Introduction to Layout and Fabrication Syllabus for 2021-2022
Return to Syllabus List

Instructor Information

Office Location

MEC 107J

Office Hours

Call for an appointment.

Course Information

COVID-19 Protocols

Recording Policy

Disability Statement

If you have a disability (learning, mental, physical) that affects your ability to participate effectively and have access to any program or service at Amarillo College please contact Disability Services at (806) 345-5639 . Our offices are located in the Student Service Center office 112. More information may be found at www.actx.edu/disability.
Disability Services facilitates access to all programs and services according to the ADA, Americans with Disabilities Act and Section 504 of the Rehabilitation Act, as well as other federal and state laws.

Amarillo College Web Accessibility Policy Statement

Amarillo College is committed to providing equal access to all programs and services, including all working, learning, and service environments that affect equal access for persons with disabilities. This commitment to provide equal access and opportunity for persons with disabilities is in compliance with federal and state law. Amarillo College also strives to provide Electronic and Information Resources (EIR) that are accessible to all authorized users.

If you find you are unable to access material in an accessible format please contact the Disability Services Office at (806) 345-5639 . This office will work in conjunction with other campus resources to address and accommodate your issue in a timely manner.

Statement for Mental Health and Advocacy & Resource Center:

As a student you may experience a range of issues that can cause barriers to learning, such as strained relationships, increased anxiety, alcohol/drug problems, feeling down, difficulty concentrating and/or lack of motivation. These mental health concerns or stressful events may lead to diminished academic performance or reduce a student's ability to participate in daily activities. Amarillo College offers services to assist you with addressing these and other concerns you may be experiencing. If you or someone you know are suffering from any of the aforementioned conditions, you can learn more about the broad range of confidential mental health services available on campus by calling the AC Counseling Center at 806-371-5900. The AC Counseling Center website is https://www.actx.edu/counseling/ . Also, if you are in need of social services (affordable housing, utilities, transportation, food, clothing, childcare, medical/dental/vision, legal), please call the AC Advocacy & Resource Center at 806-371-5439. The AC Advocacy & Resource Center website is https://www.actx.edu/arc

Amarillo College Tutoring for Success Policy:

The Tutoring for Success policy applies to any student whose grade or performance in the course falls below a departmentally determined minimum threshold. In either of those cases, the instructor will direct the student to the appropriate tutoring service, which may be faculty-led, discipline-specific, and/or general. Under this policy, the instructor will follow specific departmental guidelines governing the use, duration, and grade component of the tutoring need.

Administrative Drop Policy

Students who do not attend class on or prior to the census date will be administratively dropped. Effective Fall, 2016

Student Withdrawal Procedures

Students who wish to withdraw from a course must complete all steps indicated on the Academic Withdrawal Request form by the course withdrawal deadline.

NOTE: Students who are attending Texas institutions of higher education, for the first time fall 2007 and later, may not withdraw from more than six courses during their academic career. This withdrawal limitation does not include dual credit or developmental classes (Senate Bill 1231 Rule 4.10.) For more information on Drop and Withdrawal Policies, please visit the Registrar's Office Web site.

Privacy Statement

The Amarillo College Privacy Policy is found at https://www.actx.edu/-amarillo-college-privacy-notice , and applies to all Amarillo College students.  If you have questions about this privacy statement or you believe that your personal information has been released without your consent, send email to humanresources@actx.edu .

Course

WLDG-1317-001 Introduction to Layout and Fabrication

Prerequisites

Course Description

A fundamental course in layout and fabrication related to the welding industry. Major emphasis on structural shapes and use in construction.

Student ResourcesStudent Resources Website

Department Expectations

Occupational License Disclaimer

Notice to Students enrolled in an educational program for preparation of issuance of certain occupational licenses:

Students enrolled in an educational program in preparation for obtaining certain occupational licenses are potentially ineligible for such license if the student has been convicted of an offense. For further information, please contact:

Melodie Graves
Justice Involved Advocate
Student Service Center 117
mgraves24@actx.edu
806-371-5995
Make appointment at https://melodiegraves.youcanbook.me

You can also contact the Legal Clinic, or the faculty member in charge of the educational program that you seek to enroll in. The further information you will receive will include notification to you of your right to request a criminal history evaluation letter from the licensing authority in order to clarify your particular situation.

Hours

(3 sem hrs; 2 lec, 2 lab)

Class Type

On Campus Course

Syllabus Information

Textbooks

No Textbook Required 

Supplies

 2019 Intro to Layout & Fabrication I: Tool List Available in East Campus Bookstore

Triangular Architect Scale

0.7mm Mechanical Pencil w/ extra leads (or 5mm)

10” 30/60 Degree Triangle

8” 45 Degree Triangle

Vinyl Eraser

Drafting Tape or Dots

Drafting Quqlity Compass with beam extension

French Curve set

Left & Right Tin Snips

Scissors

Leather Gloves

Safety Glasses

Heavy long Pants and AMARILLO COLLEGE TECHNICAL EDUCATION EDUCATION UNIFORM SHIRT

 

Student Performance

  1. Understand and apply proper shop safety practices.
  2. Read a steel rule / tape measure accurately.
  3. Understand and apply mathematical formulas for layout and fabrication.
  4. Know and apply geometric construction principles.
  5. Know and be able to lay out orthographic projections.
  6. Use orthographic projections to develop templates for sheet metal components.
  7. Understand the safe use of sheet metal working equipment.
  8. Draw patterns using parallel line construction, radial line construction, and triangulation.
  9. Fabricate sheet metal parts using hand tools and machinery.

Students Rights and Responsibilities

Student Rights and Responsibilities

Log in using the AC Connect Portal

In order to receive your AC Connect Email, you must log in through AC Connect at https://acconnect.actx.edu .

If you are an active staff or faculty member according to Human Resources, use "Exchange". All other students, use "AC Connect (Google) Email".

Expected Student Behavior

Notebook & Class Equipment

Students are recommended to take notes during lectures and should maintain a class notebook containing handouts and reference materials. Students shall furnish personal protective equipment to include safety glasses and have their own personal hand tools similar to those on the department tool list.  Students shall bring paper and pen or pencil to each class meeting.

 

Shop Policy

Read safety handouts provided, use common sense, maintain safe shop practices, keep your Lab clean, and orderly. Keep all safety shields/guards, and equipment in place at all times. Notify your Instructor of faulty wiring/equipment, worn or damaged tools, or missing parts. No horseplay is allowed whatsoever. Academic disciplinary measures will be promptly administered to offending person(s). Please help the Instructor to maintain order so that he can be free to use your time for more effective teaching, and less time housekeeping. We all can enjoy the benefits of an effective and conducive learning environment. Remember to use your safety glasses when entering the shop area.

 

Tools, Equipment, and Clothing

Students shall wear appropriate clothing to perform any work task assigned. Students at all times must wear an approved shirt with the Amarillo College logo during class meetings.  Failure to wear approved shirt will result in an absence for the entire meeting. Tools and equipment specified for this class and any preliminary class in the curriculum are to be furnished by the student. Failure to dress for work or bring needed equipment will count as an absence. All tools should be properly used and cared for, thus allowing for longevity and safety of both the user and the tool.

 

Stealing, vandalism, or pilferage will be dealt with severely!! No drugs, tobacco, drinks, or food allowed!

 

All students are expected to follow the Amarillo College Students Code of Conduct. Any violation of this Code will be dealt with appropriately.

Grading Criteria

Students should complete all projects and performance tests at the REQUIRED PROFESSIONAL LEVEL.  They will be scored on neatness, completeness, procedure, professionalism, attitude, attendance and punctuality, shop cleanup, and SAFETY PRACTICES. 

Daily Attendance/Participation                     20%

Lab Performance                                          40%

Homework                                                     10%

Mid-term Exam                                              15%

Final Exam                                                     15%

Class Total                                                      100%

       >90%----------A

       80-89%-------B

       70-79%-------C

       60 - 69%------D

       < 59%---------F

Attendance

Full attendance and participation in class and lab is regarded as a requirement and an obligation for learning.  Students will be allowed to make up one excused absence with the prior approval of the instructor.  Four absences will result in a failing grade for the semester, this equals 25% of class missed.  Any absences or tardiness need to be emailed to instructor prior to scheduled class meeting for consideration of exemption.

Class will begin promptly at the designated time for class, any student arriving after this time will be counted tardy and lose pts. for the meeting.  Students must return from breaks promptly and on time. Students must be released by the instructor before leaving the class or lab meeting.

Students must legibly sign in and out of class and lab to be counted present.

 

Calendar

                        TENATIVE SCHEDULE

Class 1: Class Orientation, Shop Safety

Class 2: Instruction and practice in basic drafting skills and techniques.

Class 3: Continue with practice in basic drafting skills and techniques.

Class 4: Sheet Metal working tools and machinery------------TEST 1—Basic drafting skills

Class 5: Using Patterns and Cutting sheet metal

Class 6: Using Patterns and Cutting sheet metal  (continued).

Class 7: Parallel Line Development

Class 8: Parallel Line Development (continued).

Class 9: Triangulation--------------------------TEST 2----Patterns and Parallel Line Development

Class 10: Triangulation (continued).

Class 11: Radial Line Development

Class 12: Radial Line Development (continued).

Class 13: Making and Using Patterns--------------------TEST 3---Triangulation and Radial Lines

Class 14: Making and using Patterns (continued).

Class 15: FINAL EXAM----AND----SHOP CLEANUP

 

Additional Information

Syllabus Created on:

11/05/20 5:21 PM

Last Edited on:

10/28/22 12:18 PM