Monday through Thursday 6:00 PM – 10pm
If you have a disability (learning, mental, physical) that affects your ability to participate effectively and have access to any program or service at Amarillo College please contact Disability Services at (806) 345-5639 . Our offices are located in the Student Service Center office 112. More information may be found at www.actx.edu/disability.
Disability Services facilitates access to all programs and services according to the ADA, Americans with Disabilities Act and Section 504 of the Rehabilitation Act, as well as other federal and state laws.
Amarillo College is committed to providing equal access to all programs and services, including all working, learning, and service environments that affect equal access for persons with disabilities. This commitment to provide equal access and opportunity for persons with disabilities is in compliance with federal and state law. Amarillo College also strives to provide Electronic and Information Resources (EIR) that are accessible to all authorized users.
If you find you are unable to access material in an accessible format please contact the Disability Services Office at (806) 345-5639 . This office will work in conjunction with other campus resources to address and accommodate your issue in a timely manner.
As a student you may experience a range of issues that can cause barriers to learning, such as strained relationships, increased anxiety, alcohol/drug problems, feeling down, difficulty concentrating and/or lack of motivation. These mental health concerns or stressful events may lead to diminished academic performance or reduce a student's ability to participate in daily activities. Amarillo College offers services to assist you with addressing these and other concerns you may be experiencing. If you or someone you know are suffering from any of the aforementioned conditions, you can learn more about the broad range of confidential mental health services available on campus by calling the AC Counseling Center at 806-371-5900. The AC Counseling Center website is https://www.actx.edu/counseling/ . Also, if you are in need of social services (affordable housing, utilities, transportation, food, clothing, childcare, medical/dental/vision, legal), please call the AC Advocacy & Resource Center at 806-371-5439. The AC Advocacy & Resource Center website is https://www.actx.edu/arc
The Tutoring for Success policy applies to any student whose grade or performance in the course falls below a departmentally determined minimum threshold. In either of those cases, the instructor will direct the student to the appropriate tutoring service, which may be faculty-led, discipline-specific, and/or general. Under this policy, the instructor will follow specific departmental guidelines governing the use, duration, and grade component of the tutoring need.
Students who do not attend class on or prior to the census date will be administratively dropped. Effective Fall, 2016
Students who wish to withdraw from a course must complete all steps indicated on the Academic Withdrawal Request form by the course withdrawal deadline.
NOTE: Students who are attending Texas institutions of higher education, for the first time fall 2007 and later, may not withdraw from more than six courses during their academic career. This withdrawal limitation does not include dual credit or developmental classes (Senate Bill 1231 Rule 4.10.) For more information on Drop and Withdrawal Policies, please visit the Registrar's Office Web site.
The Amarillo College Privacy Policy is found at https://www.actx.edu/-amarillo-college-privacy-notice , and applies to all Amarillo College students. If you have questions about this privacy statement or you believe that your personal information has been released without your consent, send email to humanresources@actx.edu .
WLDG-2372-020 Layout and Fabrication II
Prerequisite: WLDG 1317 with minimum grade of C
An intermediate course in layout and fabrication. Includes design and production of shop layout and fabrication. Emphasis placed on symbols, blueprints, written specification and pattern development.
Student ResourcesStudent Resources Website
Notice to Students enrolled in an educational program for preparation of issuance of certain occupational licenses:
Students enrolled in an educational program in preparation for obtaining certain occupational licenses are potentially ineligible for such license if the student has been convicted of an offense. For further information, please contact:
Melodie Graves
Justice Involved Advocate
Student Service Center 117
mgraves24@actx.edu
806-371-5995
Make appointment at https://melodiegraves.youcanbook.me
You can also contact the Legal Clinic, or the faculty member in charge of the educational program that you seek to enroll in. The further information you will receive will include notification to you of your right to request a criminal history evaluation letter from the licensing authority in order to clarify your particular situation.
(3 sem hrs; 2 lec, 2 lab)
On Campus Course
Textbooks
WELDING SKILLS
5TH EDITION
Authors: BJ Moniz and RT Miller
Publisher: American Technical Publishing Inc.
ISBN: 978-0-8269-3084-2
WELDING SKILLS WORKBOOK
5TH EDITION
Author: Jonathan F. Gosse
Publisher: American Technical Publishing Inc.
ISBN: 978-0-8269-3085-9
THE PIPEFITTERS AND PIPE WELDER’S HANDBOOK
Revised Edition
Author: Thomas W. Frankland
Publisher: Glencoe McGraw-Hill Inc.
ISBN: 0-02-802500-8
SUPPLIES
PPE
Quantity----Item
(4)--AC logo long sleeve shirt
--Jeans, wool pants, coveralls or overalls
(No rips or frays)
--Plain cotton t-shirts
(No designs/imprints or v neck/low cut shirts)
--Leather Boots
(Steel toed preferred)
(1)--Welding cap
(1)--Heavy duty welding Gloves
(1)--Light leather work Gloves
(1)--Leather welding Jacket
(1)--Safety glasses
(1)--Welding Helmet w/ #9 & #10 lens
(Or auto darkening lens)
(8)--Clear cover plates for welding helmet
(1)--Tinted Oxyfuel safety glasses (shade #5)
(1)--Heat shield hand pad
(1)--Grinding face shield
TOOLS
Quantity----Item
(1)---Large tool bag or box
(1)--12oz Ball peen hammer
(4)--4” C-clamps
(1)--Wrenches in sizes 3/4” to 11/8”
(1)--Flat and Half round Files
(1)--Locking pliers
(1)--Slip joint pliers
(1)--Soap stone set
(1)--Metal paint marker
(2)--Combination padlock
(1)--Pipe wrap-around
(1)--12” Combination square (metal straight edge)
(1)--Small flashlight
(1)--Striker and matching flints
(1)--Tape measure (16’ or larger)
(1)--Torch tip cleaner
(1)--Oxyfuel torch set
Oxyfuel torch body
Oxyfuel torch cutting head
Oxyfuel cutting tip size #0 and #00
Oxyfuel welding tip size #0 and #1
Gentec Inline Quick Connectors
(1)--Chipping hammer
(1)--Wire Brush
(1)--4.5” Angle Grinder
(20)--4.5” Grinder Hard rock disks (thick)
(20)--4.5” Grinder flap disks 36 grit
(3)--4.5” Grinder hard rock pipeliner disks (thin)
(4)--4.5” Grinder wire wheel
(1)--Scratch Awl
(1)---Small tool bag
(2)--Black medium point pen
(2)--Mechanical pencil
(1)--vinyl pencil eraser
(1)--Pocket steel rule
(1)--Pocket magnifying glass
(1)--Utility Knife
(1)--Scribe
(1)--1/4” Prick punch
(1)--1/4” Center punch
(1)--Protractor
(1)--Diagonal cutters
(1)--0.7mm drafting pencil w/ extra matching lead
(1)--0.5mm drafting pencil w/ extra matching lead
(1)--0.9mm drafting pencil w/ extra matching lead
(1)--Lead pointer
(1)--Triangular shaped architect scale
(1)--Triangular shaped Engineers scale
(1)--Compass
(Drafting quality with beam extension)
(1)--10” 30/60/90 Triangle
(1)--10” 45/45/90 Triangle
(1)--French curve set
(1)--Scissors
(1)--Large Dividers/Compass
(1)--Drafting tape or dots
(1)--24” T-square
(1)---Three Ring heavy duty binder 3”
(1)--8.5”x11” College ruled paper
(1)--Graph paper (4 square/inch)
(1)--Three ring dividers
Consumable Metal Supplies
3” SCH 40 pipe (6)
E6010 rod (50lbs)
E7018 rod (50lbs)
Layout and Fabrication
In order to receive your AC Connect Email, you must log in through AC Connect at https://acconnect.actx.edu .
If you are an active staff or faculty member according to Human Resources, use "Exchange". All other students, use "AC Connect (Google) Email".
|
Layout and Fabrication Projects/performance
|
50%
|
|
>90%
|
A
|
|
Mid-Term Exam
|
15%
|
|
80-89%
|
B
|
|
|
70-79%
|
C
|
||
|
Attendance/Participation
Final Exam
|
20%
15%
|
|
60-69%
<60%
|
D
F
|
Assigned written material from the textbook appropriate to each day's classroom and shop projects is to be completed prior to class time. Tests 2 and 3 will be over the assigned material.
Attendance and participation in class and lab is regarded as a requirement and an obligation for learning practice oriented disciplines. Students are responsible for participating in an attendance record management system as designated by the instructor. Attendance / participation grade points may also reflect homework; class preparation; punctuality; housekeeping; proper dress; and required equipment, supplies, and text.
Class 1: Class Orientation, shop safety TENATIVE SCHEDULE
Class 2: Instruction and practice in basic drafting skills and techniques
Class 3: Continue with practice in basic drafting skills and techniques
Class 4: Mitered fittings; 2-piece and multi-piece 90 degree ells
Class 5: Continue with Mitered fittings; TEST 1; Basic drafting skills
Class 6: Mitered fittings; Wyes and crosses; 90 degree and odd angles
Class 7: Saddle fittings; concentric, 90 degree and odd angles
Class 8: Continue with Saddle fittings; TEST 2
Class 9: Saddle fittings; eccentric, 90 degree and odd angles
Class 10: Continue with Saddle fittings
Class 11: Concentric and eccentric reducers
Class 12: Orange Peel and blunt head caps
Class 13: Orange peel and blunt head caps; TEST 3
Class 14: Vent hoods and railing intersections
Class 15:Working with factory pipe weld fittings
Class 15: Final Exam
SAFETY IS OUR ONE MOST IMPORTANT CONCERN. NO ONE IS ALLOWED IN ANY SHOP WITHOUT SAFETY GLASSES, AS WELL AS ANY OTHER APPROPRIATE SAFETY GEAR. ALL STUDENTS ARE REQUIRED TO FOLLOW THE AMARILLO COLLEGE TECHNICAL EDUCATION CODE OF PROFESSIONAL CONDUCT. COMPLIANCE WITH THE CODE IS MANDATORY FOR CLASS PARTICIPATION.
10/25/21 5:10 PM
10/25/21 5:10 PM