Gas and Electric Heating Syllabus for 2021-2022
Return to Syllabus List

Instructor Information

Instructor

(Curriculum Vitae)

E-Mail

rljohnson@actx.edu

Phone

<p>(806) 335-4263 or 335-4390</p>

Office Location

Manufacturing Education Center 107L

Office Hours

Normal office hours are one hour after morning classes and one hour before evening classes. Outside of these hours, please call and make an appointment.

Course Information

COVID-19 Protocols

Recording Policy

Disability Statement

If you have a disability (learning, mental, physical) that affects your ability to participate effectively and have access to any program or service at Amarillo College please contact Disability Services at (806) 345-5639 . Our offices are located in the Student Service Center office 112. More information may be found at www.actx.edu/disability.
Disability Services facilitates access to all programs and services according to the ADA, Americans with Disabilities Act and Section 504 of the Rehabilitation Act, as well as other federal and state laws.

Amarillo College Web Accessibility Policy Statement

Amarillo College is committed to providing equal access to all programs and services, including all working, learning, and service environments that affect equal access for persons with disabilities. This commitment to provide equal access and opportunity for persons with disabilities is in compliance with federal and state law. Amarillo College also strives to provide Electronic and Information Resources (EIR) that are accessible to all authorized users.

If you find you are unable to access material in an accessible format please contact the Disability Services Office at (806) 345-5639 . This office will work in conjunction with other campus resources to address and accommodate your issue in a timely manner.

Statement for Mental Health and Advocacy & Resource Center:

As a student you may experience a range of issues that can cause barriers to learning, such as strained relationships, increased anxiety, alcohol/drug problems, feeling down, difficulty concentrating and/or lack of motivation. These mental health concerns or stressful events may lead to diminished academic performance or reduce a student's ability to participate in daily activities. Amarillo College offers services to assist you with addressing these and other concerns you may be experiencing. If you or someone you know are suffering from any of the aforementioned conditions, you can learn more about the broad range of confidential mental health services available on campus by calling the AC Counseling Center at 806-371-5900. The AC Counseling Center website is https://www.actx.edu/counseling/ . Also, if you are in need of social services (affordable housing, utilities, transportation, food, clothing, childcare, medical/dental/vision, legal), please call the AC Advocacy & Resource Center at 806-371-5439. The AC Advocacy & Resource Center website is https://www.actx.edu/arc

Amarillo College Tutoring for Success Policy:

The Tutoring for Success policy applies to any student whose grade or performance in the course falls below a departmentally determined minimum threshold. In either of those cases, the instructor will direct the student to the appropriate tutoring service, which may be faculty-led, discipline-specific, and/or general. Under this policy, the instructor will follow specific departmental guidelines governing the use, duration, and grade component of the tutoring need.

Administrative Drop Policy

Students who do not attend class on or prior to the census date will be administratively dropped. Effective Fall, 2016

Student Withdrawal Procedures

Students who wish to withdraw from a course must complete all steps indicated on the Academic Withdrawal Request form by the course withdrawal deadline.

NOTE: Students who are attending Texas institutions of higher education, for the first time fall 2007 and later, may not withdraw from more than six courses during their academic career. This withdrawal limitation does not include dual credit or developmental classes (Senate Bill 1231 Rule 4.10.) For more information on Drop and Withdrawal Policies, please visit the Registrar's Office Web site.

Privacy Statement

The Amarillo College Privacy Policy is found at https://www.actx.edu/-amarillo-college-privacy-notice , and applies to all Amarillo College students.  If you have questions about this privacy statement or you believe that your personal information has been released without your consent, send email to humanresources@actx.edu .

Course

HART-1345-002 Gas and Electric Heating

Prerequisites

Prerequisite: IEIR 1312 - minimum grade of C

Course Description

A study of the procedures and principles used in servicing heating systems including gas-fired furnaces and electric heating systems.

Student ResourcesStudent Resources Website

Department Expectations

Occupational License Disclaimer

Notice to Students enrolled in an educational program for preparation of issuance of certain occupational licenses:

Students enrolled in an educational program in preparation for obtaining certain occupational licenses are potentially ineligible for such license if the student has been convicted of an offense. For further information, please contact:

Melodie Graves
Justice Involved Advocate
Student Service Center 117
mgraves24@actx.edu
806-371-5995
Make appointment at https://melodiegraves.youcanbook.me

You can also contact the Legal Clinic, or the faculty member in charge of the educational program that you seek to enroll in. The further information you will receive will include notification to you of your right to request a criminal history evaluation letter from the licensing authority in order to clarify your particular situation.

Hours

(3 sem hrs; 2 lec, 2 lab)

Class Type

On Campus Course

Syllabus Information

Textbooks

 

HANDYMAN~IN~YOUR~POCKET
Young/Glover
Published by Sequoia
ISBN 1-885071-29-9
 
MODERN REFRIGERATION AND AIR CONDITIONING 20th Edition
Althouse/Turnquist/Bracciano
Published by Goodheart-Wilcox
ISBN #978-1-61960-199-4 

 

Supplies

 

Tool Box/Bag
Fuse Puller
Pliers
Channel Lock Pliers
Needle Nose Pliers
Side Cutter Pliers
Screw Driver Assortment
            1/8” – 3/8” Straight Blade
            #0 - #2 Phillips Tip
Utility Knife
Wire Strippers
Wire Crimpers
Allen Wrench Sets (English & Metric)
Combination Wrench Sets (English & Metric
Nut Drivers (1/4”, 5/16”, 11/32”)
12” Adjustable Wrench
8” Adjustable Wrench
Hammer (Ball Peen or Claw)
Inspection Mirror
Padlock
Vernier Calipers
Flashlight
Roll of Electrical Tape
Roll of Duct Tape
Volt – OHM Meter
Clamp on Amp Meter
Goggles or Safety Glasses
Leather Gloves
Scientific Calculator
Paint Marker (Permanent Marker)
Highlighter
Three-ring Binder
Also recommended: 3/8” – 1” Socket Set
 
HVAC Classes
 
Manifold Gauge Set with Hoses and Safety Valves
Valve Core Tool
Refrigeration Ratchet Wrench
Tubing Cutter
Pocket Thermometer:  0-220°F
Pocket Thermometer:  -40-180°F
or Electronic Pocket Thermometer
Thermocouple Test Adapter
 
 
*Handles and shanks should be insulated when possible
Substitutions and combinations of items are up to individuals
All tools should be marked for identification!
 

 

Student Performance

Course Description: Study of the procedures and principles used in servicing heating systems including gas fired furnaces and electric heating systems.

 

End-of-Course Outcomes:  Identify different types of gas furnaces; identify and discuss component operation of gas furnaces; service and troubleshoot gas furnaces; perform safety inspections on gas and electric heating systems; identify unsafe operation of gas furnaces; identify and discuss component operation of electric heating systems; and service and troubleshoot electric heating systems.

 

 

Students Rights and Responsibilities

Student Rights and Responsibilities

Log in using the AC Connect Portal

In order to receive your AC Connect Email, you must log in through AC Connect at https://acconnect.actx.edu .

If you are an active staff or faculty member according to Human Resources, use "Exchange". All other students, use "AC Connect (Google) Email".

Expected Student Behavior

Amarillo College Technical Education Code of Professional Conduct

 

Amarillo College has the responsibility to provide you with the education, training and "hands on" practice to become a professional in your chosen field.  The instruction, equipment, facilities and apparatus are provided for your use.  Studying, practicing and learning are required by you.

 

As a participating student in Amarillo College Technical Programs, you will be expected to act, perform and train in a professional manner.  The following rules and guidelines are to be followed by everyone.

 

Attendance:

 

Unless it is an emergency, it is highly recommended that you do not miss class. Recovery of missed information will be the responsibility of the student. Class begins at the scheduled time. If you are not in your seat in class or at the designated location during laboratory exercises, you will be counted as tardy. The student will be required to show an acceptable understanding of the topic(s) covered during their absence . Check syllabus for your instructor's policy regarding attendance.

 

Professional Attire:

 

Every student will be required to wear an approved AC logo shirt, tucked in,  to both class and lab. Shirts must be ordered through your advisor during the registration period. It is recommended that each student purchase one shirt for every class in which they are registered.

 

Pants will be:

 

  • clean and well maintained
  • no large rips or tears
  • held at the waist (i.e. no sagging)
  • blue jeans or long pants  (no sweats/exercise pants. No Shorts.)
  • have no hanging chains/loose strings (safety issue)

 

You are expected to reflect the dignity, pride and respectfulness of an industry professional.  As a representative of Amarillo College's Technical Education Program you shall wear your AC logo shirt while in the classroom and on the training field or in the laboratory .

 

There will be no caps, hats, bandanas, beanies, or hoods allowed to be worn in the classroom. Lab attire will be determined by your instructor . Please check your syllabus .

 

Your Personal Protective Equipment (PPE) shall be worn when indicated by the instructor in charge during any training, field, or laboratory exercises .  It is your responsibility to keep your equipment clean and in good shape.

 

Required professional attire is mandatory for class and laboratory participation .

 

 

 

Tools I  Equipment I Books I Supplies I  PPE:

 

You must show up to class with the required list of tools/equipment/books/supplies/PPE listed on your syllabus in order to be allowed to participate and earn credit for the day.

 

Conduct:

 

Due to the importance of maintaining a safe atmosphere in the training field/laboratory environment as well as in the classroom, any disruptive behavior will not be

tolerated . All students are expected to be respectful, courteous, attentive and quiet in order to support the learning environment.

 

There shall be no smoking on campus.

 

Students shall refrain from the use of abusive or slanderous language.  There is to be no horseplay, fighting, harassment or misconduct by anyone . Any student who uses, has in their possession, or is under the influence of illegal drugs or alcohol on campus or at the training field will immediately be turned over to the campus police for appropriate action.  This will be a ZERO tolerance policy with immediate steps taken toward withdrawal from Amarillo College .

 

Anyone who is caught cheating on an exam or quiz will immediately be excused from class and not allowed to return.  This is an Amarillo College rule and will be strictly enforced.  This applies to plagiarism as well.

 

 

 

 

Electronic Devices:

 

All electronic devices which produce audible sounds must be silenced during class and on the laboratory/training field.  All visual slides and materials are the property of the instructor and may be copyright protected, hence no photocopy is allowed.

 

See the syllabus for your instructor's policy on this matter.

 

 

 

 

Grievances:

 

Any student who feels that there is a conflict with a course instructor should first make every effort to resolve that matter with the instructor.  If you are unable to resolve differences then you should seek resolution from the immediate supervisor of the instructor or the course coordinator.

 

 

 

 

NOTE:     Compliance with the Amarillo College Technical Education Code of Professional Conduct is mandatory for class participation.

Notebook & Class Equipment
Students are required to take notes during lectures, and to turn in a notebook for grading prior to the final exam. Articles, accumulated information, and useful reference material that pertain to relative course topics will be counted towards the notebook grade. Notebook should contain handouts, formula sheets, test, assignments, and task list. All items will be graded from the notebook. Student shall furnish a scientific calculator and personal protective equipment to include safety glasses. Student shall have their own personal hand tools similar to those on the department service tool list. Student shall furnish necessary computer media for information transfer. Student shall furnish required text and Handyman Pocket Handbook.
 
Shop Policy
Read safety handouts provided, use common sense, maintain safe shop practices, keep your Lab clean, and orderly. Keep all safety shields/guards, and equipment in place at all times. Notify your Instructor of faulty wiring/equipment, worn or damaged tools, or missing parts. No horseplay is allowed whatsoever. Academic disciplinary measures will be promptly administered to offending person(s). Please help the Instructor to maintain order so that he can be free to use your time for more effective teaching, and less time housekeeping. We all can enjoy the benefits of an effective and conducive learning environment. Remember to use your safety glasses when entering the shop area. Always perform proper Lock-out / Tag-out.
 
Tools, Equipment, and Clothing
Students shall wear appropriate clothing to perform any work task assigned. Tools and equipment specified for this class and any recommended preliminary class in the Nondestructive Testing and Evaluation curriculum are to be furnished by the student. Failure to dress for work or bring needed equipment may count as an absence. All tools should be properly used and cared for, thus allowing for longevity and safety of both the user and the tool.
 
Stealing, vandalism, or pilferage will be dealt with severely!! No drugs, tobacco, drinks, or food allowed!
 
See Additional Information below for more details.

Grading Criteria

 

 
Course Evaluations:
Students should complete all performance tasks on time at REQUIRED MASTERY LEVEL. Tasks, projects, and various assignments will be scored based on time; accuracy; neatness; completeness; procedure; skill; detail; motivation and attitude; safety practices; clean up; care of manuals, logbooks, and references; and other grading criteria. No task shall be rated until assignment is complete. Complete shall include condition and cleanliness of equipment; clean up of work areas; tool condition and return; all projects, supplies and materials being stored properly. Failure to bring books, notes, notebook, and equipment for a given class may result in a failing grade for that class period. Unless the instructor specifies otherwise, all homework is due at the beginning of the next class.
 
Final (Overall) Grade Policy:
The final overall grade will be computed by adding the points earned as follows:
 

 

Attendance/Participation
15 pts/session
16 sessions
240 possible
Lab
Avg. of all labs
16 sessions
200 possible
Homework
Avg. of all work
16 sessions
150 possible
Mid-Term Exam
 
1 Exam
150 possible
Final Exam
 
1 Exam
260 possible
 
 
 
1000 points
1000 Total Possible Points
 
900 – 1000 pts = A
800 -   899 pts = B
700 -   799 pts = C
600 -   699 pts = D
    0 -   599 pts = F

 

Students are responsible for getting notes from other students when absent. Lab activities will continue on schedule. Individuals will not receive credit for making up activities and there will not be special lab sessions. Missing lab activities may prevent individuals from performing advanced lab exercises for safety and expense reasons.
 
See additional Information below for more details.
 

 

Attendance

 

Attendance in class and lab participation is regarded as a requirement and an obligation for learning. Student is responsible for clocking-in and clocking-out with the provided system, just as they would at work. Failure to clock-in or clock-out will result in loss of points for that session. The Instructor will adjust system for classes that vary from schedule. All attendance points will come from time sheet. Tampering with the time system will result in the loss of all attendance points for that student. Attendance to the end of the last hour block or until instructor releases class is required in order to receive any of the points. Failure to bring required equipment will result in a loss of all points for the class period.
 
See Additional Information below for more details.

Calendar

Session 1.       Meet and greet. Go over syllabus. Start with terminology.

Session 2.       Get hand outs of gas properties. Discuss properties.

Session 3.       Continue with gas properties. Start gas piping discussions.

Session 4.       Continue with gas piping.

Session 5.       Lab. Observe basic furnace function, clock gas input and convert to BTUS.

Session 6.       Discuss components of gas furnace and sequence of operation. Observe, monitor, and adjust furnace components.

Session 7.       Continue from session 6. Review for Mid-Term Exam.

Session 8.       Mid-Term Exam. NO EXCUSED ABSENCES and NO MAKE UP EXAMS.

Session 9.       Start electrical schematics for gas and electric heat.

Session 10.      Continue with schematics. Disassemble and reassemble and rewire furnaces.

Session 11.      Electric air handlers. Explain components.

Session 12.      Continue with electric air handlers. Start discussions on heat pumps.

Session 13.      Continue with heat pumps.

Session 14.      Discuss Combustion air and installation of furnaces. Work in lab.

Session 15.      Finish work in labs and review for Final Exam.

Session 16.      Final Exam. NO EXCUSED ABSENCES AND NO MAKE UP EXAMS.

Additional Information

 Student Conduct/Class Rules

I try to keep a friendly, non-hostile environment in the class. I apply all rules and regulations evenly and fairly.

     Attendance

 

  1. Mid-term and Final exam sessions are mandatory. There are no make up exams.
  2. You will clock in and clock out of each session on the computer in room 116. The time clock entries will be the final word on if you attended class or not.
  3. Class starts at 6:00 pm. Tardiness will result in loss of attendance points for any session.
  4. Class ends at 9:50 pm. Leaving early will result in loss of attendance points for any session.
  5. You are responsible for acquiring notes and homework assignments from fellow students when you are absent.
  6. Home work is due at the first of the following session after is has been assigned. If you are absent when the assignment was made, it is still due at the following session.
  7. Failure to turn in homework on time will result in a 20% reduction on the homework when turned in at the following session. A paper that is two sessions late will receive a grade of 0.
  8. There are no mid-term or final exam make up tests.

     Conduct

  1. The main thing to remember is to respect each other. 
  2. Cell phones are to be silenced during class. This applies to in the classroom or in the labs.  Texting, gaming, taking non-emergency calls, and etc is not permitted. Students who choose not to follow this rule will have the option of surrendering their phone to me for the class or leaving the class for the day.
  3. It is permissible to bring in food or drinks. No food or drinks are allowed in the labs or computer labs. If a student does not pick up and properly dispose of food wrappers, cans, and bottles, then the food and drink privilege will be revoked for all students.
  4. No smoking on campus.
  5. No chewing tobacco, dip, snuff, sunflower seeds, or anything else that requires a spit cup.
  6. During class lecture I encourage open discussion; however, when a student asks a direct question to me, I need everyone else to be quite and let me respond. After I have answered the question, anyone wanting to add to or question the answer is welcome to jump in. This fair to all students and will prevent confusion as to what is the proper answer.
  7. Please be considerate of other classes going on in the building and keep your voices down when you are in the hallways during break.
  8. Anyone that causes a disruption will be asked to leave the class.
  9. Bring text book to class every session.
  10. Infractions of any of the above will result in grade reduction for the day and/or disciplinary action. 

 

Syllabus Created on:

08/19/21 1:58 PM

Last Edited on:

08/19/21 1:58 PM