Basic Electrical Theory Syllabus for 2016-2017
Return to Syllabus List

Instructor Information

Office Location

Manufacturing Education Center 105E

Office Hours

 

Tuesday: 7:30 AM – 7:45 AM;  5:30 -- 5:50 PM

 

Thursday: 7:30 AM – 7:45 AM;  5:30 -- 5:50 PM

Other times, please call for appointment

Course Information

Recording Policy

Disability Statement

If you have a disability (learning, mental, physical) that affects your ability to participate effectively and have access to any program or service at Amarillo College please contact Disability Services at (806) 345-5639 . Our offices are located in the Student Service Center office 112. More information may be found at www.actx.edu/disability.
Disability Services facilitates access to all programs and services according to the ADA, Americans with Disabilities Act and Section 504 of the Rehabilitation Act, as well as other federal and state laws.

Amarillo College Web Accessibility Policy Statement

Amarillo College is committed to providing equal access to all programs and services, including all working, learning, and service environments that affect equal access for persons with disabilities. This commitment to provide equal access and opportunity for persons with disabilities is in compliance with federal and state law. Amarillo College also strives to provide Electronic and Information Resources (EIR) that are accessible to all authorized users.

If you find you are unable to access material in an accessible format please contact the Disability Services Office at (806) 345-5639 . This office will work in conjunction with other campus resources to address and accommodate your issue in a timely manner.

Statement for Mental Health and Advocacy & Resource Center:

As a student you may experience a range of issues that can cause barriers to learning, such as strained relationships, increased anxiety, alcohol/drug problems, feeling down, difficulty concentrating and/or lack of motivation. These mental health concerns or stressful events may lead to diminished academic performance or reduce a student's ability to participate in daily activities. Amarillo College offers services to assist you with addressing these and other concerns you may be experiencing. If you or someone you know are suffering from any of the aforementioned conditions, you can learn more about the broad range of confidential mental health services available on campus by calling the AC Counseling Center at 806-371-5900. The AC Counseling Center website is https://www.actx.edu/counseling/ . Also, if you are in need of social services (affordable housing, utilities, transportation, food, clothing, childcare, medical/dental/vision, legal), please call the AC Advocacy & Resource Center at 806-371-5439. The AC Advocacy & Resource Center website is https://www.actx.edu/arc

Amarillo College Tutoring for Success Policy:

Administrative Drop Policy

Students who do not attend class on or prior to the census date will be administratively dropped. Effective Fall, 2016

Student Withdrawal Procedures

Students who wish to withdraw from a class must:

  • consult with their instructor to obtain a signed academic withdrawal request form to submit to the AskAC department for processing
  • consult with the financial aid office if receiving financial aid
  • consult with the Veterans Benefit Coordinator if receiving veteran benefits
  • consult with their academic advisor to determine how withdrawing may affect their enrollment in future semesters
    • NOTE:  The Texas Education Code stipulates that students attending Texas institutions of higher education for the first time fall 2007 and later may not withdraw from more than six courses during their academic career, including courses from which transfer students have withdrawn at other Texas institutions of higher education. (Senate Bill 1231) Rule 4.10.

Privacy Statement

The Amarillo College Privacy Policy is found at https://www.actx.edu/-amarillo-college-privacy-notice , and applies to all Amarillo College students.  If you have questions about this privacy statement or you believe that your personal information has been released without your consent, send email to humanresources@actx.edu .

Course

ELPT-1311-003 Basic Electrical Theory

Prerequisites

Prerequisites: MCHN 1343 and ETWR 1302 - minimum grade of C

Course Description

Basic theory and practice of electrical circuits. Includes calculations as applied to alternating and direct current.

Student Resources Student Resources Website

Department Expectations

Occupational License Disclaimer

Hours

(3 sem hrs; 2 lec, 2 lab)

Class Type

On Campus Course

Syllabus Information

Textbooks

Textbooks required for this course:

  Electricity Principles & Applications 8th Edition       Author: Richard J Fowler 

             ISBN #: 978-0-07-337376-8                              Publisher: McGraw Hill

Supplies

Safety glasses                                                                                     

USB flash drive (8GB min)                                                                  

Handyman-in-your-pocket                                                                                

Paper                 

Black or Blue medium point ink pen     

Pencil and eraser                    

TI 36X Pro calculator                                                                         

Tool bag                                                                           

Tape measure    

Flashlight

Batteries

#2 Phillips screwdriver

1/4” Flat tip Screwdriver

Small gage wire strippers

Large gage wire strippers

Side cutters (9”)

Needle nose pliers

Tongue and groove pliers (12”)

Fuse Puller

Magnifying glass

Utility knife

2 pair 18” long jumper wires / clips

2 rolls black vinyl electrical tape (3M 33+)

Brand name and model specifications have been determined and are reflected by Amarillo College Bookstore inventory or items available in specific program kits to be ordered. Student substitutions for determined items conveys performance liability and may jeopardize course completion.

 

Student Performance

Students will distinguish the differences of AC and DC electrical circuits including:

1. Electron theory flow

2. Electrical terms

3. Ohms Law

4. Watt’s Laws

5. Inductive and capacitive circuits

6. Series, parallel, and combination circuits

7. Use an oscilloscope to test circuits, determine frequency, show phase shifts

8. Use multimeters

9. Read and draw basic ladder diagrams

10. Students will be able to distinguish differences between AC and DC electrical circuits

11. Measure and interpret electrical values in circuits with the use of multimeters

12. Calculate ohms, volts, amps, and power of electrical circuits

13. Learn and practice electrical safety

             14. Explain how electricity is produced in magnetic fields

Students Rights and Responsibilities

Student Rights and Responsibilities

Log in using the AC Connect Portal

In order to receive your AC Connect Email, you must log in through AC Connect at https://acconnect.actx.edu .

If you are an active staff or faculty member according to Human Resources, use "Exchange". All other students, use "AC Connect (Google) Email".

Expected Student Behavior

Cell phones and pagers WILL be silenced during scheduled class and lab times.

No tobacco or vapor products in use on AC Property!

Drinks may be allowed during lecture portion of class at the student desks. No food or drinks are allowed in the computer lab desks. No jewelry, shorts, sandals or flip-flops allowed in labs. Absolutely no horse play allowed

Notebook & Class Equipment:

Students are required to take notes and participate in discussions during lectures. NO hats allowed in buildings except where required as required equipment (i.e. welding hats while welding...)

 

Shop Policy:

Read safety handouts provided, use common sense, maintain safe shop practices, keep your Lab clean, and orderly. Keep all safety shields/guards, and equipment in place at all times. Notify your Instructor of faulty wiring/equipment, worn or damaged tools, or missing parts. No horseplay is allowed whatsoever. Academic disciplinary measures will be promptly administered to offending person(s). Please help the Instructor to maintain order so that he can be free to use your time for more effective teaching, and less time housekeeping. We all can enjoy the benefits of an effective and conducive learning environment. Remember to use your safety glasses when entering the shop area. Always perform proper Lock-out / Tag-out.

 

Tools & Equipment:

Failure to bring needed equipment will result in a deduction in your lab and professionalism daily grades. All tools should be properly used and cared for, thus allowing for longevity and safety of both the user and the tool.

 

Stealing, vandalism, or pilferage will be dealt with severely!! No drugs, tobacco, drinks, or food allowed!

 

Amarillo College Technical Education
Code of Professional Conduct

Welcome to the Amarillo College Technical Education Division. We wish you the best in your educational pursuit. It is our responsibility to provide you the education, training, and "hands-on" practice to become a professional in your chosen field in a safe environment. The instruction, equipment, and facilities are provided for your use as outlined by your Administration, Program Coordinator and Faculty. Studying, practicing, and learning are required by you.
As a participating student in Amarillo College Technical Programs, you will be expected to act, perform and train in a professional manner. The following rules and guidelines are to be followed by everyone for your safety and to foster a learning environment.
Attendance:
Unless it is an emergency, we highly recommend you not miss class. Recovery of missed information will be the responsibility of you (the student). Class begins at the scheduled time. If you are not in your seat in class or at the designated location during laboratory exercises, you will be counted tardy. You will be required to show an acceptable understanding of the topic(s) covered during your absence. Check syllabus for your instructor’s policy regarding attendance.
Professional Attire:
Every student will be required to wear an approved AC logo shirt to both class and lab. Shirts must be ordered through your advisor during the registration process. It is recommended that you purchase one shirt for every class in which you are registered.
Pants will be:

  • clean and well maintained
  • no large rips or tears
  • held at the waist (i.e., no sagging)
  • blue jeans or long pants (no sweats/exercise pants)
  • have no hanging chains/loose strings (safety issue)

You are expected to reflect the dignity, pride and respect of an industry professional. As a representative of Amarillo College’s Technical Education Program you shall wear your AC logo shirt while in the classroom and on the training field or in the laboratory.
There will be no caps, hats, bandanas, beanies, or hoods worn in Amarillo College buildings. All are to be removed prior to entry into buildings. Religious or medicinal attire must be discussed with your instructor and/or Department Chair. Lab attire will be determined by your instructor. Please check your syllabus.
Your Personal Protective Equipment (PPE) shall be worn when indicated by the instructor in charge during any training, field, or laboratory exercises. It is your responsibility to keep your equipment clean and in good shape.
Required professional attire and PPE is mandatory for class and laboratory participation.
Tools / Equipment / Books / Supplies / PPE:

You must come to class with the required list of tools/equipment/books/supplies/PPE listed on your syllabus in order to participate and earn credit for the day.
Conduct:
Due to the importance of maintaining a safe atmosphere for the training, disruptive behavior will not be tolerated. All students are expected to be respectful, courteous, attentive and quiet in order to support the learning environment.
Amarillo College Campuses are Smoke Free as of August 1, 2016. Smoking is permitted off of College property.
You will refrain from the use of abusive or slanderous language. There will be no horseplay, fighting, harassment or misconduct by anyone. Any student who uses, has in their possession, or is under the influence of illegal drugs or alcohol on campus or at the training field will immediately be turned over to the campus police for appropriate action. There will be a ZERO tolerance policy and immediate steps taken toward withdrawal from Amarillo College.
Anyone who is caught cheating on an exam or quiz will immediately be excused from class and not allowed to return. This is an Amarillo College rule and will be strictly enforced. This applies to plagiarism as well.
Electronic Devices:
All electronic devices producing audible sounds must be silenced during class and on the laboratory/training field. All visual slides and materials are the property of the College and may be copyright protected, hence no photocopy is allowed.
See the syllabus for your instructor’s policy on this matter.
Grievances:
Any student who feels that there is a conflict with a course instructor should first make every effort to resolve the matter with the instructor. If you are unable to resolve differences, you should seek resolution from the immediate supervisor of the instructor, or course coordinator, or Dean of Technical Education.
NOTE: Compliance with the Amarillo College Technical Education Code of Professional Conduct is mandatory for class participation.

Grading Criteria

Course Evaluations:

Students should complete all performance tasks on time at REQUIRED MASTERY LEVEL. Tasks, projects, and various assignments will be scored based on time; accuracy; neatness; completeness; procedure; skill; detail; motivation and attitude; safety practices; clean up; care of manuals, logbooks, and references; and other grading criteria. No task shall be rated until assignment is complete. Complete shall include condition and cleanliness of equipment; cleanup of work areas; tool condition and return; all projects, supplies and materials being stored properly. Failure to bring books, notes, and equipment for a given class may result in a failing grade for that class period. Unless the instructor specifies otherwise, all homework is due at the beginning of the next class.

The student's numerical course grade will be calculated according to the following:

Professionalism  10%

Homework          20%

Course Exams     30%

Labs                    30%

Final Exam         10% 

The use of phones, tablets, e-readers, or laptops or Windows calculator are not allowed on exams. No windows other than the exam window will be opened during exams. 

I have a zero tolerance for academic dishonesty, each student must do their own work. Failure to do so will result in a failing grade for the course.

You are required to take the final exam to pass this course.

The student's numerical course grade will be converted to a course letter grade according to the following scale:

A = 90 to 100, B = 80 to 89, C = 70 to 79, D = 60 to 69, F = Below 60

Your instructor does not round up automatically, any rounding is dependent upon your professionalism grade and attendance (including arriving on time).

 INSTRUCTOR'S STATEMENT:  As your instructor, I am always willing to discuss your grades with you and explain how your grade was determined.  If a grading error has been made on my part, I am always willing to correct the error.

Attendance

Attendance:

Attendance in class is regarded as a requirement, and obligation for learning. Please remember the deadline for dropping a class at AC 12/07/2016.

If you fail to attend regularly, and do not officially drop the course by that deadline, you will receive an “F” for the course.

Three tardies will count as an absence.

Four absences will result in the student being advised to officially withdraw from the course by the instructor.

Attendance will be taken for lecture and labs, leaving early or missing either will result in a deduction in your daily professionalism and lab grades. The attendance grade is included in the professionalism category.

Students absent during a chapter quiz or exam will be required to contact the instructor to schedule a makeup exam. To be eligible for a makeup exam, students must contact your instructor prior to the scheduled exam time and date. This exam will be scheduled at an alternate time outside of the regularly scheduled class time. The makeup quiz or exam may be in essay format at a time designated by the instructor. There will be no makeup for pop-quizzes or the syllabus quiz.

Late assignments will receive a grade no higher than 75%, no late work accepted after 3 days past due.

It is the responsibility of the student to gain any materials missed in class by their absence(s). In the case a student misses, the material will be found on AC Connect or from your fellow students.

Hands-on labs cannot be duplicated and can not be made up, resulting in a zero for the lab.

Calendar

Basic Electrical Theory

Schedule is Tentative, Subject to Change

 

Module

Topic

Assignment

Lab

Exam

1

Meet and Greet. Syllabus & Safety discussion, Chapter 1: Basic Electrical Concepts, Chapter 15: Instruments & Measurements, & Intro to Electrical Safety.

Read Chapters 1 & 15

Lab 1: Multimeters

 Syllabus Quiz

2

Electrical Safety Discussion / Lecture

Read Chapters 2 & 3;

Lab 2: Safety Audit

Pre-course Test: Basic Math & Electrical Terms (non-grade book test)

3

Chapter 2: Electrical Quantities & Units; Ohm’s Law & Power Formula

Homework 1: Number conversions

Lab 3: Resistance

 Pre-lesson Test: Electrical Quantities & Units (non-grade book test)

4

 Chapter 3: Basic Circuits & Measurements; Resistor Color Codes

Read Chapters 4 & 5; Homework 2: Ohm’s Law & Power Formula; Homework 3: Resistor Color Codes

Lab 4: Resistor Color Codes

Post-lesson Test: Electrical Quantities & Units (non-gradebook test)

5

Chapter 4: Circuit Components

Read Chapter 5    

Lab 5: Meters: switches, LEDs...

Exam 1

6

Chapter 5: Multiple-Load Circuits

 Read Chapter 7; Homework 4: Series Circuit Analysis

Lab 6: Series Circuit Breadboard  Lab 7: Parallel Circuit Breadboard

 

7

Chapter 5 Continued; Chapter 7: Magnetism & Electromagnetism

Read Chapter 8; Homework 5: Parallel Circuit Analysis

Lab 8: Series-Parallel Breadboard

 
  Fall Break October 15 – 23    

8

Chapter 8: AC Current & Voltage

 Read Chapter 9; Homework 6: Combination Circuit Analysis

Lab 9A: Series Circuit Wiring

Lab 9B: Parallel Circuit Wiring

 

9

Chapter 9: Power in AC Circuits, Solenoids & Relays

Read Chapter 10; Homework 7: Waveform Conversions

Lab 10: Electromagnet

 

10

ELI the ICE man; Chapter 10: Capacitance

Read Chapter 11; Homework 8: Capacitance Reactance

Lab 11: Combination Wiring Lab

Exam 2

11

Chapter 11: Inductance

Read Chapters 12 & 13; Homework 9: Inductive Reactance

Lab 12: Wiring Lab

 

12

Chapter 12: Transformers; Chapter 13: R, C, L Circuits

 

Lab 13: Wiring Lab

 

 

13

Chapter 13 Continued

 

Lab 14: Wiring Lab

 

14

Chapter 13 Continued

 

Lab 15: Wiring Lab 16: Wiring Lab

Exam 3

15

Chapter 13 Continued; Final Exam Review

Study, Study, Study

 

Post-course Test: Basic Math & Electrical Terms (non-grade book test)

16

Meet in Computer Lab 110 for Final Exam

 

 

Comprehensive Final Exam

 

Additional Information

Syllabus Created on:

08/17/16 3:06 PM

Last Edited on:

08/19/16 9:56 AM