Basic Machine Shop II Syllabus for 2021-2022
Return to Syllabus List

Instructor Information

Instructor

Robert Gustin (Curriculum Vitae)

E-Mail

rlgustin@actx.edu

Phone

8063354332

Office Location

Manufacturing Education Center 107K

Office Hours

Course Information

COVID-19 Protocols

Recording Policy

Disability Statement

If you have a disability (learning, mental, physical) that affects your ability to participate effectively and have access to any program or service at Amarillo College please contact Disability Services at (806) 345-5639 . Our offices are located in the Student Service Center office 112. More information may be found at www.actx.edu/disability.
Disability Services facilitates access to all programs and services according to the ADA, Americans with Disabilities Act and Section 504 of the Rehabilitation Act, as well as other federal and state laws.

Amarillo College Web Accessibility Policy Statement

Amarillo College is committed to providing equal access to all programs and services, including all working, learning, and service environments that affect equal access for persons with disabilities. This commitment to provide equal access and opportunity for persons with disabilities is in compliance with federal and state law. Amarillo College also strives to provide Electronic and Information Resources (EIR) that are accessible to all authorized users.

If you find you are unable to access material in an accessible format please contact the Disability Services Office at (806) 345-5639 . This office will work in conjunction with other campus resources to address and accommodate your issue in a timely manner.

Statement for Mental Health and Advocacy & Resource Center:

As a student you may experience a range of issues that can cause barriers to learning, such as strained relationships, increased anxiety, alcohol/drug problems, feeling down, difficulty concentrating and/or lack of motivation. These mental health concerns or stressful events may lead to diminished academic performance or reduce a student's ability to participate in daily activities. Amarillo College offers services to assist you with addressing these and other concerns you may be experiencing. If you or someone you know are suffering from any of the aforementioned conditions, you can learn more about the broad range of confidential mental health services available on campus by calling the AC Counseling Center at 806-371-5900. The AC Counseling Center website is https://www.actx.edu/counseling/ . Also, if you are in need of social services (affordable housing, utilities, transportation, food, clothing, childcare, medical/dental/vision, legal), please call the AC Advocacy & Resource Center at 806-371-5439. The AC Advocacy & Resource Center website is https://www.actx.edu/arc

Amarillo College Tutoring for Success Policy:

The Tutoring for Success policy applies to any student whose grade or performance in the course falls below a departmentally determined minimum threshold. In either of those cases, the instructor will direct the student to the appropriate tutoring service, which may be faculty-led, discipline-specific, and/or general. Under this policy, the instructor will follow specific departmental guidelines governing the use, duration, and grade component of the tutoring need.

Administrative Drop Policy

Students who do not attend class on or prior to the census date will be administratively dropped. Effective Fall, 2016

Student Withdrawal Procedures

Students who wish to withdraw from a course must complete all steps indicated on the Academic Withdrawal Request form by the course withdrawal deadline.

NOTE: Students who are attending Texas institutions of higher education, for the first time fall 2007 and later, may not withdraw from more than six courses during their academic career. This withdrawal limitation does not include dual credit or developmental classes (Senate Bill 1231 Rule 4.10.) For more information on Drop and Withdrawal Policies, please visit the Registrar's Office Web site.

Privacy Statement

The Amarillo College Privacy Policy is found at https://www.actx.edu/-amarillo-college-privacy-notice , and applies to all Amarillo College students.  If you have questions about this privacy statement or you believe that your personal information has been released without your consent, send email to humanresources@actx.edu .

Course

MCHN-1341-001 Basic Machine Shop II

Prerequisites

Prerequisite: MCHN 1338 - minimum grade of C

Course Description

A continuation of Basic Machine Shop I.

Student ResourcesStudent Resources Website

Department Expectations

Occupational License Disclaimer

Notice to Students enrolled in an educational program for preparation of issuance of certain occupational licenses:

Students enrolled in an educational program in preparation for obtaining certain occupational licenses are potentially ineligible for such license if the student has been convicted of an offense. For further information, please contact:

Melodie Graves
Justice Involved Advocate
Student Service Center 117
mgraves24@actx.edu
806-371-5995
Make appointment at https://melodiegraves.youcanbook.me

You can also contact the Legal Clinic, or the faculty member in charge of the educational program that you seek to enroll in. The further information you will receive will include notification to you of your right to request a criminal history evaluation letter from the licensing authority in order to clarify your particular situation.

Hours

(3 sem hrs; 2 lec, 2 lab)

Class Type

On Campus Course

Syllabus Information

Textbooks

HANDYMAN~IN~YOUR~POCKET
Young/Glover
Published by Sequoia
ISBN: 1-885071-29-9
 
PRECISION MACHINING TECHNOLOGY, 2nd Ed.
Hoffman/Hopewell/Janes
Published by Delmar/Cengage
ISBN: 13:978-1-2854-4454-3 or 10:12854-4454-X
 
Machinery's Handbook 30th Edition.
Published by Industrial Press.
ISBN 97808311916.
 
New Practical Mathematics for Metal Working Trainees.
Published NTMA (National Tooling and Machining Association.
ISBN 0-910399-05-0
 
Introduction to Geometric Dimensioning and Tolerancing.
Published NTMA (National Tooling and Machining Association)
ISBN 0-910399-18-2

Supplies

Machining Toolkit can be purchased through Amarillo College Bookstore. This kit will contain both tools and materials required for class. If the student chooses to purchase the all of the required tools and materials from another source they may do so at their owns risk. Tool descriptions are listed below.
3/8" Shank Edge Finder.
1" Travel Dial Indicator W/ Magnetic Base.
Mighty Mag Base.
3 pc. Outside Micrometer Set 0"-3".
2 Piece 1.00" x 2.00" x 3.25" AISI-1018 Cold Rolled Steel
2 Piece 2.00" Diameter x 4.50" AISI-1018 Cold Rolled Steel

Student Performance

 The student wil be able to perform basic fundemental machining operations using, basic machine tools, such as lathe, milling machine, drill press, power saw and bench grinder. The student will demonstrate a knowledge of machine tool terminology, theory, math, part layout and bench work using common measuring tools and shop formulas. Students will apply shop safety, housekeeping and preventative maintenance in their daily shop work.


 

Students Rights and Responsibilities

Student Rights and Responsibilities

Log in using the AC Connect Portal

In order to receive your AC Connect Email, you must log in through AC Connect at https://acconnect.actx.edu .

If you are an active staff or faculty member according to Human Resources, use "Exchange". All other students, use "AC Connect (Google) Email".

Expected Student Behavior

Textbook,Workbook,Notebook & Class Equipment

Students are required to have the specified tool-kit for this class, no later than the second class session. Students are required to take notes during class, these notes may be used during test
 
Safety Policy, PPE and attendance.
Safety is everyone's job,and it starts before you enter the shop area. A machine shop has rotating machinery,high voltage electrical equipment,hot metal,sharp metal and chemicals,all of which can harm or even kill you.Professionlism is another habit that all of us must excell at. That is why the rules described below are needed.
Rule#1. All students are required to have signed the attendance sheet and be setting at table at the start of class.
Rule#2. No headgear of any type are allowed in classroom, hats or caps may be worn in lab.
Rule#3. Break time will be set by instructor
Rule#4. Instructor will set break time for class. When break is over all students must be back at work assignments.
Rule#5. All students will participate in clean up.
Rule#6. All students will respect other student and instructors.
Rule#7. No food or drink in shop.
Rule#8. If you make a mess you clean it up.
Rule#9. Only College approved short sleeved or long sleeved shirts rolled up past the elbow are allowed in both the classroom and lab. These shirts must be buttoned and tucked into pants.
Rule#10. Students will have all required tools and classroom materials each day class meets.
Rule#11. No tobacco products of any type will be used in classroom or lab.
Rule#12. Only Safety glasses' with side shields, that meet or exceed ANSI Z87.1 spec will be allowed.
Rule#13. Only long pants are allowed. No baggy pants,pants that allow body parts to be exposed, or torn pants.
Rule#14. Only College approved short sleeved or long sleeved shirts rolled up past the elbow are allowed in both the classroom and lab. These shirts must be buttoned and tucked into pants.
Rule#15. No open toed shoes of any type are allowed either in classroom or on shop floor,students should wear work boots or work shoes.
Rule#16. Hair over shoulder length needs to be secured safely with a hat, cap or hairnet.
Rule#17. No necklaces, bracelets, dangling earrings, rings or watches are to be worn in shop.
Rule#18. No horseplay of any type will be tolerated.
Rule#19. Any vandalism or theft will not be tolerated.
Rule#20. Any student under the influence of drugs or alcohol.
Failure to comply with rules #1-#10 will be entered  as zero on the grading rubric for each offence this may result in the student failing the class.
Failure to comply with rules#11-#17
First offense. The student will receive a written reprimand from instructor and be removed from that class, recieving no points for that day. Any quizzes or test that occur during that class cannot be made up and will counted as zero points.
Second offense. The student will be suspended from the class for the remainder of the semester and receive a FAILING grade for that class.
Failure to comply with rules #18 thru #20 will result in campus police being called to deal with student the student offender will be immediately suspended from the class for the remainder of the semester and receiving a FAILING grade for that class. Depending on severity of offence the student my be suspended from the college.
 
Tools, Equipment,
Tools and equipment specified for this class and any recommended preliminary class in the Machining Technology Curriculum should be purchased through the bookstore, or if you choose you may purchase them yourself. These tools and tooling have been choosen by the instructor for their quality and usefulness in helping the student to complete their required projects, within a set time limit and specified degree of accuracy. Any subsitutions by the students for a tool of lesser quality, is at the students own risk. Failure of a project because of sub-standard tools, or tooling that does not perform is no excuse a will be graded accordingly

 

 
  For all other question the below link will take you to Amarillo College Student Rights and Responsibilities

Grading Criteria

Course Evaluations:

Students will be graded using the below criteria. 
Homework: 25% of Final Grade.
Daily Rubric; 10% of Final Grade.
Weekly Shop Test: 20% of Final Grade.
2 Projects Minimum : 25% of Final Grade
Final Exam 20% of final grade.
 
Final (Overall) Grade Policy:
The final overall grade will use the below percentages.
 
100% to 90% = A
89% to  80%  = B
79% to  70%  = C
69% to 60%   = D     
59% to 0%      = F
Attendance Policy: Being here is a requirement for learning, if you miss a class it is your responsibility to get class notes from your classmates. Labs will continue on at regular pace, and there will be no special lab for mke up work. If you miss class or are late to class you will receive a ZERO for that daily quiz grade.Students missing more than five classes will result in a failing grade for this class.

Classroom and Shop Work.

Machine Operations Textbook Section Questions: Assigned questions are due no later than the beginning of the first class of the next week.

Math Textbook Homework: Each problem is to be completed and due no later than the beginning of the first cl ass of the next week.

Projects: All project will graded by rubric.

Project types: Lathe and Mill Setup. Lathe Tool, Turning Project and Milling Project.

Weekly Shop Test : A Test over machine shop theory and math.

Final Exam: A comprehensive final exam will be administered. Failure to take the final exam, will result in the student receiving a failing grade for the class.

Homework criteria. Homework will be online thru NTMA-U.
 

Attendance

Attendance Policy: Being here is a requirement for learning, if you miss a class it is your responsibility to get class notes from your classmates. Labs will continue on at regular pace, and there will be no special lab for mke up work. If you miss class or are late to class you will receive a ZERO for that daily quiz grade.Students missing more than five classes will result in a failing grade for this class.

Calendar

Class 1 Tentative Schedule.

Review shop safety.

Lecture: Text 5.1.

Lecture: Math.

Homework: Content folder Week 1 Homework.

Lab: Precision tool care and use. Pedestal Grinder Maintenance.

Class 2 Tentative Schedule.

Lecture:

Lecture: Math:

Lab: Work on projects.

Class 3 Tentative Schedule.

Lecture:

Lecture: Math

Lab: Work on projects.

Class 4 Tentative Schedule.

Lecture: 

Lecture: Math.

Lab: Work on projects.

Class 5 Tentative Schedule.

Homework due: Week one homework.

Lecture: Text 5.2.

Lecture Math:

Lab: Work on projects.

Class 6 Tentative Schedule.

Lecture: Text 

Lecture: Math.

Lab: Work on projects.

Class 7 Tentative Schedule.

Lecture: Text 

Lecture: Math.

Lab: Work on projects.

Class 8 Tentative Schedule.

Lecture: Text 

Lecture: Math.

Lab: Work on projects.

Class 9 Tentative Schedule.

Homework due: Week two homework due.

Lecture: Text 6.1

Lecture: Math.

Lab: Work on projects.

Class 10 Tentative Schedule.

Lecture:

Lecture: Math.

Lab: Work on projects.

Class 11 Tentative Schedule.

Lecture:

Lecture: Math.

Lab: Work on projects.

Class 12 Tentative Schedule.

Lecture: Review shop theory.

Lab: Work on projects.

Class 13 Tentative Schedule.

Week 3 Homework due.

Lecture: Text 6.3

Lecture: Math.

Lab: Work on projects.

Class 14 Tentative Schedule.

Lecture: Review shop theory.

Lab: Work on projects.

Class 14 Tentative Schedule.

Lecture: Review shop theory.

Lab: Work on projects.

Class 15 Tentative Schedule.

Homework: Week 4 due.

Lecture: Review shop theory.

Lab: All completed projects must be turned in.

Class 16 Tentative Schedule.

Final

Additional Information

 

E-mail rules.

1).The student will use only the e-mail address issued to that student by  Amarillo College when contacting instructor or when participating in a class assigned discussion .

2). When a assignment requires an e-mail it must be your Amarillo College e-mail address any other e-mail address will be discarded without being read or graded.

3). When communicating via e-mail you will correspond in a professional manner. Any e-mail containing language of a rude, obscene, sexually harassing, or threatening manner will immediately be reported to the Dean of Students and campus police.

4). No e-mails will be answered or graded if they are in the form of texting. Use proper spelling and punctuation in all your communication.  As the instructor I will not decipher texting I will discard it.

Syllabus Created on:

02/08/22 4:40 PM

Last Edited on:

02/08/22 4:40 PM