynamics, 14^th edition.

 AUTHORS:

R. C. Hibbeler, Prentice Hall Publishing Company.

 Required for Homework 

Modified Mastering Engineering W/E Text Access CardHibbelerISBN 0133922448Copyright 16Edition 14Binding None

 

Supplies

1. Graphing Calculator

2. Green Engineering Graph paper

Student Performance

After completing this course, the student will be able to demonstrate knowledge of the following topics with 70% accuracy as evaluated by the engineering faculty:  

1. State the fundamental principles used in the study of mechanics.
2. Define magnitude and directions of forces and moments and identify associated scalar and vector products.
3. Draw free body diagrams for two- and three-dimensional force systems.
4. Solve problems using the equations of static equilibrium.
5. Compute the moment of force about a specified point or line.
6. Replace a system of forces by an equivalent simplified system.
7. Analyze the forces and couples acting on a variety of objects.
8. Determine unknown forces and couples acting on objects in equilibrium.
9. Analyze simple trusses using the method of joints or the method of sections.
10. Determine the location of the centroid and the center of mass for a system of discrete particles and for objects of arbitrary shape.
11. Analyze structures with a distributed load.
12. Calculate moments of inertia for lines, areas, and volumes.
13. Apply the parallel axis theorem to compute moments of inertia for composite regions.
14. Solve problems involving equilibrium of rigid bodies subjected to a system of forces and moments that include friction.
15. Solve problems involving dry sliding friction, including problems with wedges and belts.

Students Rights and Responsibilities

Student Rights and Responsibilities

Log in using the AC Connect Portal

In order to receive your AC Connect Email, you must log in through AC Connect at https://acconnect.actx.edu .

If you are an active staff or faculty member according to Human Resources, use "Exchange". All other students, use "AC Connect (Google) Email".

Expected Student Behavior

Students are expected to behave in the classroom in a manner that is supportive of the learning environment. Behaviors that are not supportive include, but are not limited to: tardiness/leaving early; electronic device noises; texting or using electronic devices for non-course related activities during the lecture; talking during the lecture; abusive, offensive, and/or disrespectful language or demeanor toward AC faculty, staff, students, and/or Amarillo College property.

In order to receive credit for a course, all material listed on the syllabus must be covered. The instructor sets the pace to ensure that these requirements are met. Complaining about the pace will not result in less material being covered.

Students who fail to comply with the standards outlined in the syllabus and/or AC’s Student Rights & Responsibilities document will be subject to disciplinary action which may include, but is not limited to: removal from the classroom; consultation with the Math & Engineering Department Chair and/or other AC authority; withdrawal from the course and/or Amarillo College.

Grading Criteria

The final grades of A (90-100), B (80-89), C (70-79), D (60-69), and F (below 60) will be computed as the average of the earned grades as follows:

Online Homework – 8% In Class Homework – 2% Quizzes – 10% Class Project – 10% Learning Activities – 5%
3 Tests – 15% (each) Final – 20 %

 

 

 

Absence from an exam will incur a zero unless there is prior notification of the instructor with approval granted or there is an emergency that could not be circumvented. Students who miss an exam because of College or business related activities should notify the instructor before the absence occurs.  Make-up exams will be given only under rare, extenuating circumstances and at the discretion of the instructor (after written petition for consideration).

The project counts the same as a major exam.  It includes a written report.

As an engineer, you will need to continue lifelong learning throughout your career.  You will attend workshops, tour work sites, interview clients, among other duties.  To support the goal of lifelong learning outside of the classroom, the Engineering Department will arrange for guest speakers and tours to broaden your education.  There will be speakers on the first Wednesday, at noon, of each month and approximately two tours.  As part of your learning activities grade, you must attend 4 of these activities and fill out a short report form. There may be additional opportunities announced throughout the semester that can be used to meet some of the 4 activities requirement, and a report form will similarly be required.

If you cannot attend all four of your required activities, you must submit a three page, double spaced, 12 point font paper on the topic you missed.  The due date for the paper will be 1 week after the missed activity for which you would like to claim credit.  You must notify me one week before each scheduled activity as to whether or not you will be able to attend.

Homework shall be presented on engineering (quadrille) paper, in pencil, one side only. If an error is made, erase thoroughly.  Homework with scratched out work will NOT  be accepted.  Each problem should be started on a new page.  Homework presentations shall be as follows:

• In the upper left corner full rectangle box, place the course name, number and section, i.e. ENGR 2301-001.
• In the far right small square, place the page number: 1/2, 2/2, etc.
• In the rectangular box immediately to the left of the page number, place your first and last name.
• Write the problem number and restate the problem at the top of the page.
• Explicitly state any assumptions that you make.
• Show all significant steps.  It should be clear why each step is taken.
• Write out each equation that you use prior to inserting values.
• Redraw figures and clearly label as needed with dimensions, labels, and units.
• Underline important intermediate results with units indicated when applicable.
• Box (not circle) final results.
• Review work to be certain all work is neat* and easy to read.

*NOTE: If I can’t read it, I won’t grade it.

Homework sets shall be stapled upper left and then folded in half along a line perpendicular to the long dimension. The student’s name, course and section number (ENGR 2301-001), date, and the problems included shall be placed on the outside sheet with the fold to the left, the holes toward the bottom. See the following example:

Jane Smith

ENGR 2301-001

1/11/11

2-4, 6, 9

Grades will be awarded based on the following formula:

HW mark = (correctness) x (presentation factor)

Here the presentation factor is a number between 0 and 1. This means that homework should be both correct (or mostly correct) and well presented to receive a high mark.  Be advised that if the quality of presentation is very poor, then the submission may not be marked for correctness. But don't get out your word processor. Neat and legible printed (not cursive) handwriting and adherence to the above guidelines is all that is required.

• The Instructor reserves the right to grade any number of problem(s) per assignment.
• Collaboration between students is allowed on problem solving; however, EACH STUDENT must hand in an ORIGINAL, COMPLETE, problem set.
• Homework will be collected at the start of class on the day it is due. Homework may be submitted early. NO CREDIT will be given for late homework. Under very rare and exceptional circumstance, as stated earlier, you may submit a written request for consideration of the acceptance of your homework if it is late.

Grading of Tests: In complex problem analyses, such as those used in this course, there are many opportunities for errors. Thus exams will be graded using "partial credit" as it is recognized that some sections of an individual problem may have been carried out correctly even though the final answer may be incorrect.  Partial credit will only be given if the student work is logically developed, with clear and well marked diagrams, with the appropriate fundamental and auxiliary equations prominently displayed, where the substitutions into the equations are quite clear, and the assumptions used are quite obvious to the grader when grading. That is, it is the student's responsibility to present his/her work so clearly that the grader can quickly ascertain the location and nature of the error(s) and can easily follow the subsequent work through to the now incorrect solution of the problem. Thus, the student's contribution, needed to obtain partial credit, is to be able to clearly lead the grader through the student's thought process on the exam page alone. If this is not quite clear on the work submitted, credit will not be given then nor later. Partial credit is simply not negotiable.

Attendance

You must attend to be allowed the opportunity to take the pop quizzes and hear the lectures and homework assignments as described below.

Expect to have homework assigned each day.  Please note the homework format requirements. You are responsible for the requirements. A number of in-class quizzes may be given during lecture periods. These will count as extra homework. Homework and in-class quiz grades will comprise 15% of the course grade.

Please remember the deadline for dropping a class at Amarillo College during the Spring semester is April 21st.  If you stop attending class and do not officially drop the course by this deadline, and your average is below a 60, you will receive an F for the course.

Attendance is essential for successful completion of this course.  In order to promote consistent attendance, homework is regularly assigned and in-class quizzes may periodically be given.  Late homework is not accepted and in-class quizzes may not be made up.  Homework may be submitted and exams taken in advance when absences are due to a scheduled event.

Calendar

Additional Information