If you have a disability (learning, mental, physical) that affects your ability to participate effectively and have access to any program or service at Amarillo College please contact Disability Services at (806) 345-5639 . Our offices are located in the Enrollment Center, Suite 700. More information may be found at www.actx.edu/disability.
Disability Services facilitates access to all programs and services according to the ADA, Americans with Disabilities Act and Section 504 of the Rehabilitation Act, as well as other federal and state laws.
Amarillo College is committed to providing equal access to all programs and services, including all working, learning, and service environments that affect equal access for persons with disabilities. This commitment to provide equal access and opportunity for persons with disabilities is in compliance with federal and state law. Amarillo College also strives to provide Electronic and Information Resources (EIR) that are accessible to all authorized users.
If you find you are unable to access material in an accessible format please contact the Disability Services Office at (806) 345-5639 . This office will work in conjunction with other campus resources to address and accommodate your issue in a timely manner.
As a student you may experience a range of issues that can cause barriers to learning, such as strained relationships, increased anxiety, alcohol/drug problems, feeling down, difficulty concentrating and/or lack of motivation. These mental health concerns or stressful events may lead to diminished academic performance or reduce a student's ability to participate in daily activities. Amarillo College offers services to assist you with addressing these and other concerns you may be experiencing. If you or someone you know are suffering from any of the aforementioned conditions, you can learn more about the broad range of confidential mental health services available on campus by calling the AC Counseling Center at 806-371-5900. The AC Counseling Center website is https://www.actx.edu/counseling/ . Also, if you are in need of social services (affordable housing, utilities, transportation, food, clothing, childcare, medical/dental/vision, legal), please call the AC Advocacy & Resource Center at 806-371-5439. The AC Advocacy & Resource Center website is https://www.actx.edu/arc
Tutoring for Success applies to any student whose overall performance in the course falls below 75%. The instructor will create the task in the Student Engagement Portal (Watermark) to direct the student to the appropriate tutoring service, which may be faculty- or SI-led, discipline-specific, and/or general. The tutoring service assigned, the due date for when the tutoring must be completed, and the amount of tutoring required are at the discretion of the instructor. Additionally, the task will alert the student’s success team. Students who do not fulfill the assigned tutoring task may be subject to program- and course-specific penalties that could result in a grade reduction and/or in not being allowed to progress in the course until the tutoring requirement has been satisfied.
Students who do not attend class on or prior to the census date will be administratively dropped. Effective Fall, 2016
Students who wish to withdraw from a course must complete all steps indicated on the Academic Withdrawal Request form by the course withdrawal deadline.
NOTE: Students who are attending Texas institutions of higher education, for the first time fall 2007 and later, may not withdraw from more than six courses during their academic career. This withdrawal limitation does not include dual credit or developmental classes (Senate Bill 1231 Rule 4.10.) For more information on Drop and Withdrawal Policies, please visit the Registrar's Office Web site.
The Amarillo College Privacy Policy is found at https://www.actx.edu/-amarillo-college-privacy-notice , and applies to all Amarillo College students. If you have questions about this privacy statement or you believe that your personal information has been released without your consent, send email to humanresources@actx.edu .
AERM-1241-001 Wood, Fabric and Finishes
A course in the use and care of various covering materials, finishes and wood structures including approved methods and procedures. Safety also addressed.
Student ResourcesStudent Resources Website
Notice to Students enrolled in an educational program for preparation of issuance of certain occupational licenses:
Students enrolled in an educational program in preparation for obtaining certain occupational licenses are potentially ineligible for such license if the student has been convicted of an offense. For further information, please contact:
Melodie Graves
Justice Involved Advocate
Student Service Center 117
mgraves24@actx.edu
806-371-5995
Make appointment at https://melodiegraves.youcanbook.me
You can also contact the Legal Clinic, or the faculty member in charge of the educational program that you seek to enroll in. The further information you will receive will include notification to you of your right to request a criminal history evaluation letter from the licensing authority in order to clarify your particular situation.
(2 sem hrs; 1 lec, 2 lab)
On Campus Course
Your instructor can advise you where to purchase textbooks or, if available, provide you with an electronic copy.
Nevertheless, students are ultimately responsible to obtain required text books. Most of the required text books for this class can be printed in the AC Computer Lab. Students should apply monies to TRAC Systems Print Card or AC Student ID Card. Credit can be applied at the TRAC System ATM located in the Student Service Center (Campus Side) foyer. Note: Textbook revisions can change without notice, therefore, the current revision at time of purchase are acceptable.
1. Dictionary of Aeronautical Terms, 5th edition, 2013, paperback;(ASA-DAT-5); ISBN-13:978-1560278641
2. Aviation Mechanics Handbook: The Aviation Standard, 6th Edition, (ASA-MHB-5); ISBN 13:978-1560278986
3. FAR/AMT 2019: Federal Aviation Regulations for Aviation Maintenance Technicians; 2014 edition, 2013, paperback; ISBN-13:978-1560279983
4. AC - 43.13 1B/2B - Acceptable Methods, Techniques and Practices of Aircraft Inspection and Repair, 2009, paperback; ISBN-13:978-0977489695
5. A&P Technician Airframe Textbook; 2009, paperback; ISBN 13:978-0884875604
6. A&P Technician Airframe Test Guide with Oral & Practical Study Guide, 2009, paperback; ISBN-13:978-0884875444
Students are required to have the following supplies:.
1. 2GB Memory Stick
2. 3-Ring Binder/with paper, pens and pencils
3. Fine Black and Silver 'Sharpie' - 2 each
4. Safety Glasses
5. Red ink pen or marker
6. Calculator: non-programable (TI-30 preferred)
Initial_______
I.A.1 Service and repair wood structures.
I.A.2 Identify wood defects.
I.A.3 Inspect wood structures.
I.B.4 Select and apply fabric and fiberglass covering materials.
I.B.5 Inspect, test, and repair fabric and fiberglass.
I.C.6 Apply trim, letters, and touch up paint.
I.C.7 Identify and select aircraft finishing materials.
I.C.8 Apply finishing materials.
I.C.9 Inspect finishes and identify defects.
Items # I.A.1, I.A.2, I.A.3, I.B.4, I.B.5, I.C.6..................................................... Training Level (1)
Items # I.C.7, I.C.8, I.C.9................................................................................ Training Level (2)
In order to receive your AC Connect Email, you must log in through AC Connect at https://acconnect.actx.edu .
If you are an active staff or faculty member according to Human Resources, use "Exchange". All other students, use "AC Connect (Google) Email".
Class Policy:
1) No electronic devices, i.e. I-Phone, I-Pad, I-Pod, Blackberry, Droid, MP3, etc., (with instructor permission only) allowed during class and shop time. All violations shall be annotated in the student attendance record. Students with electronic devices will be considered as an unexcused absent.
2) Sleeping (or the appearance of sleeping) will not be tolerated, (this will exclude break times). This will counted toward unexcused absence at a minimum of one hour per occurrence.
3) No workout/sweat pants, sandals, or sleeveless shirts allowed in shop area. Shoes must fully cover feet. No worn or shredded clothing allowed due to machines and metal shavings. You will not be allowed to work in shop with any of the above violations. Shorts can be worn providing the are not "cutoffs", must be solid color and length must be at or just above knee
4) No food or drink allowed in shop area.
5) No tobacco products allowed in shop area.
6) No alcohol or drugs on school property.
7) Absolutely No Horseplay!!! Due to the nature of work and in practice of professional work ethic, horseplay will not be tolerated in any form.
8) No Profanity!
9) Safety glasses will be worn at all times in a work area.
10) Face shields will be worn when operating machinery. (i.e. drill presses, grinders, cut-off tools)
11) Know where the closest fire extinguisher is located to your work area. Know where the closest exit is to your work area. Know where MSDS material is located. Know where eye wash is located. Know where first aid kit is located.
12) Inform instructor of any accidents no matter how small that incur on college property.
13) Do not leave class without informing instructor.
14) Watch out for others. They may be unaware of a potential hazard.
15) School uniforms are mandatory. (Student are considered absent without the proper uniform or dress attire). Unless otherwise directed school uniform shirts must be tucked in.
16) No hats, hoodies, beanies, etc. are to be worn in the classroom.
17) Long hair must be tied back or pulled up when operating any "rotary" type tooling. examples (not limited to) Grinders, routers, drill motors screw guns/drill motors, drill press, di grinders etc..
18) Required Tools (see ‘Additional Information’) - Student are considered absent without the tools specified in the required tools list.
19) Participation in daily shop / classroom clean-up. Non-participation will result in project grade deduction.
20) Students whose behavior results in classroom disruption, will be removed from the classroom. (Missed time will be considered unexcused)
NOTE: Any violations may warrant significant grade reduction for individual, group or the entire class. Severity of violation may warrant expulsion from class or complete expulsion from course. Safety is taken seriously at Amarillo College.
Grading Criteria and Procedures
Grade points (assigned according to the performance of a student in each course as dictated by industry)
A - Excellent performance (100 - 90 ) = 4.00 grade points
B - Above job entry level ( 89 - 80 ) = 3.00 grade point
C - Minimum requirement ( 79 - 70 ) = 2.00 grade points
F - Below job entry level ( 69 - 0 ) = 0 grade points
Weighted Grade
All Aviation maintenance Technology courses must be completed with a grade of 70% or better for Amarillo College Airframe Certificate of Completion on all quizzes, labs, and exams.
1. Theory Average (average of all exams)- - - 1/3 of final grade
2. Shop Average (average of all projects) - - - - - - - - - - - - - - 1/3 of final grade
3. Quiz Average (average of quizzes)- - - - - - - - - - - - - - - - - 1/3 of final grade
Note: In addition to course "Weighted Grade" the Final Exam must have a minimum passing grade of 70%. Final Exam will be a stand-alone grade which will not be calculated in Weighted Grade average.
Grade Calculation Procedure for each course section:
1. Add Quizzes then divide by the total number of quizzes to calculate Quiz Average.
2. Add all Exams, Regular Exams to calculate Exam Average.
3. Add Exam Average Grade then divide by two to obtain Theory Average.
4. Add all Project grades then divide by the total number of projects to calculate Shop Grade average. S
5. Add Theory Average, Shop Grade Average and Quiz Average then divide by three to calculate the Course Average.
Other Performance Indicators
CR - Credit for Transfer, Advance Standing, Testing Out*.
*Testing out must meet the requirement of Federal Aviation Regulation; Part 147.
I - Incomplete
W - Withdrew from Course/Program
Au - No Grade Points or Grade Computed
S - Satisfactory (Continuing Education)
U - Unsatisfactory (Continuing Education)
Testing and grading Procedures
1. Each exam may be retaken only once (including regular and final exams). It will be the instructors discretion if a retake for any failed open book exam will be given.
Note: During exam retake the exam may be different than the original i.e questions, formatting, etc.. Instructor will provide in Blackboard any additional grading criteria for the retake exam(s).
2. The maximum recorded grade on any exam retake will be 70%. Providing the retake had a passing score.
3. At the discretion of the instructor; there will be no retake of missed or failed daily quizzes.
4. All tests and projects should be completed or made up in the course in which they occur, any late items / documents will receive a maximum score of 70%.
5. Retake of failed final exam must be done within time and dates outlined in the AMT Repair Station Manual and written contract with Amarillo College for Incomplete grade on a case by case basis.
6. Final exam must be taken with black or blue ink, also unless otherwise directed all other exams can use #2 lead pencil.
7. Incomplete exam answer sheet header information will result in a 1 test point deduction for each item. Name, Date and Exam title including AC course number.
8. Any papers i.e. projects, quizzes, handouts, etc. turned in for grading without students full name or where applicable incorrect date format will result in point deduction(s) Unless otherwise stated date format is 8 digit, i.e. 05/01/2024. Also, any papers or items turned in for grading without students full name will automatically receive a zero for that paper / document.
9. Quizzes / open book exams may be given at the instructor's discretion. Student must be present to take daily quizzes / open book exams unless previous arrangements have been made with the instructor.
10. Any graded papers (projects, tests, handouts, etc.) received after grading has occurred will be considered late and the maximum grade of 70 will be assessed or assigned. Papers not turned in for grading ( during the course) will receive a zero for the project.
Grading: is when the project, test, etc. grade is entered into students college transcript. The instructor has full discretion for assignment due dates and times. Any item marked "quiz" not turned in for grading will receive a zero for that quiz.
11. A grade of "S" (Satisfactory) can be given on shop projects at Instructor's discretion. Final grade determination for course will have a numerical grade given for shop projects.
12. Project grade deduction may be given if a student knowingly breaks a shop item(s), or if shop projects are not worked in accordance with supporting instructions or documentation. Unless otherwise stated grade deduction will be 10 points per infraction, percentage points may be used for certain grading criteria.
13. Depending on course project the project grade deduction can be given individually, by group/team or full class. Student(s) will be notified on the project deduction criteria. Unless otherwise stated project grade deduction will be 10 points per infraction, percentage points may be used for certain grading criteria.
14. Amarillo College uses Blackboard grading/course management system, it is imperative to check the Blackboard course frequently for course information or announcements. The instructor may choose to affix quizzes or other documents in Blackboard that could have an associated grade for such documents. Any documents in Blackboard that will be graded will have instructions stating the grading criteria.
Attendance and Time Policies
Amarillo College AMT program must follow the guidelines per the FAA requirements for AMT schools
Punctual and regular attendance is a requirement in all classroom, laboratory and shop sessions. Excused absences are: sickness or injury, with a doctor's statement or at the discretion of the Accountable Manager. All other absences and tardy are unexcused. Any "No Call, No Show" for class will be considered unexcused. Please note; Class instruction will still be given which could have a quiz or test grading component that the student may not have received the information due to being absent or tardy.
Students will be counseled in writing by the Instructor of Record for lack of attendance using form AMTS-130. If an instructor decides that the student is not keeping up with the class due to absences, the Instructor of Record may recommend to the Program Coordinator, in writing, that the student withdraw from the course.
Upon accumulation of 3 unexcused absences, or approaching 25% of time missed, which indicates that the student has jeopardized their progress and will advise the student to withdraw from the course. It will be the student’s responsibility to officially withdraw from the course. Failure to take the proper actions will result in the student receiving an “I”, incomplete, or a grade of “F”, Failure, for the course. A copy of this notice will be placed in the student’s file.
Procedure: The Instructor of Record may email the Program Coordinator with notice that the student has jeopardized their progress and has been advised to withdraw from the course.
Students withdrawing from a course must go through a formal procedure. Specific dates and procedures are outlined in the college catalog. Also, no withdrawal is official unless it is processed by the Registrar’s Office. Until that time, the student will remain on the class roll, and may receive a final grade of “F”.
1. EXCUSED ABSENCES During the day of a regular exam (including Final Exam) or quiz will be made up without penalty. Make up exam or quiz will be taken / given at the CONVENIENCE of the instructor.
2. UNEXCUSED ABSENCES / TARDY during day of a regular exam will result in a maximum possible test grade of 50 percent.
During day of final exam any tardy will result in being issued an "incomplete" contract and final exam will be given at the instructors discretion.
3. Daily classroom / shop break times will be given at the instructors discretion. Without prior arrangements students returning late after break time ends will be considered absent (unexcused).
4. Unless prior arrangements have been made; restroom break time should be limited to the minimal amount of time, excessive use or time away from class / shop could result in the (unexcused) time.
Tardiness
A student's tardiness, (3 or more), may result in:
1. A written warning against further tardiness from the instructor.
2. Being placed on probation for the course.
3. Being issued a grade of "F" for the course.
Note: Unexcused tardy will still be counted even if you contacted the instructor prior to class start time. Excused tardy will be handled on a case by case basis.
The instructor may choose to begin class/lecture by securing the classroom door to prevent interruptions by late arriving students. It is in the student's best interest to be in class early.
If a student arrives late and is "locked out", he/she may rejoin the class at the next scheduled break time. Attendance begins when the student rejoins the class
Day 1.1 I.A.1, I.A.2, I.A.3 Project Number 1
Description: Inspect wood structures, identify wood defects, service and repair wood structures.
Performance: Correctly respond to questions in project to identify, service, and repair defects in wood structures.
Procedure: Follow project steps to completion.
Instruction Time: 5 hours Lecture 2 hours Project 3 hours
Day 1.3 Test #1 ( I.A.1, I.A.2, I.A.3 )
Day 1.3 I.B.4 Project Number 2
Description: Select and apply fabric and fiberglass covering materials.
Performance: Correctly respond to questions in project and follow steps in project to select and apply covering materials.
Procedure: Follow project steps to completion.
Instruction Time: 8 hours Lecture 2 hours Project 6 hours
Day 1.4 I.B.5 Project Number 3
Description: Inspect, test, and repair fabric and fiberglass.
Performance: Correctly respond to questions in project and follow steps in project to inspect, test, and repair fabric and fiberglass.
Procedure: Follow project steps to completion.
Instruction Time: 8 hours Lecture 1 hours Project 7 hours
Day 2.2 I.C.6 Project Number 4
Description: Apply trim lettters, and touch up paint.
Performance: Correctly respond to questions in project and follow steps in project to apply trim, letters, and touch up paint.
Procedure: Follow project steps to completion.
Instruction Time: 6 hours Lecture 1 hours Project 5 hours
Day 1.4 Test #2 ( I.B.4, I.B.5, I.C.6 )
Day 2.3 I.C.7, I.C.8 Project Number 5
Description: Identify, select, and apply aircraft finishing materials.
Performance: Correctly respond to questions in project and follow steps in project to identify, select, and apply aircraft finishing materials.
Procedure: Follow project steps to completion.
Instruction Time: 17 hours Lecture 2 hours Project 15 hours
Day 2.4 I.C.9 Project Number 6
Description: Inspect finishes and identify defects.
Performance: Correctly respond to questions in project and follow steps in project to inspect finishes and identify defects.
Procedure: Follow project steps to completion.
Instruction Time: 4 hours Lecture 2 hours Project 2 hours
Day 4.1 Final Test ( I.A.1, I.A.2, I.A.3, I.B.4, I.B.5, I.C.6, I.C.7, I.C.8, I.C.9 )
The following are required:
Students are required to maintain there AC Connect log-in and password.
AMT Tool List
Note: Tools may be purchased from any source. The school does not endorse or recommend any particular manufacturer. The school only advises the student to purchase quality products for future use in industry after completion of the course. Student may be considered absent until tools are provided.
Qty: | Tool Name: | Size: | Initial |
1 | Socket Set (Ratchet, 12pt. Shallow, 12 pt. Deep, 3” 6” extensions, u-joint) | 3/8” Drive | |
1 | Socket Set (Ratchet, 12pt. Shallow, 12 pt. Deep, 3” 6” extensions, u-joint) | 1/4" Drive | |
1 | Combination Wrench Set (12 pt.) | 1/4” – 1” | |
1 | Flat File Single Cut | 8-10” | |
1 | Round File Double Cut | 8-10” | |
1 | Half Round File Double Cut | 8-10” | |
1 | File Handle | Adjustable | |
1 | File card | N/A | |
3 | Drill Bits | #40 | |
3 | Drill Bits | #30 | |
3 | Drill Bits | #21 | |
1 | Drill Bits | #11 | |
1 | Drill Bits | 1/4" | |
1 | Pin Punch | 3/32” | |
1 | Pin Punch | 1/8” | |
1 | Pin Punch | 5/32” | |
1 | Pin Punch | 3/16” | |
1 | Chisel | 1/4" | |
1 | Chisel | 3/8” | |
1 | Center Punch | N/A | |
1 | Automatic Center Punch | N/A | |
1 | Hack Saw W/Blade | Adjustable | |
1 | Ball Peen Hammer | 12 oz. | |
1 | Plastic Tip Hammer | 12 oz. | |
1 | Right Cut Aviation Snips | N/A | |
1 | Left Cut Aviation Snips | N/A | |
1 | Center Cut Aviation Snips | N/A | |
1 | Slip Joint Pliers | 6” | |
1 | Side Cut / Diagonal Pliers | 6” | |
1 | Needle nose Pliers | 6” | |
1 | Duck Bill Pliers | 6” | |
1 | Tongue and Groove Pliers | 8” | |
1 | Needle Nose Vise Grip | 6” | |
1 | Standard Vise Grip | 6” | |
1 | Snap Ring Pliers (Combination in/out-side) | N/A | |
1 | Flat Bade Screw Driver | 1/8” X 3” | |
1 | Flat Bade Screw Driver | 1/4" X 2” | |
1 | Flat Bade Screw Driver | 1/4" X 4” | |
1 | Flat Bade Screw Driver | 1/4" X 6” | |
1 | Phillips Screw Driver | #0 X 3” | |
1 | Phillips Screw Driver | #1 X 4” | |
1 | Phillips Screw Driver | #2 X 2” | |
1 | Phillips Screw Driver | #2 X 4” | |
1 | Allen Wrench Set | .05-1/4” | |
1 | Deep Aviation Spark Plug Socket | 1/2" Dr. X 7/8” | |
1 | Socket Adaptor | 3/8” Dr. F X 1/2" Dr. M | |
1 | Combination Square | 12” | |
1 | Protractor | N/A | |
1 | Feeler Gage (offset) | To .035” | |
1 | Scribe | 6” | |
1 | Measuring Tape | 12’ | |
1 | Dividers | 6” | |
1 | Steel Rule | 6” in 64ths / 100ths | |
1 | Mechanical Fingers | N/A | |
1 | Magnetic Pick-up Tool | N/A | |
1 | Inspection Mirror | N/A | |
1 | Sealed Beam Flashlight | N/A | |
1 | Multi-meter (W / Continuity & Temp. Probe) | N/A | |
1 | Tool Box (W / Drawers) Roll Away Pref. | N/A | |
1 | Leather Gloves (Welding) | Insulated | |
1 | Welding Goggles | At least #5 Shaded lens | |
1 | ANSI Approved Safety Glasses | Clear Lens | |
1 | Air Nozzle | N/A | |
1 | Protractor | 180º | |
1 | Compass | leaded | |
1 | Dial Calipers | 6” | |
1 | Ruler | 12” | |
1 | Calculator (Model TI-30XA) Pref. | Batt. Pwr. |
|
Along with the course syllabus the East Campus has created additional rules that must be followed by the student. Copies of the East Campus Code of Professional Conduct are posted throughout the facility.
Amarillo College Technical Education Code of Conduct
Welcome to the Amarillo College Technical Education Division. We wish you the best in your educational pursuit. It is our responsibility to provide you the education, training, and "hands-on" practice to become a professional in your chosen field in a safe environment. The instruction, equipment, and facilities are provided for your use as outlined by your Administration, Program Coordinator and Faculty. Studying, practicing, and learning are required by you.
As a participating student in Amarillo College Technical Programs, you will be expected to act, perform and train in a professional manner. The following rules and guidelines are to be followed by everyone for your safety and to foster a learning environment.
Attendance:
Unless it is an emergency, we highly recommend you not miss class. Recovery of missed information will be the responsibility of you (the student). Class begins at the scheduled time. If you are not in your seat in class or at the designated location during laboratory exercises, you will be counted tardy. You will be required to show an acceptable understanding of the topic(s) covered during your absence. Check syllabus for your instructor’s policy regarding attendance.
As a student of Amarillo Community College (ACC), you are a representative of the Technical Education Program and are expected to demonstrate professionalism through your attire and behavior.
Shirts
Pants
Headwear
Lab Attire
Personal Protective Equipment (PPE)
Tools / Equipment / Books / Supplies
Conduct
By adhering to this code of conduct, you reflect the dignity, pride, and respect that are hallmarks of industry professionals. Your commitment to these standards is essential for maintaining a productive educational environment and for the reputation of Amarillo College's Technical Education Program.
Failure to comply with these guidelines may result in disciplinary action according to Amarillo College policies and procedures.
Note: This code of conduct applies to all students enrolled in the Technical Education Program at Amarillo College. It is subject to change, and updates will be communicated as necessary. Always consult your instructor or advisor if you have any questions or concerns regarding the dress code and professional conduct expectations.
Syllabus Contract is required by all students, the contract signifies that you have received (aurally from the instructor), read and understood all items within the course syllabus. The course instructor will provide the syllabus contract in Blackboard for you to complete. Even if you do not sign the contract you are still obligated to fully understand and adhere to the course syllabus.
05/22/23 8:15 AM
04/29/24 12:09 PM