If you have a disability (learning, mental, physical) that affects your ability to participate effectively and have access to any program or service at Amarillo College please contact Disability Services at (806) 345-5639 . Our offices are located in the Student Service Center office 112. More information may be found at www.actx.edu/disability.
Disability Services facilitates access to all programs and services according to the ADA, Americans with Disabilities Act and Section 504 of the Rehabilitation Act, as well as other federal and state laws.
Amarillo College is committed to providing equal access to all programs and services, including all working, learning, and service environments that affect equal access for persons with disabilities. This commitment to provide equal access and opportunity for persons with disabilities is in compliance with federal and state law. Amarillo College also strives to provide Electronic and Information Resources (EIR) that are accessible to all authorized users.
If you find you are unable to access material in an accessible format please contact the Disability Services Office at (806) 345-5639 . This office will work in conjunction with other campus resources to address and accommodate your issue in a timely manner.
As a student you may experience a range of issues that can cause barriers to learning, such as strained relationships, increased anxiety, alcohol/drug problems, feeling down, difficulty concentrating and/or lack of motivation. These mental health concerns or stressful events may lead to diminished academic performance or reduce a student's ability to participate in daily activities. Amarillo College offers services to assist you with addressing these and other concerns you may be experiencing. If you or someone you know are suffering from any of the aforementioned conditions, you can learn more about the broad range of confidential mental health services available on campus by calling the AC Counseling Center at 806-371-5900. The AC Counseling Center website is https://www.actx.edu/counseling/ . Also, if you are in need of social services (affordable housing, utilities, transportation, food, clothing, childcare, medical/dental/vision, legal), please call the AC Advocacy & Resource Center at 806-371-5439. The AC Advocacy & Resource Center website is https://www.actx.edu/arc
The Tutoring for Success policy applies to any student whose grade or performance in the course falls below a departmentally determined minimum threshold. In either of those cases, the instructor will direct the student to the appropriate tutoring service, which may be faculty-led, discipline-specific, and/or general. Under this policy, the instructor will follow specific departmental guidelines governing the use, duration, and grade component of the tutoring need.
Students who do not attend class on or prior to the census date will be administratively dropped. Effective Fall, 2016
Students who wish to withdraw from a course must complete all steps indicated on the Academic Withdrawal Request form by the course withdrawal deadline.
NOTE: Students who are attending Texas institutions of higher education, for the first time fall 2007 and later, may not withdraw from more than six courses during their academic career. This withdrawal limitation does not include dual credit or developmental classes (Senate Bill 1231 Rule 4.10.) For more information on Drop and Withdrawal Policies, please visit the Registrar's Office Web site.
The Amarillo College Privacy Policy is found at https://www.actx.edu/-amarillo-college-privacy-notice , and applies to all Amarillo College students. If you have questions about this privacy statement or you believe that your personal information has been released without your consent, send email to humanresources@actx.edu .
DEMR-1321-001 Power Train I
Prerequisite: AUMT 1305
Fundamental repair and theory of power trains including clutches, transmissions, drive shafts and differentials. Emphasis on inspection and repair.
Student ResourcesStudent Resources Website
Notice to Students enrolled in an educational program for preparation of issuance of certain occupational licenses:
Students enrolled in an educational program in preparation for obtaining certain occupational licenses are potentially ineligible for such license if the student has been convicted of an offense. For further information, please contact:
Melodie Graves
Justice Involved Advocate
Student Service Center 117
mgraves24@actx.edu
806-371-5995
Make appointment at https://melodiegraves.youcanbook.me
You can also contact the Legal Clinic, or the faculty member in charge of the educational program that you seek to enroll in. The further information you will receive will include notification to you of your right to request a criminal history evaluation letter from the licensing authority in order to clarify your particular situation.
(3 sem hrs; 2 lec, 2 lab)
Hybrid
Every student will be required to wear an approved AC logo shirt or a shirt with the company logo that the student works for, to both class and lab. Pants will be respectable and wore properly, waist up around the waist where they belong. Safety glasses are the responsibility of the student and will be worn at all times while in the shop/lab environment. Clean up materials will be supplied as needed. Special tools will be supplied as needed. Safety shoes/boots, with slip resistance soles. Steel toes not required. No regular tennis shoes allowed.
Tools are required to be brought to class by the student. Necessary tools and equipment are provided for in class use for assigned class and lab projects.
Tools are required for student employment during program and before graduation. Tool Purchase Opportunities with discounts at Mac, Snap-on and Western Equipment will be given and encouraged.
Cost for these tools and boxes average $1500.00 - $2000.00. You are responsible for purchasing these tools before graduation.
Required professional and safety attire is mandatory for class and laboratory participation.
| Diesel Tool List | |
| Name of Tool | Cost |
| 1/4 drive tool set with metric and standard sockets | |
| 3/8 drive tool set with metric and standard sockets | $165.99 |
| 1/2 drive tool set with metric and standard sockets | |
| Combination end wrenches 5/16” to 15/16” | $37.00 |
| Combination end wrenches 6mm to 19mm | $37.00 |
| Pliers set | depends on # of pieces |
| Screwdriver set | $25.99 |
| Gasket Scraper | $13.99 |
| Pry bar set | depends on # of pieces |
| Torx set T10-T30 | $14.99 |
| Ball peen hammer set | $19.99 |
| Blow gun | $9.99 |
| Battery cleaning tool | $2.99 |
| 15 pc hex/torx socket brake service kit | $89.99 |
| Digital multimeter- volts, amps, ohms settings | $115.99 |
| Safety Glasses | $3.00 |
| 134a Air conditioning Gauge set with hoses | ?????? |
| Probe type Thermometer 0-150 degree F | $22.99 |
| Small roll around tool box or tool cart that is lockable | $209.99 |
| Total | $769.89 |
| prices are subject to change at anytime | |
End-of-Course Outcomes: Perform visual inspection of components; determine serviceability of components; and disassemble and reassemble power train components
An introduction to heavy duty truck power train systems. The systems are clutches, standard transmissions, drive shaft assemblies, heavy duty truck axles. This will include servicing and repairing of these components.
In order to receive your AC Connect Email, you must log in through AC Connect at https://acconnect.actx.edu .
If you are an active staff or faculty member according to Human Resources, use "Exchange". All other students, use "AC Connect (Google) Email".
Maturity, honesty and respect is required and given.
As a participating student in Amarillo College Technical Programs, you will be expected to act, perform and train in a professional manner.
Compliance with the Amarillo College Technical Education Code of Professional Conduct is mandatory for class participation.
Students must come to class wearing the appropriate AC uniform shirt or a company shirt with company logo that the student works for.
Student MUST wear safety glasses in the shop/lab.
No cell phones are to be in use during class unless requested by instructor.
Students will be respectful of other classes being conducted in the building, respectful of instructor.
Students are expected to dress appropriately (shirts tucked in, no profanity on clothing, pants must be worn in the proper location (around the waist).
No head gear to be worn in building, except in shop, then must be worn appropriately.
No tobacco or e-vape use on campus.
Student will have the text book out following along with lecture and participating in the lecture and class.
|
All assignments will be turned in a timely manner for a grade or the student will receive a failing grade (F). Shop/lab projects grade is at the instructor’s discretion. Homework is due the class day after the test for the chapter(s), or 10 points will be taken off grade of the homework for each class day that it is late. Homework for the last chapter(s) of the course is due day of the last test. All job work sheets are due by the next shop class after the job work sheet was to be done or five points will be taken from the grade for each class day late. Shop write ups are due by the next shop day or five points will be taken off the shop write up for each class day that it is late. Lose of points from being absent; tardiness and leaving early totaling 6 days will result in a failure grade. No matter what the students other grades add up to. Instructor holds the rights to add to the points or take points away, depending on student’s performance. Student following of the Amarillo College Technical Education Code of Professional Conduct will be considered in the final grade.
|
|---|
Class attendance is mandatory and will effect final grade. Learning tricks of the trade will only come from attending lectures and hands on instruction.
Points will be taken off for tardiness and leaving early.
| If a student misses 10% of total class time they get deducted a letter grade | ||
| Students must attend class 75% of scheduled class time or they will be asked dropped from the class or fail | ||
| Students arriving 15 or more minutes late or leave 15 or more minutes early receive a 50% for the day | ||
| All assignments have a Due date and will not be accepted after that date | ||
| Students must wear AC logo work shirt for class |
This schedule is a tentative outline of times and test. These dates are subject to change dependent on speed of individual classes and informational transition to students. If you plan on missing any days of instruction, your instructor must be given this information in writing, or E-Mail. Failure to follow these instructions forfeits the student’s ability to make up work test outside of the instructors permission.
This class will meet on Monday, Tuesday, Wednesday, and Thursday
Module 1 Discuss syllabus and class objectives. Questions and answers. Discuss lab and shop safety and electronic test equipment usage.
Module 2 Chapter 40 Heavy-Duty Cluthes
Module 3 Chapter 41 Servicing Heavy-Duty Cluthes
Module 4 Chapter 42 Basic Gearing Concepts
Module 5 Chapter 43 Standard Transmissions
Module 6 Chapter 44 Sevicing Standard Transmissions
Module 7 Chapter 45 Automated Manual Transmissions
Module 8 Last shop/lab day. All projects, task sheets and lab work should be finished by end of class today.
Module 9 Review for last test and finish any items not yet finished.
Module 10 Final test.
Enrolling in this class will qualify the student for large Snap-on and MAC tool discounts on required tool for class and work. See instructor.
08/22/21 5:37 PM
08/22/21 5:38 PM