Shop Practices Syllabus for 2017-2018
Return to Syllabus List

Instructor Information

Instructor

Mark Wheat (Curriculum Vitae)

E-Mail

mark.wheat@actx.edu

Phone

Office Location

ACC Room 102

Office Hours

0700-0730 and 1400-1500 Monday thru Thursday

Course Information

Title IX and Sexual Misconduct Reporting

Recording Policy

Disability Statement

If you have a disability (learning, mental, physical) that affects your ability to participate effectively and have access to any program or service at Amarillo College please contact Disability Services at (806) 345-5639 . Our offices are located in the Student Service Center office 112. More information may be found at www.actx.edu/disability.
Disability Services facilitates access to all programs and services according to the ADA, Americans with Disabilities Act and Section 504 of the Rehabilitation Act, as well as other federal and state laws.

Amarillo College Web Accessibility Policy Statement

Amarillo College is committed to providing equal access to all programs and services, including all working, learning, and service environments that affect equal access for persons with disabilities. This commitment to provide equal access and opportunity for persons with disabilities is in compliance with federal and state law. Amarillo College also strives to provide Electronic and Information Resources (EIR) that are accessible to all authorized users.

If you find you are unable to access material in an accessible format please contact the Disability Services Office at (806) 345-5639 . This office will work in conjunction with other campus resources to address and accommodate your issue in a timely manner.

Statement for Mental Health and Advocacy & Resource Center:

As a student you may experience a range of issues that can cause barriers to learning, such as strained relationships, increased anxiety, alcohol/drug problems, feeling down, difficulty concentrating and/or lack of motivation. These mental health concerns or stressful events may lead to diminished academic performance or reduce a student's ability to participate in daily activities. Amarillo College offers services to assist you with addressing these and other concerns you may be experiencing. If you or someone you know are suffering from any of the aforementioned conditions, you can learn more about the broad range of confidential mental health services available on campus by calling the AC Counseling Center at 806-371-5900. The AC Counseling Center website is https://www.actx.edu/counseling/ . Also, if you are in need of social services (affordable housing, utilities, transportation, food, clothing, childcare, medical/dental/vision, legal), please call the AC Advocacy & Resource Center at 806-371-5439. The AC Advocacy & Resource Center website is https://www.actx.edu/arc

Amarillo College Tutoring for Success Policy:

Administrative Drop Policy

Students who do not attend class on or prior to the census date will be administratively dropped. Effective Fall, 2016

Student Withdrawal Procedures

Students who wish to withdraw from a course must complete all steps indicated on the Academic Withdrawal Request form by the course withdrawal deadline.

NOTE: Students who are attending Texas institutions of higher education, for the first time fall 2007 and later, may not withdraw from more than six courses during their academic career. This withdrawal limitation does not include dual credit or developmental classes (Senate Bill 1231 Rule 4.10.) For more information on Drop and Withdrawal Policies, please visit the Registrar's Office Web site.

Privacy Statement

The Amarillo College Privacy Policy is found at https://www.actx.edu/-amarillo-college-privacy-notice , and applies to all Amarillo College students. If you have questions about this privacy statement or you believe that your personal information has been released without your consent, send email to humanresources@actx.edu .

Course

AERM-1303-001 Shop Practices

Prerequisites

Course Description

An introduction to shop safety, the correct use of hand tools, equipment, and precision measurement, identification of aircraft hardware, and the fabrication of fluid lines and tubing. Emphasis on procedures for testing, heat treating and inspection of aircraft structures.

Student Resources Student Resources Website

Department Expectations

Occupational License Disclaimer

Notice to Students enrolled in an educational program for preparation of issuance of certain occupational licenses:

Students enrolled in an educational program in preparation for obtaining certain occupational licenses are potentially ineligible for such license if the student has been convicted of an offense. For further information, please contact your advisor, the Legal Clinic, or the faculty member in charge of the educational program that you seek to enroll in. The further information you will receive will include notification to you of your right to request a criminal history evaluation letter from the licensing authority in order to clarify your particular situation.

Hours

(3 sem hrs; 2 lec, 4 lab)

Class Type

On Campus Course

Syllabus Information

Textbooks

Student References- Texts, reference books, or other references the student will be expected to use:

1. Dictionary of Aeronautical Terms, As Revised (ASA-DAT-(X))

2. Aviation Mechanics Handbook: The Aviation Standard, As Revised, (ASA-MHB-(X))

3. FAR/AMT 20(XX): Federal Aviation Regulations for Aviation Maintenance Technicians; As Revised

4. AC - 43.13 1B/2B - Acceptable Methods, Techniques and Practices of Aircraft Inspection and Repair

5. A&P Technician General Textbook; Jeppeson - As Revised

6. A&P Technician General Test Guide with Oral & Practical Study Guide, - Jeppeson - As Revised

Supplies

Calculator capable of performing algebra and trigonometry functions.

Student Performance

E.17 Identify and select aircraft hardware and materials.

E.19 Perform precision measurements.

D.13 Fabricate and install rigid and flexible fluid lines and fittings.

E.14 Identify and select appropriate non-destructive testing methods.

E.15 Perform dye penetrant, eddy current, ultrasonic, and magnetic particle inspections.

E.18 Inspect and check welds.

E.16 Perform basic heat testing processes.

G.22 Identify and select cleaning materials.

G.23 Inspect, identify, remove, and treat aircraft corrosion and perform aircraft cleaning.

Items # E.14, E.16.............................................................................................. Teaching Level (1)

Items # E.15........................................................................................................ Teaching Level (2)

Items # D.13, E.17, E.18, E.19, G.22, G.23........................................................ Teaching Level (3)

Students Rights and Responsibilities

Student Rights and Responsibilities

Log in using the AC Connect Portal

In order to receive your AC Connect Email, you must log in through AC Connect at https://acconnect.actx.edu .

If you are an active staff or faculty member according to Human Resources, use "Exchange". All other students, use "AC Connect (Google) Email".

Expected Student Behavior

1) No electronic devices, i.e. I-Phone, I-Pad, I-Pod, Blackberry, Droid, MP3, etc., (Laptop with instructor permission only) allowed during class time, break time only. Any violations will result in direct point deductions from students overall grade average. 1^st time 1pt, 2^nd time 5pts, 3^rd time 10pts, 4^th time 20 pts.

2) No Sleeping or the appearance of sleeping during class. Any violations will result in direct point deductions from students overall grade average.

3) No shorts, sandals, or sleeveless shirts allowed in shop area. Shoes must fully cover feet. No worn or shredded clothing allowed due to machines and metal shavings. You will not be allowed to work in shop with any of the above violations.

4) No food or drink allowed in shop area.

5) No tobacco products allowed in shop area.

6) No alcohol or drugs.

7) Absolutely No Horseplay!!! Due to the nature of work and in practice of professional work ethic, horseplay will not be tolerated in any form.

8) No Profanity!

9) Safety glasses will be worn at all times in a work area.

10) Face shields will be worn when operating machinery. (i.e. drill presses, grinders, cut-off tools)

11) Know where the closest fire extinguisher is located to your work area. Know where the closest exit is to your work area. Know where MSDS material is located. Know where eye wash is located. Know where first aid kit is located.

12) Inform instructor of any accidents no matter how small.

13) Do not leave class without informing instructor.

14) Watch out for others. They may be unaware of a potential hazard.

NOTE: Any violations may warrant significant grade reduction. Severity of violation may warrant expulsion from class or complete expulsion from course. Safety is taken seriously at Amarillo College.

Grading Criteria

A. Grade points are assigned according to the performance of a student in each course as dictated by industry as follows:

A - Excellent performance (100 - 90) = 4.00 grade points

B - Above job entry level (89 - 80) = 3.00 grade points

C - Minimum requirement (79 - 70) = 2.00 grade points

F - Below job entry level (69 - 0) = 0 grade points

B. Other performance indicators may be assigned in place of grades as follows:

CR - Credit for Transfer, Advance Standing, Testing Out.

Testing out must meet the requirement of Federal Aviation Regulation; Part 147.

I - Incomplete

W - Withdrew from Course/Program

Au - No Grade Points or Grade Computed

S - Satisfactory (Continuing Education)

U - Unsatisfactory (Continuing Education)

C. Weighted Grade is calculated as follows:

Theory Average (average of exams and final exam) 1/3 of final grade
Shop Average (average of projects) 1/3 of final grade
Quiz Average (average of quizzes) 1/3 of final grade

D. Testing

Each exam may be retaken only once (including regular and final exams.)
The maximum recorded grade on any exam retake will be 70%.
There will be no retake of failed daily quizzes.
All tests and projects will be completed or made up in the semester in which they occur.

NOTE: Final grade determination for academic courses will have a numerical grade.

Final grade determination for continuing education courses will have a letter grade.

Attendance

Attendance and Time Policies

Punctual and regular attendance is a requirement in all classroom, laboratory and shop sessions. Excused absences are: sickness or injury, with a doctor's statement. All other absences are unexcused.

When a student's lack of attendance results in failure to satisfactorily complete course objectives, the student will be warned in writing that he/she may fail the course unless arrangements are made with the instructor. Time will be made up at the discretion of the instructor based upon their instructional work load. Make up time and material must occur before the final exam. When unexcused absences exceed ten percent of a course, students will receive the grade of "F".

Final tests will not be taken until all time (including the time missed during the final test) for the course is made up.

1. EXCUSED ABSENCES during a regular exam or quiz will be made up without penalty. Make-up exam or quiz will be taken at the CONVENIENCE of the instructor.

2. UNEXCUSED ABSENCES during a regular exam or final exam will result in a maximum possible test grade of 70 percent, when the test is taken.

Tardiness

Time missed by any student arriving in class after attendance is taken will be made up before he/she can take the final test.

Repeated Tardines

A student's tardiness, (3 or more), may result in:

1. A written warning against further tardiness from the instructor.

2. Being placed on probation for the course.

3. Being issued a grade of "F" for the course.

The instructor may choose to begin class/lecture by securing the classroom door to prevent interruptions by late arriving students. It is in the student's best interest to be in class early.

If a student arrives late and is "locked out", he/she may rejoin the class at the next scheduled break time. Attendance begins when the student rejoins the class.

Calendar

Day 1.1 E.17 Project Number 1

Description: Identify and select aircraft hardware and materials.

Performance: Correctly identify aircraft materials and SAE system of identifyuing steel and fasteners.